the trouble on this group I think too many shy people
Bill
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of MAX LATHAM
Sent: Monday, 26 January 2015 2:53 PM
To: legacy
Subject: RE: Stuck pieces on Mill - does this work?
You guys
Kroil is a good product. I use it in the liquid form.
Peter
-Original Message-
From: Cole Andrews coleandrew...@gmail.com
To: Legacy group legacy-ornamental-mills@googlegroups.com
Sent: Sun, Jan 25, 2015 11:47 pm
Subject: Re: Stuck pieces on Mill - does this work?
Loctite makes
When I get a MT stuck I chase it out with a bolt from the outer hole.
Then when the tension is maxed out, I use a 3/4 wrench between the
thread and the dog drive or accessory installed and give it a little
pry. On one rare occasion, with all the pressure from the bolt and
prying with the
years ago.Please just keep up the banter and the photos of
your work.max
Date: Sun, 25 Jan 2015 21:48:47 -0500
From: mwfos...@earthlink.net
To: legacy-ornamental-mills@googlegroups.com
Subject: Stuck pieces on Mill - does this work?
I came across the below link on eBay.
The headstock's drive insert
@googlegroups.com] On Behalf Of
mwfos...@earthlink.net
Sent: Monday, 26 January 2015 1:49 PM
To: LOM - Tim
Subject: Stuck pieces on Mill - does this work?
I came across the below link on eBay.
The headstock's drive insert is STUCK in the Morse taper sleeve.
I even resorted to disassembling the headstock
Use it routinely on rifle and pistol actions. Very positive results at least
none have frozen up.
Sent from my iPod
On Jan 25, 2015, at 6:48 PM, mwfos...@earthlink.net
mwfos...@earthlink.net wrote:
I came across the below link on eBay.
The headstock's drive insert is STUCK in the Morse
: Sunday, January 25, 2015 7:57 PM
Subject: RE: Stuck pieces on Mill - does this work?
We faced stuck tapers before
https://groups.google.com/forum/#!searchin/legacy-ornamental-mills/stuck$20tapers/legacy-ornamental-mills/bcnU6GwnpFg/Xq65Dq1zd2AJ
here is some from the archives
: Sunday, January 25, 2015 7:57 PM
Subject: RE: Stuck pieces on Mill - does this work?
We faced stuck tapers before
https://groups.google.com/forum/#!searchin/legacy-ornamental-mills/stuck$20tapers/legacy-ornamental-mills/bcnU6GwnpFg/Xq65Dq1zd2AJ
here is some from the archives
Bill
From
I came across the below link on eBay.The headstock's "drive insert" is STUCK in the Morse taper sleeve.I even resorted to disassembling the headstock to try to get the two pieces apart. No luck.I've tried "WD-40", "Liquid Wrench", and a couple others. I've also tried placing the piece(s) in the
