From: Weijie Gao <hackpas...@gmail.com>
Netgear WNDR4500v3 uses one SPI-NOR and one SPI-NAND. The bootloader and
caldata are on the SPI-NOR flash, and the firmware is on the SPI-NAND flash.
Hardware specification:
CPU: QCA9563
Switch: QCA8337N
5.8GHz Wifi: AR9580
SPI-NOR: 2MB
SPI-NAND: 128MB
DDR2: 128MB
WNDR4300v2 is similar to WNDR4500v3 but not tested and not included here.
Signed-off-by: Weijie Gao <hackpas...@gmail.com>
---
target/linux/ar71xx/base-files/etc/board.d/01_leds | 6 +
.../linux/ar71xx/base-files/etc/board.d/02_network | 1 +
target/linux/ar71xx/base-files/etc/diag.sh | 1 +
target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
.../ar71xx/base-files/lib/upgrade/platform.sh | 3 +-
.../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 11 +
target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 +
.../files/arch/mips/ath79/mach-wndr4500-v3.c | 233 +++++++++++++++++++++
.../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 +
target/linux/ar71xx/image/legacy.mk | 2 +
target/linux/ar71xx/image/nand.mk | 6 +
target/linux/ar71xx/nand/config-default | 3 +
12 files changed, 270 insertions(+), 1 deletion(-)
create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-wndr4500-v3.c
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds
b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 84b1a7dfd9..b4ebbd6173 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -828,6 +828,12 @@ wndr4300)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "netgear:green:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "netgear:blue:wlan5g" "phy1tpt"
;;
+wndr4500-v3)
+ ucidef_set_led_netdev "wan" "WAN (green)" "netgear:green:wan" "eth0.2"
+ ucidef_set_led_usbdev "usb1" "USB1" "netgear:green:usb1" "1-1"
+ ucidef_set_led_usbdev "usb2" "USB2" "netgear:green:usb2" "2-1"
+ ucidef_set_led_wlan "wlan2g" "WLAN2G" "netgear:green:wlan2g" "phy0tpt"
+ ;;
whr-g301n|\
whr-hp-g300n|\
whr-hp-gn)
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network
b/target/linux/ar71xx/base-files/etc/board.d/02_network
index ba54d89b8f..d455afad69 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -262,6 +262,7 @@ ar71xx_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
;;
+ wndr4500-v3|\
cr5000|\
dgl-5500-a1|\
dhp-1565-a1|\
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh
b/target/linux/ar71xx/base-files/etc/diag.sh
index 7753a7156d..6a392e790a 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -471,6 +471,7 @@ get_status_led() {
wndr3700|\
wndr3700v4|\
wndr4300|\
+ wndr4500-v3|\
wnr2000|\
wnr2000-v3|\
wnr2200|\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh
b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 7fd5fb4522..e44fa0d09a 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -1249,6 +1249,9 @@ ar71xx_board_detect() {
*"WNDR4300")
name="wndr4300"
;;
+ *"WNDR4500v3")
+ name="wndr4500-v3"
+ ;;
*"WNR1000 V2")
name="wnr1000-v2"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 05b5634aa5..12e920f46d 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -533,7 +533,8 @@ platform_check_image() {
r6100|\
rambutan|\
wndr3700v4|\
- wndr4300)
+ wndr4300|\
+ wndr4500-v3)
nand_do_platform_check $board $1
return $?
