Thanks Andrew!. Increasing syst_size to 60M solved it. Looking back I guess I
really had 2 issues, this one and the fact that I had left an internal compact
flash in the PC without completely disabling it in the BIOS. The PC was booted
from a thumb drive and the hdsupp package(s) was loaded b
Hi.
It seems like there is no enough free space into ram disk. You should
just increase syst_size into leaf.cfg.
20.09.2013 16:03, Jim Munro пишет:
> Hi all,
>
>
>
> It seems that loading hdsupp in leaf.cfg breaks selection f)Find and
> load modules for hardware in the configuration menu. Not
Hi all,
It seems that loading hdsupp in leaf.cfg breaks selection f)Find and
load modules for hardware in the configuration menu. Noticed when I did
an upgrade from a pre 4.3 release to 5.0.1. Causes tar: write error: No
space left on device. In the end, I discovered I no longer need to u
> I'm trying to upgrade my installations to dachstein cd and I didn't found
the hdsupp & hdsupp_s packages
> can I use the old ones from charles' site ?
You should be able to...at least I haven't heard from anyone who's had
problems with them yet, and several folks have reported getting HDD insta
Hi,
I'm trying to upgrade my installations to dachstein
cd and I didn't found the hdsupp & hdsupp_s
packages
can I use the old ones from charles' site
?
Thanks a lot
Etienne
Hi,
A few days ago, I set up a hard disk on my leaf
system ( tu use squid It works)
I followed the Charles's hard disk howto
(thanks Charles).
I used the hdsupp.lrp and hdsupp_s.lrp from
lrp.steinkuehler.net but is seems that
one shared library is missing from the hdsupp_s
package.
