Thank you - Again Tim. Have decided to add the Plunge router to the Ebay
listing instead
of lowering the price for the next 30 days. Curious as to NO watchers on my
listing yet
one of the others, higher price and less accessories has 22 watching. May
end up
taking the machine off Jim's custom
Both of those should go with the machine. Both are built by Legacy. If I
recall, one should have a 60 tooth gear and the other a pair of 30 tooth gears.
These where never meant to be taken apart. Unlike the other gears, these have
a hole in the center that has bearings in them. I hope that h
So if one of the assembled gears has 4.5 pitch would the full set - 2 -
71/2 be absent the 4 1/2 ?
Were the gears assembled from Legacy or by the buyer ?
On Fri, Aug 31, 2018 at 3:27 PM Tracy Smith wrote:
> The directional gears work for any pitch gears or Standard/Reduction
> gears. Not sure
The directional gears work for any pitch gears or Standard/Reduction
gears. Not sure if that is what you meant.
Tracy
On Fri, Aug 31, 2018 at 11:52 AM 4 Jim Carpenter
wrote:
> Question on Pitch gears. Which pitch gears are part of the Left Hand
> Spiral and the Reversing RH gear sets ? Should
Hello again Bill,
The rotary table that looks a bit different is actually the same as the
others. It just hasn't had the board attached to it. I is actually "brand
new" in the box when I got it. All the parts are still in bags. I look
forward to doing a project using it.
Tracy
On Sat, Aug 25
one mill
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills [mailto:
> legacy-ornamental-mills@googlegroups.com]
> *Sent:* Sunday, 26 August 2018 3:45 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: My LOM collection
Hi Curt,
That is exactly what I intend to do. I don't need to do a 8' or 12' posts
right away so it may be a few months but I'll put together some frame
extension that will hold the machine in fixed position and then take the
tail stock and put into a solid (yet adjustable) position on my shop wa
Ornamental Mills
[mailto:legacy-ornamental-mills@googlegroups.com]
Sent: Sunday, 26 August 2018 3:45 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: My LOM collection and small journey
Hello Tracy
First off, I would like to say thank you for posting.
Your Legacy adventure
Hello TracyFirst off, I would like to say thank you for posting.Your Legacy
adventure is pretty impressive to say the least.You have some pretty nice
Machines there ! About your quest to go longer, This too has been one of my
problems that I have run into a few times over the years.
One easy way
You certainly have a nice collection of LOMs there, I’m sure you will have no
trouble finding new homes for the ones you don’t need. Looks like one of the
rotary tables might be for the revo model it looks narrower than the others
Richard might be interested if your selling it and if he doesn’t
10 matches
Mail list logo
