Thanks guys, you addressed my question perfectly.
Brandon
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
To unsubscribe from this group, send email to
l
g into the
bit.
I hope this clears it up.
-Tim
- Original Message -
From: "Brandon Khoury"
To:
Sent: Tuesday, January 22, 2013 8:41 AM
Subject: Re: Acounting for tear out
This is great information when milling flat stock, however, I think it becomes
a bit more compl
This is great information when milling flat stock, however, I think it becomes
a bit more complex when dealing with rotating stock. I do see how the
rotational direction of the stock is less important than what side the cutter
comes in from. The good thing for me is that most of my projects ar
ve that needs to be fully understood.
> Good luck on your table legs. send us some pictures of your work after you
> are done.
> Have a good day.
> C.A.G.
> - Original Message - From: "Brandon Khoury"
> To:
>
> >
> Sent: Monday, January 21, 2013 10:01 P
I'm working on a small end table and started turning the legs. I started to
get a little bit of tear out at the top of the leg which was set towards the
tail stock. I found this page,
http://legacywoodworking.com/technique.cfm?techniqueID=5, at Legacy's website
that addressed how to prevent t
