Hi,
I have been following the book using the LiveCD 6.1.3 on my Toshiba
Laptop Satellite Pro 430CDT.
I used all the sources from the live CD and I applied the following
patches from the CD:
gcc-3.4.3-linkonce-1.patch
gcc-3.4.3-no_fixincludes-1.patch
gcc-3.4.3-specs-2.patch
make bootstrap en
>I used all the sources from the live CD and I applied the following
>patches from the CD:
>gcc-3.4.3-linkonce-1.patch
>gcc-3.4.3-no_fixincludes-1.patch
>gcc-3.4.3-specs-2.patch
In the chapter 5.4 donĀ“t need any patch, and in the 5.11 you only
need aply :
gcc-3.4.3-no_fixincludes-1.patch
Henry Grefrath wrote:
Hi,
I have been following the book using the LiveCD 6.1.3 on my Toshiba
Laptop Satellite Pro 430CDT.
>
I'm not a LFS building expert but I would question whether your hardware
platform has the resources for the job. That model laptop maxes RAM at
48MB and the standar
Hi Tony,
I was hoping I could build a small system on this laptop. It has 32MB
of RAM and I setup a 75MB swap partition. The rest of the hard disk
1.2GB is mounted as /mnt/lfs.
So far I have only copied the sources onto the HD and I have build
the binutils.
Regards
Henry
At 24.10.2005 22:
Henry Grefrath wrote:
Hi Tony,
I was hoping I could build a small system on this laptop. It has 32MB of
RAM and I setup a 75MB swap partition. The rest of the hard disk 1.2GB
is mounted as /mnt/lfs.
I think you might struggle with that, I'm afraid. Building just chapter
5 on an Athlon XP 2
Matthew Burgess wrote:
Henry Grefrath wrote:
Hi Tony,
I was hoping I could build a small system on this laptop. It has 32MB
of RAM and I setup a 75MB swap partition. The rest of the hard disk
1.2GB is mounted as /mnt/lfs.
I think you might struggle with that, I'm afraid. Building just
Ok - it seems that I will have to accept that :-(.
So the approach will be to use the hint for small footprint system
and compile it on another machine manually forcing the target to be 586?
Thanks
Henry
At 25.10.2005 08:07 +0200, you wrote:
Matthew Burgess wrote:
Henry Grefrath wrote: