Hi, Thanks all for your help, I installed libvirt 0.6.0-4 and kvm 84-1 from fedora's rawhide and that solved the problem. However know I have a new problem I tried the other virtual machines and some of them just don't start, they seem to stop when the bios jumps to the disk and grub, any ideas? The only thing I can think of is to upgrade the host kernel but if I'm not wrong I have to upgrade to Fedora 9 or 10, and I would like to try something else before because I want to have everything running before leaving xen completely
> Subject: RE: [libvirt] Help with bridged networking > From: lut...@redhat.com > To: observ...@hotmail.es > Date: Fri, 27 Feb 2009 08:48:13 -0800 > > On Fri, 2009-02-27 at 00:55 +0000, Jesus Urroa wrote: > > My mistake I see the lines for the ip config commented out in the file > > and I place them again > > Anyway I remove the card from the bridge to simplify the problem a > > little, this the output of brctl show for the bridge using only xen > > (no libvirt at all) and using kvm with libvirt and running only 2 vms: > > > > worknet 8000.feffffffffff no vif1.0 > > vif4.0 > > vif5.0 > > vif6.1 > > vif7.1 > > vif8.0 > > > > worknet 8000.00ff52959073 no vnet0 > > > > vnet3 > > With the non-Xen setup, your bridge should have the same IP address as > the enslaved NIC. > > What exactly is not working ? Can VM's on the same bridge ping each > other ? > > Did you add teh following iptables rule (to forward packages from the > bridge to the outside): > > # echo "-I FORWARD -m physdev --physdev-is-bridged -j ACCEPT" > > /etc/sysconfig/iptables-forward-bridged > # lokkit > --custom-rules=ipv4:filter:/etc/sysconfig/iptables-forward-bridged > # service libvirtd reload > > Otherwise, your VM;s can't talk to the outside. > > David > > _________________________________________________________________ Anímate y disfruta con los mejores juegos de Messenger, ¡descúbrelos! http://www.vivelive.com/juegos/
-- Libvir-list mailing list Libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
