Re: Build Error within LibreOffice Python Module

Hi Christian, hi all, I tried with adding the path to meson to autogen.input. But that didn't fix the issue. The configuration links to the python3 entry of the system. And this links to Python 3.6. Regards, Andreas Am 15.07.25 um 13:26 schrieb Christian Lohmaier: Hi Andreas, noticed tha

Re: Build Error within LibreOffice Python Module

Hi Andreas, noticed that remark just now: On Sat, Jun 21, 2025 at 11:51 AM Andreas Mantke wrote: > > My autogen.input looks like this: > --without-system-nss > --disable-skia > CC=gcc-12 > CXX=g++-12 > --enable-python=fully-internal gcc-12 to build internal python certainly should work, gcc-12

Re: [Solved] Build Error within LibreOffice Python Module

Hi Xisco, hi all, I tried a bit more and found a solution for my local build. I installed Python 3.11 and the appropriate meson package from the 'devel:' repositories and used this within a Python virtual environment. I had to activate this virtual environment for the build of LibreOffice fro

Re: Build Error within LibreOffice Python Module

Hi Xisco, Am 21.06.25 um 15:15 schrieb Xisco Fauli: Hello Andreas, On 21/6/25 11:51, Andreas Mantke wrote: since yesterday I get a build break within the Python module of LibreOffice. I tested this again with a fresh git clone from Gerrit, but there is no difference. The build breaks again.

Re: Build Error within LibreOffice Python Module

Hi Xisco, hi all, Am 21.06.25 um 15:15 schrieb Xisco Fauli: Hello Andreas, On 21/6/25 11:51, Andreas Mantke wrote: since yesterday I get a build break within the Python module of LibreOffice. I tested this again with a fresh git clone from Gerrit, but there is no difference. The build breaks

Re: Build Error within LibreOffice Python Module

Hello Andreas, On 21/6/25 11:51, Andreas Mantke wrote: since yesterday I get a build break within the Python module of LibreOffice. I tested this again with a fresh git clone from Gerrit, but there is no difference. The build breaks again. internal python3 was recently upgraded to 3.12 in 52

Build Error within LibreOffice Python Module

Hi all, since yesterday I get a build break within the Python module of LibreOffice. I tested this again with a fresh git clone from Gerrit, but there is no difference. The build breaks again. My autogen.input looks like this: --without-system-nss --disable-skia CC=gcc-12 CXX=g++-12 --enable-

Re: Build error around CLucene with Clang 19 and --enable-pch=full

On Wed, 22 Jan 2025 at 10:00, Ilmari Lauhakangas < ilmari.lauhakan...@libreoffice.org> wrote: > In addition to the issue described in > https://gerrit.libreoffice.org/c/core/+/148946 I am also getting this > CLucene thing sometimes with Clang 19 and --enable-pch=full > > PCH is currently effective

Build error around CLucene with Clang 19 and --enable-pch=full

d by LockFactory.cpp >>> /home/user/libreoffice/workdir/GenCxxObject/UnpackedTarball/clucene/src/core/CLucene/store/LockFactory.o:(lucene::store::NoLock::NoLock()) clang++: error: linker command failed with exit code 1 (use -v to see invocation) make[1]: *** [/home/user/libreoffice/external/clucene/Library_clucene.mk:10: /home/user/libreoffice/instdir/program/libclucene.so] Error 1 make[1]: *** Waiting for unfinished jobs make: *** [Makefile:298: build] Error 2 Command exited with non-zero status 2 4137.78user 214.98system 9:49.79elapsed 738%CPU (0avgtext+0avgdata 580548maxresident)k 1892976inputs+6661136outputs (358major+77442403minor)pagefaults 0swaps

Re: Build error with CliAssemblyTarget: Error signing assembly -- Access is denied.

Hi Ilmari, Ilmari Lauhakangas schrieb am 16.12.2024 um 06:31: On 15.12.2024 21.56, Regina Henschel wrote: Hi all, I get a build error with clean build and current master, no own code. [build AL ] cli_basetypes [build AL ] cli_ure [build AL ] cli_uretypes [build AL ] cli_cppuhelper ALINK

Re: Build error with CliAssemblyTarget: Error signing assembly -- Access is denied.

On 15.12.2024 21.56, Regina Henschel wrote: Hi all, I get a build error with clean build and current master, no own code. [build AL ] cli_basetypes [build AL ] cli_ure [build AL ] cli_uretypes [build AL ] cli_cppuhelper ALINK: error AL1078: Error signing assembly -- Access is denied. ALINK

Build error with CliAssemblyTarget: Error signing assembly -- Access is denied.

Hi all, I get a build error with clean build and current master, no own code. [build AL ] cli_basetypes [build AL ] cli_ure [build AL ] cli_uretypes [build AL ] cli_cppuhelper ALINK: error AL1078: Error signing assembly -- Access is denied. ALINK: error AL1078: Error signing assembly -- Access

Re: build error - uno::RuntimeException',make[1]: *** [../gbuild/Gallery.mk:57:

Cor Nouws wrote on 10/10/24 18:31: thoughts? Was working in an older branch etc. Corrected/cleaned that etc. Running make again now. / thanks Gabriel Cor -- Cor Nouws GPD key ID: 0xB13480A6 - 591A 30A7 36A0 CE3C 3D28 A038 E49D 7365 B134 80A6 - vrijwilliger https://nl.libreoffice.org - volu

build error - uno::RuntimeException',make[1]: *** [../gbuild/Gallery.mk:57:

ibreoffice/solenv/gbuild/Gallery.mk:57: ../libreoffice/workdir/Gallery/backgrounds.done] Error 1 make: *** [Makefile:296: build] Error 2 thoughts? thanks, Cor -- Cor Nouws GPD key ID: 0xB13480A6 - 591A 30A7 36A0 CE3C 3D28 A038 E49D 7365 B134 80A6 - vrijwilliger https://nl.libreoffi

[FIXED] Re: compilerplugins build error since migration from clang 14 to clang 16

I made some cleanup (removed remnants of previous clang and llvm versions) + installed these packages: "libclang-rt-dev" and "libclang-cpp16-dev" it seems, it's this last action which helped. Sorry for the noise.

Re: build error with zxing-1.4.0

On 7/14/22 11:20, Andreas Sturmlechner wrote: Error: cui/source/dialogs/QrCodeGenDialog.cxx:30:10: fatal error: BitArray.h: No such file or directory 30 | #include | ^~~~ This, among other headers, is gone. Probably caused by the following upstream change: - "remo

build error with zxing-1.4.0

Error: cui/source/dialogs/QrCodeGenDialog.cxx:30:10: fatal error: BitArray.h: No such file or directory 30 | #include | ^~~~ This, among other headers, is gone. Probably caused by the following upstream change: - "removed all internal header files from the installed

Re: Libreoffice build error[for android]

That's great ! There is no link error when i execute the command 'make distclean' and make all dynamic files(.so) used to android.But i think i should spend more time on makefile to make it clear how does the process work. Thank you very much for your help. Michael Weghorn 于2022年3月4日周五 20:06写道：

Re: Libreoffice build error[for android]

On 04/03/2022 12.37, Michael Weghorn wrote: It's not really clear to me what "he green color option" refers to, but if that refers to the change of adding the '--no-check-certificate' option for wget, that should actually be unrelated. OK, had I enabled HTML rendering for the email, it would

Re: Libreoffice build error[for android]

On 04/03/2022 10.42, di liu wrote: Thank you for your reply. > If you have current git master without any local changes and 'make > distclean' and trying again doesn't work I just modified one file which named "Makefile.fetch" location in root dir of libreoffice,But i think this change has no

Re: Libreoffice build error[for android]

Thank you for your reply. > If you have current git master without any local changes and 'make > distclean' and trying again doesn't work I just modified one file which named "Makefile.fetch" location in root dir of libreoffice,But i think this change has nothing to do with this error below is my

Re: Libreoffice build error[for android]

Hi, On 03/03/2022 16.08, di liu wrote: the build environment is linux(centos 7) which installed in vmware (my host system is macOS) this is my autogen.input content --with-distro=LibreOfficeAndroid --with-android-sdk=/home/disco/Documents/dev_env/android_sdk --with-android-ndk=/home/disco/D

Re: Libreoffice build error[for android]

x27; > clang++: error: linker command failed with exit code 1 (use -v to see > invocation) > make[2]: *** > [/home/disco/Documents/res/libreoffice/android/obj/local/armeabi-v7a/liblo-native-code.so] > Error 1 > make[1]: *** > [/home/disco/Documents/res/libreoffice/workdir/CustomTarget/android/source/done] > Error 2 > make: *** [build] Error 2 > > Could you give me some suggestions > tsk > >

Libreoffice build error[for android]

unc' clang++: error: linker command failed with exit code 1 (use -v to see invocation) make[2]: *** [/home/disco/Documents/res/libreoffice/android/obj/local/armeabi-v7a/liblo-native-code.so] Error 1 make[1]: *** [/home/disco/Documents/res/libreoffice/workdir/CustomTarget/android/source/done] Error 2 make: *** [build] Error 2 Could you give me some suggestions tsk

Re: Build error with freebl: prtypes.h:556:38: error: size of array ‘arg’ is negative

Dear Michael, Thank you for your reply. Am 21.07.21 um 14:45 schrieb Michael Stahl: On 20/07/2021 22.48, Paul Menzel wrote: $ make […] In file included from ../../../dist/out/include/prerror.h:9,   from drbg.c:9: drbg.c: In function ‘RNG_RandomUpdate’: ../../../dist/out/inclu

Re: Build error with freebl: prtypes.h:556:38: error: size of array ‘arg’ is negative

On 20/07/2021 22.48, Paul Menzel wrote: $ make […] In file included from ../../../dist/out/include/prerror.h:9, from drbg.c:9: drbg.c: In function ‘RNG_RandomUpdate’: ../../../dist/out/include/prtypes.h:556:38: error: size of array ‘arg’ is negative   556 | extern void pr

Build error with freebl: prtypes.h:556:38: error: size of array ‘arg’ is negative

Dear LibreOffice folks, Building current master on Ubuntu 21.04 (ppc64le) fails: ``` $ gcc --version gcc (Ubuntu 10.3.0-1ubuntu1) 10.3.0 […] $ git describe --dirty libreoffice-7-2-branch-point-1293-g1738f106bd73 $ make […] In file included from ../../../dist/out/include/prerror.h:9,

Re: AVX512 build error (Re: Error on the headers we are using to build.)

On 18.05.2021 13:48, Luboš Luňák wrote: So please leave the SSE2 version in. But please note that the code must do the same in all cases; so with SSE2, please also implement Neumaier, not plain Kahan summation. Otherwise, the results would vary depending on installed HW. -- Best regards,

AVX512 build error (Re: Error on the headers we are using to build.)

On Tuesday 18 of May 2021, Dante Doménech wrote: > That file is mine: https://gerrit.libreoffice.org/c/core/+/115675 First of all, please learn to write better mails. This should have been included in the first mail, together with a better mail subject. It's hard to do anything about a mail wit

Re: First-time build error

Thanks--that did the trick. Original Message Subject: Re: First-time build error Date: 25.02.2021 22:53 From: W T To: Alan Frank Hi Alan, I'm relatively new as well and had the same problem a few weeks ago. In my case, Al.exe is part of .NET Framework 4.8 SDK. So I s

Re: First-time build error

Thanks for pointing this out. The wiki instructions have now been clarified. Ilmari On 26.2.2021 5.53, W T wrote: Hi Alan, I'm relatively new as well and had the same problem a few weeks ago. In my case, Al.exe is part of .NET Framework 4.8 SDK. So I solved the problem by going back to the Vis

Re: First-time build error

Hi Alan, I'm relatively new as well and had the same problem a few weeks ago. In my case, Al.exe is part of .NET Framework 4.8 SDK. So I solved the problem by going back to the Visual Studio Installer and modifying the installation to include .NET Framework 4.8 SDK. I chose this because it was th

Re: First-time build error

Hi, Which version of windows sdk do you have? https://opengrok.libreoffice.org/xref/core/configure.ac?r=a0c8dc42#6494 -- himajin10(Tomoyuki Kubota) ___ LibreOffice mailing list LibreOffice@lists.freedesktop.org https://lists.freedesktop.org/mailman/l

First-time build error

I am a new developer, trying to get started. Ilmari provided a bunch of resources; I installed lots of software and got to the point where I thought I was ready to build. I entered the command and options from the instructions: /cygdrive/c/sources/libo-core $ /cygdrive/c/sources/libo-core/

Re: Build error

I resolved it. It was some config issue.. On Fri, 4 Sep, 2020, 10:49 PM anshu khare, wrote: > Hi, > > Recently my college tests have been going on. So I couldn't work much on > the development. > > I had some issues with the build recently. So I removed libo-core and got > it installed again. >

Build error

Hi, Recently my college tests have been going on. So I couldn't work much on the development. I had some issues with the build recently. So I removed libo-core and got it installed again. If I run cd /cygdrive/c/build instdir/program/soffice.bin from cygwin shell, LibreOfficeDev opens up withou

