To: Lynn Avants
Cc: [EMAIL PROTECTED]
Subject: Re: [leaf-user] RealTek nic problem
In /etc/modules it appears to depend only on mii.o that I loaded.
Anny further sugestion ?
Alex
Cópia Lynn Avants [EMAIL PROTECTED]:
On Thursday 12 June 2003 03:40 pm, [EMAIL PROTECTED] wrote:
I have a NIC
I had the same problem however when using the:
rtl8139
module - all seams to work OK... I can't speak to why the 8139too do not
work though...
Best regards
Jorn
I have a NIC with a RealTek chipset that in full linux distributions
works with the 8139too module.
In Bering 1.2 I loded the mii.o
On Thursday 12 June 2003 03:40 pm, [EMAIL PROTECTED] wrote:
I have a NIC with a RealTek chipset that in full linux distributions
works with the 8139too module.
In Bering 1.2 I loded the mii.o module then when I try to load the
8139too.o module I got the error:
insmod: init_module: 8139too.o:
In /etc/modules it appears to depend only on mii.o that I loaded.
Anny further sugestion ?
Alex
Cópia Lynn Avants [EMAIL PROTECTED]:
On Thursday 12 June 2003 03:40 pm, [EMAIL PROTECTED] wrote:
I have a NIC with a RealTek chipset that in full linux
distributions
works with the 8139too
On Friday 13 June 2003 08:41 am, [EMAIL PROTECTED] wrote:
In /etc/modules it appears to depend only on mii.o that I loaded.
Anny further sugestion ?
It's _really_, _really_ hard to say. You have the disk and all the
configuration there and all I have seen is a couple of interpretations
made by
In /etc/modules it appears to depend only on mii.o that I loaded.
Download the bering .config and try compiling the 8139 driver into the
kernel. You could also try downloading Donald Becker's driver's from scyld
and patching that into your kernel. (Like Lynn says, don't forget
pci-scan!)
Le Vendredi 13 Juin 2003 21:45, Peter Mueller a écrit :
In /etc/modules it appears to depend only on mii.o that I loaded.
Download the bering .config and try compiling the 8139 driver into the
kernel. You could also try downloading Donald Becker's driver's from scyld
and patching that into
I have a NIC with a RealTek chipset that in full linux distributions works
with the 8139too module.
In Bering 1.2 I loded the mii.o module then when I try to load the 8139too.o
module I got the error:
insmod: init_module: 8139too.o: Operation not supported by device
What am I missing ?
Thanks,