Thanks
Does the i82365 module also replaces the serial_cs.o (which we need for
a modem) or is there another according module in this configuration?
Vladimir I. wrote:
Try the latest test WISP-Dist release from
http://www.hazard.maks.net/wisp-dist/downloads.
Also, WISP-Dist does not use
No, serial_cs is serial_cs. :) Grab the modules package from
http://www.hazard.maks.net/wisp-dist/downloads and take whatever
modules you need.
Nicolas Cedraschi wrote:
Thanks
Does the i82365 module also replaces the serial_cs.o (which we need for
a modem) or is there another according module
hi everybody,
for our wisp setup (2.4.18) we would need the above mentionned modules
to access a modem via minicom.
serial_cs we found in the pcmcia.lrp package. When we tried to load, it
gave us the following error:
serial_cs: Card Services release does not match!
Where could we get the
Try the latest test WISP-Dist release from
http://www.hazard.maks.net/wisp-dist/downloads.
Also, WISP-Dist does not use in-kernel PCMCIA drivers, so there is no
yenta_socket conf, it uses i82365 and other modules instead. I found
them to be more flexible than yenta_socket which doesn't work on
