a lot of the bigger feeler gauges are used for spark plug gaps, check
out the automotive side of the store
On 3/8/2017 5:07 PM, Jim Riggen wrote:
In some of the videos the guy is using a feeler gauge to set cut
depths. The biggest value I've seen so far is .075". Where can I get
Thank you all for your suggestions. I know that at one time legacy sold a set
but I don't know any details about it. They no longer sell it.
Bill, thank you for your drill bit suggestion. It's simple and I don't need to
buy anything. I like it.
Jim
--
You received this message because you ar
@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Hallow
Sent: Friday, 10 March 2017 12:33 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Feeler gauge
Jim
Forget feeler gauges for the large measurements. The answer is to use bar
stock. Bar
pulley from turning on
the motor shaft. A set of several sizes is available from woodworking
suppliers as set-up-blocks.Bill
On Wednesday, March 8, 2017 6:07 PM, Jim Riggen wrote:
In some of the videos the guy is using a feeler gauge to set cut depths. The
biggest value I've seen s
-Router-Table/dp/B01LZRMR9A/ref=sr_1_8?ie=UTF8&qid=1489043868&sr=8-8&keywords=Precision+Setup+Bars
Jim Riggen wrote:
> In some of the videos the guy is using a feeler gauge to set cut depths.
> The biggest value I've seen so far is .075". Where can I get a feele
: Feeler gauge
Hello Jim
If you add up the feeler's form your gauge set, you can get that .075 .
I think you are right,On my set .025 is the thickest one on the bunch. (Its
been a while since I last looked.) I will get back to you on that.
More later. (I will be back on my next
C.A.G.
- Original Message -
From: "Jim Riggen"
To: "Legacy Ornamental Mills"
Sent: Wednesday, March 8, 2017 6:07:03 PM
Subject: Feeler gauge
In some of the videos the guy is using a feeler gauge to set cut depths. The
biggest value I've seen so far is .075".
In some of the videos the guy is using a feeler gauge to set cut depths.
The biggest value I've seen so far is .075". Where can I get a feeler
gauge that will measure .075"? I've got two feeler gauges and the biggest
single blade is .025.
Jim
--
You received this mes
