6 AM
Subject: Re: [leaf-user] dachstein question
> Did you uncomment pci-scan and make sure its entry is above the nic module
> entry in your modules file as mentioned in my previous post? That is
> probably the problem.
>
> S
>
>
> >From: "steve crowl" <[EMA
At 11:33 AM 5/1/02 -0500, steve crowl wrote:
>Yes, it appears the NICs are not initializing. As another thread observed,
>there is no /proc/pci file, either. I am using rtl8139.o driver from
>http://lrp.steinkuehler.net/files/kernels/Dachstein-normal/modules/net/rtl81
>39.o
>
>If I try manual inst
Did you uncomment pci-scan and make sure its entry is above the nic module
entry in your modules file as mentioned in my previous post? That is
probably the problem.
S
>From: "steve crowl" <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Subject: Re: [leaf-user
they
> are PCI nics make sure that pci-scan is loading before the NIC modules.
>
> S
>
>
> >From: "steve crowl" <[EMAIL PROTECTED]>
> >To: <[EMAIL PROTECTED]>
> >Subject: [leaf-user] dachstein question
> >Date: Tue, 30 Apr 2002 11:50:39
On Tuesday 30 April 2002 11:50, steve crowl wrote:
> Hello. I received the following log message attempting to run
> dachstein (I have successfully run eigerstein on same configuration):
>
> firewall dhcpd: No subnet declaration for eth1 (0.0.0.0).
> firewall dhcpd: Please write a subnet declarati
re the NIC modules.
S
>From: "steve crowl" <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Subject: [leaf-user] dachstein question
>Date: Tue, 30 Apr 2002 11:50:39 -0500
>
>Hello. I received the following log message attempting to run dachstein (I
>h
om: "steve crowl" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Date: Tue, 30 Apr 2002 11:50:39 -0500
> Subject: [leaf-user] dachstein question
>
> Hello. I received the following log message attempting to run
> dachstein (I have successfully run eigerstei
At 11:50 AM 4/30/02 -0500, steve crowl wrote:
>Hello. I received the following log message attempting to run dachstein (I
>have successfully run eigerstein on same configuration):
>
>firewall dhcpd: No subnet declaration for eth1 (0.0.0.0).
>firewall dhcpd: Please write a subnet declaration in you
Hello. I received the following log message attempting to run dachstein (I
have successfully run eigerstein on same configuration):
firewall dhcpd: No subnet declaration for eth1 (0.0.0.0).
firewall dhcpd: Please write a subnet declaration in your dhcpd.conf file
for the
firewall dhcpd: network s
