IPQ806x AP148 and DB149 boards didn't have the UCI ubootenv section initialized, so the usage of fw_printenv required manual configuration. With this change, the "fw_printenv" and "fw_setenv" command will automatically work on NOR and NAND based platforms.
Signed-off-by: Ram Chandra Jangir <rjan...@codeaurora.org> --- Changes since v1: *Updated based on review comments. package/boot/uboot-envtools/files/ipq | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/package/boot/uboot-envtools/files/ipq b/package/boot/uboot-envtools/files/ipq index 16c7ba6..164ced0 100644 --- a/package/boot/uboot-envtools/files/ipq +++ b/package/boot/uboot-envtools/files/ipq @@ -13,7 +13,28 @@ touch /etc/config/ubootenv board=$(ipq806x_board_name) +ubootenv_mtdinfo () { + UBOOTENV_PART=$(cat /proc/mtd | grep APPSBLENV) + mtd_dev=$(echo $UBOOTENV_PART | awk '{print $1}' | sed 's/:$//') + mtd_size=$(echo $UBOOTENV_PART | awk '{print "0x"$2}') + mtd_erase=$(echo $UBOOTENV_PART | awk '{print "0x"$3}') + nor_flash=$(find /sys/bus/spi/devices/*/mtd -name ${mtd_dev}) + + if [ -n "$nor_flash" ]; then + ubootenv_size=$mtd_size + else + # size is fixed to 0x40000 in u-boot + ubootenv_size=0x40000 + fi + + sectors=$(( $ubootenv_size / $mtd_erase )) + echo /dev/$mtd_dev 0x0 $ubootenv_size $mtd_erase $sectors +} + case "$board" in +ap148 | db149) + ubootenv_add_uci_config $(ubootenv_mtdinfo) + ;; ea8500) ubootenv_add_uci_config "/dev/mtd10" "0x0" "0x20000" "0x20000" ;; -- 2.7.2 _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev