A few details to consider.
1. My copy of the Bering 1.2 modules tarball has 2 different 3c59x.o
modules in it -- one in ./2.4.20/net, the other in
./2.4.20/kernel/drivers/net . They are different sizes so, presumably,
different in some way that matters in use. Which did you try (or did you
try
The nearest I've got is a number of GX110's that have the 3C905B
onboard. They work fine with Bering 1.2 & Bering-uClibc-2.0
I had to pop the case and look at the surface mount chips on the
motherboard to check exactly what version I had. The Dell site lists
both 3C905B and 3C905C (3C920) for t
With Bering, using the 3c59x.o module found via the Bering installation
guide, neither interface is brought up.
Did you try to append a boot-Parameter like
ether=0,0,eth0 ether=0,0,eth1
The exact syntax for ether= may be found in the ethernet-howto:
snip
There are two ways that you can enable
Wouldn't this be accomplished in the modules config, where you identify
the modules you want to load?
=
#ne2k-pci
# card1,card2
#ne io=0x300,0x350
=
As I found out, some modules (3c509 for example) don't take these
arguments, some modules do (smc-ultra). I would grab the
2004 2:10 PM
To: [EMAIL PROTECTED]
Subject: Re: [leaf-user] Bering can't handle Dell GX150 integrated
Ethernet?
A few details to consider.
1. My copy of the Bering 1.2 modules tarball has 2 different 3c59x.o
modules in it -- one in ./2.4.20/net, the other in
./2.4.20/kernel/drivers
ginal Message-
From: Tibbs, Richard [mailto:[EMAIL PROTECTED]
Sent: 22 January 2004 13:44
To: Tony
Cc: [EMAIL PROTECTED]
Subject: RE: [leaf-user] Bering can't handle Dell GX150 integrated
Ethernet?
Thanks... Got it Resolved. See Below.
Had to use the "other" 3c59x.o in .../2.4.2
