Re: Cutting threads on a 2" spindle.

t; > > > *From:* 'Curt George' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> > *Sent:* Monday, 5 April 2021 12:12 PM > *To:* 'Denson Ingram' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com

RE: Cutting threads on a 2" spindle.

Good video curt I like his solution to making fine threads Bill From: 'Curt George' via Legacy Ornamental Mills Sent: Monday, 5 April 2021 12:12 PM To: 'Denson Ingram' via Legacy Ornamental Mills Subject: Re: Cutting threads on a 2" spindle. Hello De

Re: Cutting threads on a 2" spindle.

per inch which is what I would use on > a 2 inch rod you would need to make custom gears.this can be done with > sprockets or with gears both a not a quick job. See the pics for examples of > ones I have made > > Bill > > From: 'Curt George' via Legacy Ornamental

Re: Cutting threads on a 2" spindle.

George' via Legacy Ornamental Mills Sent: Monday, 5 April 2021 4:38 AM To: legacy-ornamental-mills@googlegroups.com Subject: Cutting threads on a 2" spindle.   Hello Denson  I think your question should have its own thread. Its a GREAT Question, And the Answer is ?

RE: Cutting threads on a 2" spindle.

2021 9:14 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Cutting threads on a 2" spindle. So the real question here is, do you want fine thread or do you just want it to look that way?If you use a 1/2 inch pitch with a 2 start, there will be a thread every 1/4 inch. The

Re: Cutting threads on a 2" spindle.

s what I would use >>> on a 2 inch rod you would need to make custom gears.this can be done with >>> sprockets or with gears both a not a quick job. See the pics for examples >>> of ones I have made >>> >>> Bill >>> >>> From: '

Re: Cutting threads on a 2" spindle.

I would use on >> a 2 inch rod you would need to make custom gears.this can be done with >> sprockets or with gears both a not a quick job. See the pics for examples of >> ones I have made >> >> Bill >> >> From: 'Curt George' via Legacy O

Re: Cutting threads on a 2" spindle.

ril 2021 4:38 AM *To:* legacy-ornamental-mills@googlegroups.com *Subject:* Cutting threads on a 2" spindle. Hello Denson I think your question should have its own thread. Its a GREAT Question, And the Answer is ???  Its been done, but depending on what you want the answer may very. ;-)

Re: Cutting threads on a 2" spindle.

I think I will add in my own two-cents worth on how I would try it latter. As Tim Z said, Bill had done it for his nut and screw in the past.https://www.youtube.com/watch?v=G_l3gTZLkOc This is his video. C.A.G. On Sunday, April 4, 2021, 02:38:25 PM EDT, 'Curt George' via Legacy Ornamental M

Cutting threads on a 2" spindle.

Hello Denson I think your question should have its own thread.Its a GREAT Question, And the Answer is ???  Its been done, but depending on what you want the answer may very. ;-) - Hi gentlemen,Has anyone turned threads on the legacy?I want to make some 2” diameter threaded wooden rods.Than