Hi ppl,I have a problem with the small gears on my REVO
CRAFTMASTER,same as basic Revo just some extras,when I fit the small
gears C.D.E.G.when I turn the handle on the lead screw where these
gears fit the handle won't pass the directional gear setup e.g. left
spiral /right spiral,I have tried adj
Hi chaps, thank you for your help, I have solved this wee prob,I
removed the outer plate from the left/right. gear assembly,leaving the
inside one intact, replaced the very thin greased washer on the
bearing and added another larger greased washer to that so the screw
had some thing to tighten aga
uot;Legacy Ornamental Mills"
Sent: Monday, June 01, 2009 8:00 AM
Subject: SMALL REVO GEARS
>
> Hi ppl,I have a problem with the small gears on my REVO
> CRAFTMASTER,same as basic Revo just some extras,when I fit the small
> gears C.D.E.G.when I turn the handle on the lead screw
Hi Mac
The problem can be remedied by locating the chrome plated spacer that
fits between the handle and the gear. One side of it is a smaller
diameter than the other, you may have it on the wrong way around. If
for some reason you do not have this stepped chrome washer drop me an
email and the R