Noticed a misuse of 'to' while testing my event regression under polkit ACLs, and decided to review the entire conf files for other legibility bugs.
* daemon/libvirtd.conf: Use correct grammar. * src/qemu/qemu.conf: Likewise. Signed-off-by: Eric Blake <ebl...@redhat.com> --- Pushing under the trivial rule. daemon/libvirtd.conf | 24 ++++++++++++------------ src/qemu/qemu.conf | 14 +++++++------- 2 files changed, 19 insertions(+), 19 deletions(-) diff --git a/daemon/libvirtd.conf b/daemon/libvirtd.conf index 5353927..538acae 100644 --- a/daemon/libvirtd.conf +++ b/daemon/libvirtd.conf @@ -63,7 +63,7 @@ # unique on the immediate broadcast network. # # The default is "Virtualization Host HOSTNAME", where HOSTNAME -# is subsituted for the short hostname of the machine (without domain) +# is substituted for the short hostname of the machine (without domain) # #mdns_name = "Virtualization Host Joe Demo" @@ -83,8 +83,8 @@ # Set the UNIX socket permissions for the R/O socket. This is used # for monitoring VM status only # -# Default allows any user. If setting group ownership may want to -# restrict this to: +# Default allows any user. If setting group ownership, you may want to +# restrict this too. #unix_sock_ro_perms = "0777" # Set the UNIX socket permissions for the R/W socket. This is used @@ -94,7 +94,7 @@ # the default will change to allow everyone (eg, 0777) # # If not using PolicyKit and setting group ownership for access -# control then you may want to relax this to: +# control, then you may want to relax this too. #unix_sock_rw_perms = "0770" # Set the name of the directory in which sockets will be found/created. @@ -113,7 +113,7 @@ # - sasl: use SASL infrastructure. The actual auth scheme is then # controlled from /etc/sasl2/libvirt.conf. For the TCP # socket only GSSAPI & DIGEST-MD5 mechanisms will be used. -# For non-TCP or TLS sockets, any scheme is allowed. +# For non-TCP or TLS sockets, any scheme is allowed. # # - polkit: use PolicyKit to authenticate. This is only suitable # for use on the UNIX sockets. The default policy will @@ -216,7 +216,7 @@ #tls_no_verify_certificate = 1 -# A whitelist of allowed x509 Distinguished Names +# A whitelist of allowed x509 Distinguished Names # This list may contain wildcards such as # # "C=GB,ST=London,L=London,O=Red Hat,CN=*" @@ -274,13 +274,13 @@ # The number of priority workers. If all workers from above -# pool will stuck, some calls marked as high priority +# pool are stuck, some calls marked as high priority # (notably domainDestroy) can be executed in this pool. #prio_workers = 5 # Total global limit on concurrent RPC calls. Should be # at least as large as max_workers. Beyond this, RPC requests -# will be read into memory and queued. This directly impact +# will be read into memory and queued. This directly impacts # memory usage, currently each request requires 256 KB of # memory. So by default up to 5 MB of memory is used # @@ -318,7 +318,7 @@ # 3: WARNING # 4: ERROR # -# Multiple filter can be defined in a single @filters, they just need to be +# Multiple filters can be defined in a single @filters, they just need to be # separated by spaces. # # e.g. to only get warning or errors from the remote layer and only errors @@ -340,7 +340,7 @@ # 3: WARNING # 4: ERROR # -# Multiple output can be defined, they just need to be separated by spaces. +# Multiple outputs can be defined, they just need to be separated by spaces. # e.g. to log all warnings and errors to syslog under the libvirtd ident: #log_outputs="3:syslog:libvirtd" # @@ -387,7 +387,7 @@ ################################################################### # Keepalive protocol: # This allows libvirtd to detect broken client connections or even -# dead client. A keepalive message is sent to a client after +# dead clients. A keepalive message is sent to a client after # keepalive_interval seconds of inactivity to check if the client is # still responding; keepalive_count is a maximum number of keepalive # messages that are allowed to be sent to the client without getting @@ -396,7 +396,7 @@ # keepalive_interval * (keepalive_count + 1) seconds since the last # message received from the client. If keepalive_interval is set to # -1, libvirtd will never send keepalive requests; however clients -# can still send them and the deamon will send responses. When +# can still send them and the daemon will send responses. When # keepalive_count is set to 0, connections will be automatically # closed after keepalive_interval seconds of inactivity without # sending any keepalive messages. diff --git a/src/qemu/qemu.conf b/src/qemu/qemu.conf index 17f1b10..e436084 100644 --- a/src/qemu/qemu.conf +++ b/src/qemu/qemu.conf @@ -58,7 +58,7 @@ #vnc_tls_x509_verify = 1 -# The default VNC password. Only 8 letters are significant for +# The default VNC password. Only 8 bytes are significant for # VNC passwords. This parameter is only used if the per-domain # XML config does not already provide a password. To allow # access without passwords, leave this commented out. An empty @@ -180,7 +180,7 @@ # VNC WebSocket port policies, same rules apply as with remote display # ports. VNC WebSockets use similar display <-> port mappings, with -# the exception being that ports starts from 5700 instead of 5900. +# the exception being that ports start from 5700 instead of 5900. # #remote_websocket_port_min = 5700 #remote_websocket_port_max = 65535 @@ -333,7 +333,7 @@ # disable guest hugepage backing. # # NB, within this mount point, guests will create memory backing files -# in a location of $MOUNTPOINT/libvirt/qemu +# in a location of $MOUNTPOINT/libvirt/qemu # #hugetlbfs_mount = "/dev/hugepages" @@ -421,14 +421,14 @@ # Keepalive protocol: # This allows qemu driver to detect broken connections to remote # libvirtd during peer-to-peer migration. A keepalive message is -# sent to the deamon after keepalive_interval seconds of inactivity -# to check if the deamon is still responding; keepalive_count is a +# sent to the daemon after keepalive_interval seconds of inactivity +# to check if the daemon is still responding; keepalive_count is a # maximum number of keepalive messages that are allowed to be sent -# to the deamon without getting any response before the connection +# to the daemon without getting any response before the connection # is considered broken. In other words, the connection is # automatically closed approximately after # keepalive_interval * (keepalive_count + 1) seconds since the last -# message received from the deamon. If keepalive_interval is set to +# message received from the daemon. If keepalive_interval is set to # -1, qemu driver will not send keepalive requests during # peer-to-peer migration; however, the remote libvirtd can still # send them and source libvirtd will send responses. When -- 1.8.5.3 -- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