[SOLVED] Re: Build error cppu/source/uno/check.cxx:138:11: error: unused class member [loplugin:unusedmember]

Indeed by cherry-picking your patch, it worked locally! Thank you Stephan! Julien -- Sent from: http://document-foundation-mail-archive.969070.n3.nabble.com/Dev-f1639786.html ___ LibreOffice mailing list LibreOffice@lists.freedesktop.org https://list

Build error cppu/source/uno/check.cxx:138:11: error: unused class member [loplugin:unusedmember]

Hello, On pc Debian x86-64 with master sources updated on a 2nd build where I don't use enable-dbgutil but I still use --enable-werror, I got these errors: /home/julien/lo/libo_perf/cppu/source/uno/check.cxx:138:11: error: unused class member [loplugin:unusedmember] Char3 chars; ~~^~~~

Re: Build error cppu/source/uno/check.cxx:138:11: error: unused class member [loplugin:unusedmember]

On 04/08/2020 16:39, julien2412 wrote: On pc Debian x86-64 with master sources updated on a 2nd build where I don't use enable-dbgutil but I still use --enable-werror, I got these errors: /home/julien/lo/libo_perf/cppu/source/uno/check.cxx:138:11: error: unused class member [loplugin:unusedmember

Re: 32-bit Linux build error: no matching function for call to 'assertEquals'

duced conflicting types for parameter 'T' ('int' vs. 'long') void assertEquals( const T& expected, ^ 1 error generated. make[1]: *** [/core/solenv/gbuild/LinkTarget.mk:306: /core/workdir/CxxObject/toolkit/qa/cppunit/EventContainer.o] Error 1 make[1]: *** Wai

32-bit Linux build error: no matching function for call to 'assertEquals'

error generated. make[1]: *** [/core/solenv/gbuild/LinkTarget.mk:306: /core/workdir/CxxObject/toolkit/qa/cppunit/EventContainer.o] Error 1 make[1]: *** Waiting for unfinished jobs make: *** [Makefile:282: build] Error 2 This looks to have begun after: https://cgit.freedesktop.org/libreoffice/cor

Build error with poppler-0.86.0

New poppler version was released yesterday, here's the related change that is likely to blame: https://gitlab.freedesktop.org/poppler/poppler/-/commit/5804f51c7cf439432082b668ba8df3b0a6048caf This is where LO (6.3.5.2) build goes wrong, LO master code looks the same: sdext/source/pdfimport/xpdfw

Re: build error in libreoffice-android

ig/build' failed > make[1]: *** > [/home/rutuja/libreoffice/workdir/ExternalProject/fontconfig/build] Error 1 > make[1]: *** Waiting for unfinished jobs > Makefile:282: recipe for target 'build' failed > make: *** [build] Error' >  I have installed libexpat

build error in libreoffice-android

d. or try to use --enable-libxml2 /home/rutuja/libreoffice/external/fontconfig/ExternalProject_fontconfig.mk:22: recipe for target '/home/rutuja/libreoffice/workdir/ExternalProject/fontconfig/build' failed make[1]: *** [/home/rutuja/libreoffice/workdir/ExternalProject/fontconfig/build]

build error in libreoffice-android

d. or try to use --enable-libxml2 /home/rutuja/libreoffice/external/fontconfig/ExternalProject_fontconfig.mk:22: recipe for target '/home/rutuja/libreoffice/workdir/ExternalProject/fontconfig/build' failed make[1]: *** [/home/rutuja/libreoffice/workdir/ExternalProject/fontconfig/build]

Re: build error : 'f__faststorefence': is not a member of 'GrGLInterface::Functions'

On 2020-02-01 15:48, Kaganski Mike wrote: On 2020-02-01 8:58, himajin10 wrote: I'm getting the following error. how should I fix this error?(and why doesn't Jenkis fail?) C:/build/workdir/UnpackedTarball/skia/src/gpu/gl/GrGLGpu.cpp(3771): error C2039: 'f__faststorefence': is not a member of

Re: build error : 'f__faststorefence': is not a member of 'GrGLInterface::Functions'

On 2020-02-01 8:58, himajin10 wrote: > I'm getting the following error. how should I fix this error?(and why > doesn't Jenkis fail?) > > C:/build/workdir/UnpackedTarball/skia/src/gpu/gl/GrGLGpu.cpp(3771): > error C2039: 'f__faststorefence': is not a member of > 'GrGLInterface::Functions' >

build error : 'f__faststorefence': is not a member of 'GrGLInterface::Functions'

