On Wednesday 05 March 2003 03:31 pm, Matt Russell wrote:
> alright, this is what i'm trying to do:
>
> on the original rc2 image, i had a ppp server setup so that my boss could
> dialin to the lrp and get internet access. since i've upgraded to 1.0 and
> then to 1.1, i have not been able to achiev
tty.
is there any reason that the mgetty.lrp that worked with rc2 will NOT work
with 1.1??
thanks,
matt
-Original Message-
From: Ray Olszewski [mailto:[EMAIL PROTECTED]
Sent: Tuesday, March 04, 2003 4:12 PM
To: Matt Russell; [EMAIL PROTECTED]
Subject: Re: [leaf-user] why isn't
Matt,
On Tue, 04 Mar 2003 15:59:20 MST Matt Russell wrote:
> Module installs fine but won't bring up the modem. Hardware is fine since it
> can still be brought up in rc2 without any hesitation. anyone have any
> ideas?
Early in the Bering RC series, serial support was via a kernel
module and
> Module installs fine but won't bring up the modem. Hardware is fine since
> it
> can still be brought up in rc2 without any hesitation. anyone have any
> ideas?
That would have to do with mgetty and inittab, you might want to look into
configuring these per the Bering Users Manual or a PPP how
At 03:59 PM 3/4/2003 -0700, Matt Russell wrote:
Module installs fine but won't bring up the modem. Hardware is fine since it
can still be brought up in rc2 without any hesitation. anyone have any
ideas?
Serial drivers do not "bring up" modems. They provide communication
between the kernel and a U
Module installs fine but won't bring up the modem. Hardware is fine since it
can still be brought up in rc2 without any hesitation. anyone have any
ideas?
thanks,
matt
---
This SF.net email is sponsored by: Etnus, makers of TotalView, The deb