;;
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index ff9c3037a1..68fdd4db66 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1061,6 +1061,17 @@ config ATH79_MACH_WNDR4300
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_WNDR4500_V3
+ bool "NETGEAR WNDR4300v2/WNDR4500v3 board support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_USB
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_WNR2000
bool "NETGEAR WNR2000 board support"
select SOC_AR913X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 469b6a794c..01848846d7 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -232,6 +232,7 @@ obj-$(CONFIG_ATH79_MACH_WLR8100) +=
mach-wlr8100.o
obj-$(CONFIG_ATH79_MACH_WNDAP360) += mach-wndap360.o
obj-$(CONFIG_ATH79_MACH_WNDR3700) += mach-wndr3700.o
obj-$(CONFIG_ATH79_MACH_WNDR4300) += mach-wndr4300.o
+obj-$(CONFIG_ATH79_MACH_WNDR4500_V3) += mach-wndr4500-v3.o
obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o
obj-$(CONFIG_ATH79_MACH_WNR2000_V3) += mach-wnr2000-v3.o
obj-$(CONFIG_ATH79_MACH_WNR2000_V4) += mach-wnr2000-v4.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wndr4500-v3.c
b/target/linux/ar71xx/files/arch/mips/ath79/mach-wndr4500-v3.c
new file mode 100644
index 0000000000..51a56308ab
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wndr4500-v3.c
@@ -0,0 +1,233 @@
+/*
+ * NETGEAR WNDR4300v2/WNDR4500v3 board support
+ *
+ * Copyright (C) 2017 Weijie Gao <hackpas...@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-m25p80.h"
+#include "dev-nfc.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+/* QCA9563 GPIOs */
+#define WNDR4500V3_GPIO_LED_POWER_GREEN 5
+#define WNDR4500V3_GPIO_LED_POWER_AMBER 6
+#define WNDR4500V3_GPIO_LED_USB1 7
+#define WNDR4500V3_GPIO_LED_USB2 8
+#define WNDR4500V3_GPIO_LED_WPS 15
+#define WNDR4500V3_GPIO_LED_WAN_AMBER 16
+#define WNDR4500V3_GPIO_LED_WAN_GREEN 17
+#define WNDR4500V3_GPIO_LED_WLAN2G 19
+
+#define WNDR4500V3_GPIO_BTN_WPS 1
+#define WNDR4500V3_GPIO_BTN_RESET 2
+
+#define WNDR4500V3_GPIO_SPI_CS1 14
+
+/* AR9580 GPIOs */
+#define WNDR4500V3_WGPIO_LED_WLAN5G 7
+
+#define WNDR4500V3_WGPIO_BTN_WIRELESS 9
+
+#define WNDR4500V3_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WNDR4500V3_KEYS_DEBOUNCE_INTERVAL (3 *
WNDR4500V3_KEYS_POLL_INTERVAL)
+
+#define WNDR4500V3_LAN_MAC_OFFSET 0
+#define WNDR4500V3_WAN_MAC_OFFSET 6
+#define WNDR4500V3_WLAN_MAC_OFFSET 12
+#define WNDR4500V3_WMAC_CALDATA_OFFSET 0x1000
+#define WNDR4500V3_PCIE_CALDATA_OFFSET 0x5000
+
+static struct gpio_led wndr4500v3_leds_gpio[] __initdata = {
+ {
+ .name = "netgear:green:power",
+ .gpio = WNDR4500V3_GPIO_LED_POWER_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "netgear:amber:power",
+ .gpio = WNDR4500V3_GPIO_LED_POWER_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "netgear:green:wan",
+ .gpio = WNDR4500V3_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "netgear:amber:wan",
+ .gpio = WNDR4500V3_GPIO_LED_WAN_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "netgear:green:usb1",
+ .gpio = WNDR4500V3_GPIO_LED_USB1,
+ .active_low = 1,
+ },
+ {
+ .name = "netgear:green:usb2",
+ .gpio = WNDR4500V3_GPIO_LED_USB2,
+ .active_low = 1,
+ },
+ {
+ .name = "netgear:green:wps",
+ .gpio = WNDR4500V3_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+ {
+ .name = "netgear:green:wlan2g",
+ .gpio = WNDR4500V3_GPIO_LED_WLAN2G,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wndr4500v3_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WNDR4500V3_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNDR4500V3_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WNDR4500V3_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNDR4500V3_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wndr4500v3_wmac_gpio_keys[] = {
+ {
+ .desc = "Wireless button",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = WNDR4500V3_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNDR4500V3_WGPIO_BTN_WIRELESS,
+ .active_low = 1,
+ }
+};
+
+static struct ar8327_pad_cfg wndr4500v3_qca8337n_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_SGMII,
+ .sgmii_delay_en = true,
+};
+
+static struct ar8327_led_cfg wndr4500v3_qca8337n_led_cfg = {
+ .led_ctrl0 = 0xcc35cc35,
+ .led_ctrl1 = 0xcb37cb37,
+ .led_ctrl2 = 0x00000000,
+ .led_ctrl3 = 0x00f3cf00,
+ .open_drain = true,
+};
+
+static struct ar8327_platform_data wndr4500v3_qca8337n_data = {
+ .pad0_cfg = &wndr4500v3_qca8337n_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .led_cfg = &wndr4500v3_qca8337n_led_cfg,
+};
+
+static struct mdio_board_info wndr4500v3_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &wndr4500v3_qca8337n_data,
+ },
+};
+
+static struct spi_board_info wndr4500v3_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "m25p80",
+ },
+ {
+ .bus_num = 0,
+ .chip_select = 1,
+ .max_speed_hz = 50000000,
+ .modalias = "gd5f",
+ },
+};
+
+static struct ath79_spi_platform_data wndr4500v3_spi_data = {
+ .bus_num = 0,
+ .num_chipselect = 2,
+};
+
+static void __init wndr4500v3_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 tmpmac[ETH_ALEN];
+
+ ath79_register_spi(&wndr4500v3_spi_data, wndr4500v3_spi_info, 2);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wndr4500v3_leds_gpio),
+ wndr4500v3_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WNDR4500V3_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wndr4500v3_gpio_keys),
+ wndr4500v3_gpio_keys);
+
+ ap9x_pci_setup_wmac_btns(0, wndr4500v3_wmac_gpio_keys,
+ ARRAY_SIZE(wndr4500v3_wmac_gpio_keys),
+ WNDR4500V3_KEYS_POLL_INTERVAL);
+
+ ath79_init_mac(tmpmac, art + WNDR4500V3_WLAN_MAC_OFFSET, 0);
+ ath79_register_wmac(art + WNDR4500V3_WMAC_CALDATA_OFFSET, tmpmac);
+
+ ap9x_pci_setup_wmac_led_pin(0, WNDR4500V3_WGPIO_LED_WLAN5G);
+ ath79_init_mac(tmpmac, art + WNDR4500V3_WLAN_MAC_OFFSET, 1);
+ ap91_pci_init(art + WNDR4500V3_PCIE_CALDATA_OFFSET, tmpmac);
+
+ mdiobus_register_board_info(wndr4500v3_mdio0_info,
+ ARRAY_SIZE(wndr4500v3_mdio0_info));
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, art +
WNDR4500V3_LAN_MAC_OFFSET, 0);
+
+ /* GMAC0 is connected to a QCA8337N switch */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_register_eth(0);
+
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_WNDR4500_V3, "WNDR4500_V3", "NETGEAR WNDR4500v3",
+ wndr4500v3_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 5bc50a42ff..a4aa197e35 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -303,6 +303,7 @@ enum ath79_mach_type {
ATH79_MACH_WNDR3700, /* NETGEAR
WNDR3700/WNDR3800/WNDRMAC */
ATH79_MACH_WNDR3700_V4, /* NETGEAR WNDR3700v4 */
ATH79_MACH_WNDR4300, /* NETGEAR WNDR4300 */
+ ATH79_MACH_WNDR4500_V3, /* NETGEAR WNDR4500 v3 */
ATH79_MACH_WNR1000_V2, /* NETGEAR WNR1000 v2 */
ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */
ATH79_MACH_WNR2000_V3, /* NETGEAR WNR2000 v3 */
diff --git a/target/linux/ar71xx/image/legacy.mk
b/target/linux/ar71xx/image/legacy.mk
index b400e5ddbb..2808516ea0 100644
--- a/target/linux/ar71xx/image/legacy.mk