Hi, I'm getting the following error. how should I fix this error?(and why doesn't Jenkis fail?) C:/build/workdir/UnpackedTarball/skia/src/gpu/gl/GrGLGpu.cpp(3771): error C2039: 'f__faststorefence': is not a member of 'GrGLInterface::Functions' C:\build\workdir\UnpackedTarball\skia\include/gp

Re: Android Build Error at ./autogen.sh

Hello, I found the last problem and works for me now. We should't use ~ while giving parameter. we should write full path of sdk and ndk. As a parameter "/home/brenda/Android/Sdk/ndk-bundle" should work for you too. --- Gülşah Köse ___ LibreOffice mail

Re: Android Build Error at ./autogen.sh

Hello, ~/home/brenda/Android/Sdk/ndk-bundle/ looks like wrong path. i think it says /home/brenda/home/brenda/Android/Sdk/ndk-bundle/ By the way If we put at "/" at the end of the parameter like says wiki, the path in the code look like ndk-bundle// so remove / at the end. However checked all of t

Re: Android Build Error at ./autogen.sh

Hi *, On Mon, Nov 12, 2018 at 4:22 PM ツ wrote: > > I'm trying to build the Android version of LibreOffice but I get the > following error when running ./autogen.sh : > > "configure: error: Unrecognized Android NDK. Missing RELEASE.TXT or > source.properties file in ~/home/brenda/Android/Sdk/ndk-bu

Android Build Error at ./autogen.sh

I'm trying to build the Android version of LibreOffice but I get the following error when running ./autogen.sh : "configure: error: Unrecognized Android NDK. Missing RELEASE.TXT or source.properties file in ~/home/brenda/Android/Sdk/ndk-bundle/. Error running configure at ./autogen.sh line 296

Re: Build error on Windows

On 10/10/2018 8:57 PM, Jan-Marek Glogowski wrote: > I did my build without specifying an SDK, so this uses the newest one on the > system (from VS 2017). > I simply removed all dependencies and added libraries, until linking didn't > fail anymore. > Mike added shlwapi in commit 095caf5c7501 ("Res

Re: Build error on Windows

Am 10.10.2018 um 11:05 schrieb Kaganski Mike: > On 10/10/2018 12:02 PM, Stephan Bergmann wrote: >> Looks like a bug in >> >> >> "Implement Windows VCL backend as plugin", which removed the shlwapi

Re: Build error on Windows

gt; On 10/10/2018 10:58 AM, Gabor Kelemen wrote: > > We are experiencing a misterious build error with current master branch > > on Windows without any code changes. > > make distclean does not help. Any idea what could be done here? > > > > [build DEP] LNK:Library

Re: Build error on Windows

On 10/10/2018 12:02 PM, Stephan Bergmann wrote: > Looks like a bug in > > > "Implement Windows VCL backend as plugin", which removed the shlwapi > dependency from vcl/Library_vcl.mk but didn't ad

Re: Build error on Windows

On 10/10/2018 09:58, Gabor Kelemen wrote: [build DEP] LNK:Library/dbmmlo.dll    Creating library D:/LibreOffice/core/workdir/LinkTarget/Library/isubsequenttest.lib and object D:/LibreOffice/core/workdir/LinkTarget/Library/isubsequenttest.exp [build LNK] Library/dbmmlo.dll [build DEP] LNK:Libr

Re: Build error on Windows

Hi Gabor, On 10/10/2018 10:58 AM, Gabor Kelemen wrote: > We are experiencing a misterious build error with current master branch > on Windows without any code changes. > make distclean does not help. Any idea what could be done here? > > [build DEP] LNK:Library/dbmmlo.dll >  

Build error on Windows

Hi all We are experiencing a misterious build error with current master branch on Windows without any code changes. make distclean does not help. Any idea what could be done here? [build DEP] LNK:Library/dbmmlo.dll Creating library D:/LibreOffice/core/workdir/LinkTarget/Library

Re: Mac build error.

On 11 March 2018 at 10:39, Jan Iversen wrote: > I work on 2 branches in parallel (iOS and master), so I use “git worktree” > in order not to have 2 clones (a lot less diskspace). > > I use the --with-referenced-git feature we have, and it works well to avoid too much clone data __

Re: Mac build error.

