You will have to obtain dridge.o it is on the Bering site and use the
instructions how to add the module to your disk and uncomment in the
modules list like ethernet cards, check the Bering installation guide.
Hope this help you.
Larry Platzek [EMAIL PROTECTED]
On Thu, 23 May 2002, Darren Wri
ECTED]
> Subject: Re: [leaf-user] Bering RC2 and bridge
>
>
> You will have to obtain dridge.o it is on the Bering site and
> use the instructions how to add the module to your disk and
> uncomment in the modules list like ethernet cards, check the
> Bering installation guide.
Ok I have the bridge software working now.I found the right bridge.o
file.
HOWEVER.
I've got both ethernet interfaces to work properly..Prism II wireless is
ETH0 and the 3c589 is ETH1.
When I get the bridge going and assign it an IP address, it is not
pingable, and no traffic is passing.
I
Le Jeudi 23 Mai 2002 20:21, Darren Wright a écrit :
> Ok I have the bridge software working now.I found the right bridge.o
> file.
>
> HOWEVER.
>
> I've got both ethernet interfaces to work properly..Prism II wireless is
> ETH0 and the 3c589 is ETH1.
>
> When I get the bridge going and assign
I waited to reply in case someone else saw an "obvious" answer to your problem.
If you can't ping and can't pass traffic, by what definition of "working"
is "the bridge software working now"? And how do you know that you've "got
both ethernet interfaces to work properly"?
What *does* work? Doe