+++ b/target/linux/ar71xx/image/legacy.mk
@@ -274,6 +274,7 @@
wnr2000v4_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,3776k(firmw
r6100_mtdlayout=mtdparts=ar934x-nfc:128k(u-boot)ro,256k(caldata)ro,256k(caldata-backup),512k(config),512k(pot),2048k(kernel),122240k(ubi),25600k@0x1a0000(firmware),2048k(language),3072k(traffic_meter)
tew823dru_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro
wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata)ro,512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubi),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved)
+wndr4500v3_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(caldata_backup),64k(config),64k(traffic_meter),64k(pot),1408k(reserved),64k(caldata);spi0.1:2048k(kernel),23552k(ubi),25600k@0x0(firmware),2048k(language),128k(mtdoops),-(reserved)
nofwsplit
zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k@0x50000(firmware)
mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro
zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k(zyxel_rfsd),2048k(romd),1024k(header),2048k(kernel),-(ubi)
@@ -1016,6 +1017,7 @@ ifeq ($(SUBTARGET),nand)
$(eval $(call
SingleProfile,NetgearNAND,64k,WNDR3700V4,wndr3700v4,WNDR3700_V4,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR3700v4,"",-H
29763948+128+128,wndr4300))
$(eval $(call
SingleProfile,NetgearNAND,64k,WNDR4300V1,wndr4300,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR4300,"",-H
29763948+0+128+128+2x2+3x3,wndr4300))
+$(eval $(call
SingleProfile,NetgearNAND,64k,WNDR4500V3,wndr4500v3,WNDR4500_V3,ttyS0,115200,$$(wndr4500v3_mtdlayout),0x27051956,WNDR4500series,"",-H
29764821+2+128+128+3x3+3x3+5508012173,wndr4300))
$(eval $(call
SingleProfile,NetgearNAND,64k,R6100,r6100,R6100,ttyS0,115200,$$(r6100_mtdlayout),0x36303030,R6100,"",-H
29764434+0+128+128+2x2+2x2,wndr4300))
$(eval $(call
SingleProfile,ZyXELNAND,128k,NBG6716,nbg6716,NBG6716,ttyS0,115200,NBG6716,$$(zyx_nbg6716_mtdlayout),mem=256M))
diff --git a/target/linux/ar71xx/image/nand.mk
b/target/linux/ar71xx/image/nand.mk
index fafccb9b77..b4ae6c21d9 100644
--- a/target/linux/ar71xx/image/nand.mk
+++ b/target/linux/ar71xx/image/nand.mk
@@ -115,6 +115,12 @@ define LegacyDevice/WNDR4300V1
endef
LEGACY_DEVICES += WNDR4300V1
+define LegacyDevice/WNDR4500V3
+ DEVICE_TITLE := NETGEAR WNDR4500v3
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
+endef
+LEGACY_DEVICES += WNDR4500V3
+
define LegacyDevice/NBG6716
DEVICE_TITLE := Zyxel NBG 6716
DEVICE_PACKAGES := kmod-rtc-pcf8563 kmod-ath10k ath10k-firmware-qca988x
diff --git a/target/linux/ar71xx/nand/config-default
b/target/linux/ar71xx/nand/config-default
index 57318b38e8..6c50d6c071 100644
--- a/target/linux/ar71xx/nand/config-default
+++ b/target/linux/ar71xx/nand/config-default
@@ -183,6 +183,7 @@ CONFIG_ATH79_MACH_RAMBUTAN=y
# CONFIG_ATH79_MACH_WNDAP360 is not set
# CONFIG_ATH79_MACH_WNDR3700 is not set
CONFIG_ATH79_MACH_WNDR4300=y
+CONFIG_ATH79_MACH_WNDR4500_V3=y
# CONFIG_ATH79_MACH_WNR2000 is not set
# CONFIG_ATH79_MACH_WNR2000_V3 is not set
# CONFIG_ATH79_MACH_WNR2000_V4 is not set
@@ -230,6 +231,8 @@ CONFIG_MTD_NAND_BCH=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_BCH=y
# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_SPI_NAND=y
+CONFIG_MTD_SPI_NAND_DEVICES=y
# CONFIG_MTD_SPLIT_EVA_FW is not set
# CONFIG_MTD_SPLIT_SEAMA_FW is not set
# CONFIG_MTD_SPLIT_TPLINK_FW is not set
--
2.11.0
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