> The 'g' script in turn is called in 'Makefile'/'Makefile.in’. Thanks, I got my problem identified. I work on 2 branches in parallel (iOS and master), so I use “git worktree” in order not to have 2 clones (a lot less diskspace). I know I could switch branches with the help of “git stash”, but

Re: Mac build error.

Hi, at first glance, it seems like the 'g' script located at the top-level of the git repository is doing things that may be related to your error in the 'refresh_submodule_hooks()' and 'refresh_all_hooks()' functions. The 'g' script in turn is called in 'Makefile'/'Makefile.in'. Regards, Micha

Mac build error.

Hi On my Mac build I am starting to get these errors: rm: .git/hooks/README: Not a directory ln: .git/hooks/README: Not a directory rm: .git/hooks/commit-msg: Not a directory ln: .git/hooks/commit-msg: Not a directory rm: .git/hooks/post-merge: Not a directory ln: .git/hooks/post-merge: Not a dir

Re: Libreoffice Build Error

: recipe for target '/home/ekansh/libreoffice/workdir/ >ExternalProject/raptor/build' failed >13. make[1]: *** [/home/ekansh/libreoffice/workdir/ExternalProject/ >raptor/build] Error 1 > 14. make[1]:

Libreoffice Build Error

11. make[2]: *** [all-recursive] Error 1 12. /home/ekansh/libreoffice/external/redland/ExternalProject_raptor.mk: 19: recipe for target '/home/ekansh/libreoffice/workdir/ExternalProject/raptor/build' failed 13. make[1]: *** [ /home/ekansh/libreoffice/workdir/Extern

Re: Build error: 'GetMap' is a protected member of 'SwAccessibleContext'

That commit fixed the error. I just finished a successful build with Clang. Thanks Markus! -- View this message in context: http://nabble.documentfoundation.org/Build-error-GetMap-is-a-protected-member-of-SwAccessibleContext-tp4213098p4213122.html Sent from the Dev mailing list archive at

Re: Build error: 'GetMap' is a protected member of 'SwAccessibleContext'

> I'm getting the following build error > > > [CXX] sw/source/core/access/accmap.cxx > [CXX] sw/source/core/access/accnotextframe.cxx > [CXX] sw/source/core/access/accnotexthyperlink.cxx > [CXX] sw/source/core/access/accpage.cxx > [CXX] sw/source/core/access/accpara.

Build error: 'GetMap' is a protected member of 'SwAccessibleContext'

With Ubuntu 17.04 x86-64, after commit:  https://cgit.freedesktop.org/libreoffice/core/commit/sw/source/core/access/accmap.cxx?id=c99f72bebdce6d294eb47e070fa1397a98ba2087 sw: fix a11y crash on double Dispose I'm getting the following build error [CXX] sw/source/core/access/accmap.cxx [CX

Re: dbg build error on start for missing shared libraries

Michael Stahl wrote on 22-09-16 15:20: > yes you need to install that library, in fact i'm surprised that it's > not installed by default on your OS. oh wait, you said "x86" - probably > you are using x86_64 OS and don't have 32-bit libraries installed that > are needed for 32-bit LO, so you need

Re: dbg build error on start for missing shared libraries

On 19.09.2016 22:42, Cor Nouws wrote: > Hi, > > Downloaded and unpacked > http://dev-builds.libreoffice.org/daily/master/Linux-rpm_deb-x86@71-TDF-dbg/current/master_dbg~2016-09-18_23.51.47_LibreOfficeDev_5.3.0.0.alpha0_Linux_x86_archive.tar.gz > > > & /program/soffice > /home/cono/lotest/TM/Libr

dbg build error on start for missing shared libraries

Hi, Downloaded and unpacked http://dev-builds.libreoffice.org/daily/master/Linux-rpm_deb-x86@71-TDF-dbg/current/master_dbg~2016-09-18_23.51.47_LibreOfficeDev_5.3.0.0.alpha0_Linux_x86_archive.tar.gz & /program/soffice /home/cono/lotest/TM/LibreOfficeDev_5.3.0.0.alpha0_Linux_x86_archive/program/oo

Re: Build error in cui module of LibreOffice core

Just for the record: this was resolved on IRC. D. ___ LibreOffice mailing list LibreOffice@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice

Build error in cui module of LibreOffice core

I have tried several times building this module after fresh pull requests to repository. Every time it give me error " /usr/bin/ld: cannot find -leditenglo collect2: error: ld returned 1 exit status make[1]: *** [/home/asela/core/instdir/program/libcuilo.so] Error 1 make: *** [cui] Error 2 " can s

