Bill, Cells B4, C4, and I2 should be green and editable on the Sprocket
ratio sheet.
I found that I failed to unprotect I2. To make it editable go to
"Tools>Unprotect sheet"
and toggle it off. If you want to re-protect the sheet while leaving I2
editable, then
make I2 the current cell and unch
that seems like the best solution Dan.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
Ziegler Laser Worx LLC
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Fri, Oct 6, 2023 at 6:05 AM cdkr...@gmail.com wrote:
> Or just download this and overwrite the
After breaking a tooth off an acrylic gear, it motivated me to modify the
tail stock center from a friction center to a ball bearing center. By
turning and threading a 1/2" - 20 stub on the original shaft after cutting
the point off, I made the points interchangeable. I also noticed a great
in
I'm eventually going to change the lead screw to an 8 TPI acme, but that
heads the
wrong direction for what I really want to try: checkering. I think a 6"
pitch
will work on the 1 1/4" diameter I find comfortable for handles. I can
reach that
pitch with the stock gears that came with REVO. Th
Hey Dan,
That is where these mods were done is on my Revo also. Interchangeable too.
I'll see if I can find the pix later today.
Tim
On Fri, Oct 6, 2023, 11:08 AM cdkr...@gmail.com wrote:
> I'm eventually going to change the lead screw to an 8 TPI acme, but that
> heads the
> wrong direction f
Well the number of starts, just remember the amount you move the saddle between
starts must divide into the leadscrew tpi
For it to work but I’m sure you know that already.
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of cdkr...@gmail.com
Sent: Saturday, October 7, 202
looks pretty straight forward.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
Ziegler Laser Worx LLC
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Fri, Oct 6, 2023 at 8:24 PM wrote:
> Nice mod dan live centres are always better here is how I did it
