G.
>
> --
> *From: *"Richard Ellis" <rchrd@gmail.com >
> *To: *"Legacy Ornamental Mills" <legacy-orna...@googlegroups.com
> >
> *Sent: *Wednesday, January 18, 2017 6:05:40 AM
> *Subject: *Re: rotary table hand wh
Ellis" <rchrd.ell...@gmail.com>
To: "Legacy Ornamental Mills" <legacy-ornamental-mills@googlegroups.com>
Sent: Wednesday, January 18, 2017 6:05:40 AM
Subject: Re: rotary table hand wheel
Curtis
Pics of the miniature spindles
On Monday, January 9, 2017 at 5:03:51 PM
>> Richard
>>>
>>> On Monday, January 16, 2017 at 5:13:49 PM UTC, Tim wrote:
>>>>
>>>> photos please.
>>>>
>>>> - Original Message -
>>>>
>>>> *From:* Richard Ellis
>>>> *To:* L
>
> C.A.G.
>
> --
> *From: *"Richard Ellis" <rchrd@gmail.com >
> *To: *"Legacy Ornamental Mills" <legacy-orna...@googlegroups.com
> >
> *Sent: *Tuesday, January 17, 2017 12:23:17 PM
> *Subject: *Re: rotary table hand wheel
>
>
7, 2017 12:23:17 PM
Subject: Re: rotary table hand wheel
Mike
Will do, and by the way I have made those 10 small turnings using the
Duplicator that I made. It worked O.K. but a bit tiring on the eyes
Richard
On Tuesday, January 17, 2017 at 3:24:35 PM UTC, LILtwisted wrote:
Richard, Even tho
I have made
> Richard
>
> On Monday, January 16, 2017 at 5:13:49 PM UTC, Tim wrote:
>>
>> photos please.
>>
>> - Original Message -
>>
>> *From:* Richard Ellis
>> *To:* Legacy Ornamental Mills
>> *Sent:* Monday, January 16, 201
: rotary table hand wheel
Thanks Tim
Still a lot to learn!!!
However, today I drilled a 6 mm hole right through the rotary
table spindle and have a 6mm rod that goes from underneath
and when locating a blank to be routed the needle (rod) that
has a 60 deg
inal Message -
>
> *From:* Richard Ellis
> *To:* Legacy Ornamental Mills
> *Sent:* Monday, January 16, 2017 1:12 AM
> *Subject:* Re: rotary table hand wheel
>
> Thanks Tim
> Still a lot to learn!!!
> However, today I drilled a 6 mm hole right through the rotary table
>
photos please.
- Original Message -
From: Richard Ellis
To: Legacy Ornamental Mills
Sent: Monday, January 16, 2017 1:12 AM
Subject: Re: rotary table hand wheel
Thanks Tim
Still a lot to learn!!!
However, today I drilled a 6 mm hole right through the rotary table
ey
> *To:* legacy-orna...@googlegroups.com
> *Sent:* Thursday, January 12, 2017 2:49 AM
> *Subject:* RE: rotary table hand wheel
>
> I believe Tim means connecting the roatry table crank shaft to the legacys
> spindle and then using the legacys larger hand cran
That's right. Seems I'm a little out of practice explaining things.
-Tim
- Original Message -
From: Bill Bulkeley
To: legacy-ornamental-mills@googlegroups.com
Sent: Thursday, January 12, 2017 2:49 AM
Subject: RE: rotary table hand wheel
I believe Tim means connecting
ent:* Monday, January 09, 2017 10:16 PM
> *Subject:* Re: rotary table hand wheel
>
> I would say go with a 4" swing like a 8" wheel the more action in the
> rotation, the more control in the work
>
> On 1/9/2017 11:03 AM, Richard Ellis wrote:
>
> Hi All
> I
e a direct drive to the spindle and use
the external crank which is around 5" swing.
-Tim
- Original Message -
From: Okla Mike (Liltwisted)
To: legacy-ornamental-mills@googlegroups.com
Sent: Monday, January 09, 2017 10:16 PM
Subject: Re: rotary table hand wheel
I would say go with a 4" swing like a 8" wheel the more action in the
rotation, the more control in the work
On 1/9/2017 11:03 AM, Richard Ellis wrote:
Hi All
I have just finished my rotary table but was wondering, how big is
the diameter of the hand wheel. ? Mine acts a bit jerky as it is
working soon. I wish you luck.
Please send pictures when you can.
C.A.G.
- Original Message -
From: "Richard Ellis" <rchrd.ell...@gmail.com>
To: "Legacy Ornamental Mills" <legacy-ornamental-mills@googlegroups.com>
Sent: Monday, January 9, 2017 12:03:51 P
Hi All
I have just finished my rotary table but was wondering, how big is the
diameter of the hand wheel. ? Mine acts a bit jerky as it is only 3 inches
dia. Before I make a new one I thought I would ask . At the moment I am
using a 10 tooth gear driving the 160 tooth wheel
Regards
Richard
16 matches
Mail list logo