Re: Build error

On 14.03.2016 09:21, Mayank Gupta wrote: > Now I'm past that problem. Visual Studio is not my concern. The main > problem is still hanging around due to which I did all of it again and > again. When I run LO from cygwin. Start LO Impress, add few lines in > slide and then click on add animation bu

Re: Build error

Hello, It was error regarding cppunit. It is fixed now.I just had to upgrade packages.Also the following doc was a great help https://wiki.documentfoundation.org/Development/How_to_debug#Running_cppunit_tests On Mon, Mar 14, 2016 at 11:17 AM, David Tardon wrote: > Hello, > > On Sun, Mar 13, 2016

Re: Build error

Now I'm past that problem. Visual Studio is not my concern. The main problem is still hanging around due to which I did all of it again and again. When I run LO from cygwin. Start LO Impress, add few lines in slide and then click on add animation button. It freezes for a second or two and then sho

Re: Build error

Hello, On Sun, Mar 13, 2016 at 02:08:39PM +0530, krishna keshav wrote: > Hello, > I have trying to build libreoffice recently using make.However the build > terminates after giving following error http://paste.ubuntu.com/15370838/ . > I ran the commands stated on termination which resulted in noth

Build error

Hello, I have trying to build libreoffice recently using make.However the build terminates after giving following error http://paste.ubuntu.com/15370838/ . I ran the commands stated on termination which resulted in nothing. Please help with how should I proceed now.I am using ubuntu 14.04LTS. Tha

Re: Build error

The solution which is made after 'make vs2013-ide-integration' and exists in source folder. Perhaps that's because the compete build itself wasn't successful. I tried make clean, then make. Deleted source folder. Unzipped tarball again and did git checkout - f and git pull - r. Ran autogen.sh with

Re: Build error

> 2) Opening visual Studio solution does nothing. > Which solution do you mean? The one in the 'windows' subdirectory? That is not supposed to do anything interesting. It is mostly a dummy project whose only purpose is to enable *starting* an already built LibreOffice in the Visual Studio debugger

Re: Build error

I'm sorry. Actually I was talking about partial build that VS does. Problem with using LODE is that it doesn't support source as tarball. It clones the repository again. I don't have very good internet here. And I did the build via regular make in cygwin. Should I run and autogen.sh and then 'make'

Re: Build error

> On 12 Mar 2016, at 16:51, Mayank Gupta wrote: > > After changing the cygwin interface to source directory I ran: > /opt/lo/bin/make vs2013-ide-integration > As stated by the instructions on wiki 'BuildingOnWindows' document. > PS: I've set up all the directories according to the instructions

Re: Build error

After changing the cygwin interface to source directory I ran: /opt/lo/bin/make vs2013-ide-integration As stated by the instructions on wiki 'BuildingOnWindows' document. PS: I've set up all the directories according to the instructions only and not my own to avoid any confusion for myself and for

Re: Build error

> On 12 Mar 2016, at 10:16, Mayank Gupta wrote: > > Hi all, > I'm Mayank Gupta. GSoC 2016 aspirant for Libreoffice project 'Add impress > shape animations that use real physics engine'. I built Libreoffice on > Windows it was successful with errors related to different tests. So, mst_ on >

Build error

Hi all, I'm Mayank Gupta. GSoC 2016 aspirant for Libreoffice project 'Add impress shape animations that use real physics engine'. I built Libreoffice on Windows it was successful with errors related to different tests. So, mst_ on IRC told it might be because ATL hadn't been disabled properly. He

Re: [build error]build LibreOffice5.1.0.2 on windows10 x86_64

> On 9 Mar 2016, at 6:01 PM, jinjin...@cs2c.com.cn wrote: > > Hi, > I am new to LibreOffice and trying to build LibreOffice 5.1.0.2 on > Windows10 x86_64 follow wiki guide, but there is a compile error : Don’t know the cause of the problem, but it’s not a compilation error. A unit test is

Re: [build error]build LibreOffice5.1.0.2 on windows10 x86_64

> I am not sure how much testing has been done one windows 10, > I have been building on Windows 10 for long without problems like this. --tml ___ LibreOffice mailing list LibreOffice@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/

Re: [build error]build LibreOffice5.1.0.2 on windows10 x86_64

Hi Did you try to follow the instruction, from our step by step guide: https://wiki.documentfoundation.org/Development/GetInvolved (it has far less configure switches than you use) I am not sure how much testing has been done one windows 10, in your case it is not a compile error, but a unittest

