BUY EXTRA !! :>)
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Joe G
Sent: Friday, November 03, 2017 6:51 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Need LOM dogs and split nut
Thanks guys for the help. I cal
Thanks guys for the help. I called Legacy and the man that answered said he
would have someone call me back and he thought they had the parts.
No call yet..fingers crossed!
On Fri, Nov 3, 2017 at 6:31 PM, CURTIS GEORGE wrote:
> Hello again Joe
>
> do you still have the old split nut? Its just
Hello again Joe
do you still have the old split nut? Its just the upper half you need? If so I
may be some help for you. I own a home made tap for the 5/8 x 4 acme screw. I
can tap a piece of durlin (SP?) plastic for you, then you can cut it to fit...
Please let me know if you still need help
Hello Joe.
The indexing hubs can still be bought through Legacy,I think they still use
them with there CNC units. If not I can get a friend of mine to have them cut
on a CNC laser. (check with Legacy first.)
Good luck on your project. the old steely units are still a very good machine,
no mat
On Fri, Nov 3, 2017 at 3:07 PM Russ Veinot wrote:
> 5/8th acme was used on my 1200 with aluminum rails. They still sold the
> split nut for mine (should be the same) as of a couple of months ago. Hope
> this helps.
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-orna
5/8th acme was used on my 1200 with aluminum rails. They still sold the
split nut for mine (should be the same) as of a couple of months ago. Hope this
helps.
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Joe Gassen
Sent: Fri
I sent an e-mail but later found this board.
I have an older steel rail LOM and have recently begun to use it again.
I need at least two of the 4 prong dogs that fit the headstock mad will
also need a split nut in the future for the 5/8 acme.
Any help will be appreciated since I see Legacy no long
I have dusted off (literally) the old steel rail LOM and trying to turn
legs for tables. I only have 2 of the "dogs" that fit the headstock and
need at least 2 more because I am doing 4 of these in steps and have to
mount and remount the dogs.
Also, while seeking things. I will need a split nut for
