RE: New Owner of a Woodchuck MA - Need documentation

2015-01-25 Thread James Fadenrecht
I only have the MA and parts for the IRT, so I can't do the comparison. I have noticed the IRT gears seem to be a thinner gauge than the MA. Both machines use a rectangular hole for loading on the gear head. "Okla Mike (Liltwisted)" may have a better comparison he can offer, based on prior co

Stuck pieces on Mill - does this work?

2015-01-25 Thread mwfoscue
I came across the below link on eBay.The headstock's "drive insert" is STUCK in the Morse taper sleeve.I even resorted to disassembling the headstock to try to get the two pieces apart.  No luck.I've tried "WD-40", "Liquid Wrench", and a couple others.  I've also tried placing the piece(s) in the f

RE: rope and beads

2015-01-25 Thread Bill Bulkeley
Real nice curt how did you do the rings Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Monday, 26 January 2015 12:12 PM To: Legacy-Ornamental-Mills Subject: rope and beads Hello everyone. I got some p

Re: Stuck pieces on Mill - does this work?

2015-01-25 Thread Milt On g
Use it routinely on rifle and pistol actions. Very positive results at least none have frozen up. Sent from my iPod > On Jan 25, 2015, at 6:48 PM, > wrote: > > I came across the below link on eBay. > The headstock's "drive insert" is STUCK in the Morse taper sleeve. > I even resorted to dis

Re: Stuck pieces on Mill - does this work?

2015-01-25 Thread Okla Mike (Liltwisted)
When I get a MT stuck I chase it out with a bolt from the outer hole. Then when the tension is maxed out, I use a 3/4" wrench between the thread and the dog drive or accessory installed and give it a little pry. On one rare occasion, with all the pressure from the bolt and prying with the wre

RE: Stuck pieces on Mill - does this work?

2015-01-25 Thread MAX LATHAM
You guys are just so interesting! The web site has an 8 oz can of liquid that Bill can get. https://websecure.cnchost.com/kanolabs.com/orders/order.shtmlI do enjoy all the engineering you folks do, but I'm just still learning.The other day there was a mention of machines which we have. Well, I

Re: rope and beads

2015-01-25 Thread Okla Mike (Liltwisted)
Nice Curt! You are just showing off now LOL Mike OK On 1/25/2015 7:11 PM, CURTIS GEORGE wrote: Hello everyone. I got some play time in the shop, this is just a test project but I thought some of you might like to see what I did. Any questions or comments are, As always welcome. C.A.G -- You

RE: Stuck pieces on Mill - does this work?

2015-01-25 Thread Bill Bulkeley
We faced stuck tapers before https://groups.google.com/forum/#!searchin/legacy-ornamental-mills/stuck$20tapers/legacy-ornamental-mills/bcnU6GwnpFg/Xq65Dq1zd2AJ here is some from the archives Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegrou

Re: Stuck pieces on Mill - does this work?

2015-01-25 Thread Tim Krause
Here's a web page that details removal of a stuck drive. Method number two has been 100% success rate for me. http://www.ornamentalmills.com/tips/stuck_headstock_drive/index.html -Tim - Original Message - From: Bill Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent:

Re: Stuck pieces on Mill - does this work?

2015-01-25 Thread Cole Andrews
Loctite makes a product I have used that " freezes" it and then you separate the two parts about two minutes later. I used it a few years on some 40 yr old hvac pulleys where a puller would not work and I slid it right off. On Sun, Jan 25, 2015 at 11:21 PM, Tim Krause wrote: > Here's a web page