[build error]build LibreOffice5.1.0.2 on windows10 x86_64

Hi, I am new to LibreOffice and trying to build LibreOffice 5.1.0.2 on Windows10 x86_64 follow wiki guide, but there is a compile error : my conifgure : ./autogen.sh --without-java --with-ant-home=/cygdrive/c/sources/apache-ant-1.9.5 --with-junit=/cygdrive/c/sources/junit-4.10

Re: Android Build error

Hi, On Wed, Feb 17, 2016 at 10:13:22AM -0700, madhu314 wrote: > I > am working on a Mac environment. The wiki page says: "We develop on Linux as the host environment." So other host operating systems may or may not work. If you're not interested in fixing the problems you hit, don't use a cust

Android Build error

/instdir_for_build/LibreOfficeDev.app/Contents/program/services.rdb', needed by `/Users/Madhu/lo/core/workdir_for_build/Executable/saxparser.run'. Stop.make[1]: *** Waiting for unfinished jobsmake: *** [build] Error 2I am working on a Mac environment. I am not able to figure out what the cause

Re: build error: makefile 244 "recipe for target 'build' failed"

Cor Nouws wrote on 27-01-16 00:26: >> If that's the case "make clean" could help. > Trying.. Will know more tomorrow. Build just finished. Indeed that helped. Merci, -- Cor Nouws GPD key ID: 0xB13480A6 - 591A 30A7 36A0 CE3C 3D28 A038 E49D 7365 B134 80A6 - vrijwilliger http://nl.libreoffice.or

Re: build error: makefile 244 "recipe for target 'build' failed"

Hi Maxim, Maxim Monastirsky wrote on 26-01-16 22:54: > Well, that shows linker issues which mention the new GCC ABI, so I > guess this might be caused by some of the objects compiled with the old > ABI. Did you update your OS recently? 15:10 to be precise. But didn't build afterwards (started o

Re: build error: makefile 244 "recipe for target 'build' failed"

Hi Cor, On Tue, 2016-01-26 at 22:20 +0100, Cor Nouws wrote: > Hi, > > See http://pastebin.com/XNGLBytm Well, that shows linker issues which mention the new GCC ABI, so I guess this might be caused by some of the objects compiled with the old ABI. Did you update your OS recently? If that's the cas

build error: makefile 244 "recipe for target 'build' failed"

Hi, See http://pastebin.com/XNGLBytm Do I see it correct that LinkTarget/Executable/cppunittester should be made available? Or - what I would prefer ATM - can I skip the need to have that (the less checks the better on my old laptop :) ) thanks, Cor -- Cor Nouws GPD key ID: 0xB13480A6 - 591A 30

Re: Build error on branch libreoffice-5-0-4

Thanks Michael, appreciate the fix! If I had a Windows machine currently I’d do a test :-) Chris > On 7 Jan 2016, at 9:55 PM, Michael Stahl wrote: > > On 04.01.2016 04:58, Chris Sherlock wrote: >> I’ve done a quick check of the cygwin documentation, and they say the >> following: >> >>"A

Re: Build error on branch libreoffice-5-0-4

On 04.01.2016 04:58, Chris Sherlock wrote: > I’ve done a quick check of the cygwin documentation, and they say the > following: > > "A few Windows tools, such as find.exe, link.exe andsort.exe, may > conflict > with the Cygwin versions make sure that you use the full path > (/usr/bin/

Re: Build error on branch libreoffice-5-0-4

Hi Jan-Marek, thank you very much for the hint, the build has now completed successfully. Jan ___ LibreOffice mailing list LibreOffice@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/libreoffice

Re: Build error on branch libreoffice-5-0-4

Hi, i cannot confirm build problems with lo 5.0.4.2 (win10/VS 2013). i followed instructions given at: https://wiki.documentfoundation.org/Development/BuildingOnWindows my cygwin PATH looks like: PATH='/usr/local/bin:/usr/bin:cygdrive/c/WINDOWS/System32/ [...] build settings: /cygdrive/d/source

Re: Build error on branch libreoffice-5-0-4

Sent from my iPad, please excuse any misspellings > On 04 Jan 2016, at 04:58, Chris Sherlock wrote: > > I’ve done a quick check of the cygwin documentation, and they say the > following: > >"A few Windows tools, such as find.exe, link.exe andsort.exe, may conflict > with the Cygwin

  1   2   3   4   5   >