n Tue, Jul 11, 2023 at 9:48 AM Yalan Zhang wrote:
> Hi there,
>
> I have a question regarding direct type interfaces. Would someone be able
> to take a look at it?
> When I start 2 VMs on the same host with interface "direct type + bridge
> mode", just as below:
&
Hi there,
I have a question regarding direct type interfaces. Would someone be able
to take a look at it?
When I start 2 VMs on the same host with interface "direct type + bridge
mode", just as below:
The 2 VMs can connect to each other via ipv4, but can not connect to each
other via
Hi Paul,
You can set the static MAC address and VLAN in the interface section of the
VM xml.
So it will not change even when the VM shuts down and restarts.
VM interface xml:
And set the network(vf pool) with xml like below:
# cat hostnet.xml
hostdev_net
Hi,
I have a question about the virtio related options, could someone please
help to confirm?
In my understanding, the ats='on' should depend on the "iommu=on", but I'm
not sure about it.
Please check the details below.
Thank you!
Details:
1. set vm with intel iommu device, and enable iommu for
Hi Igor,
I have tried some scenarios and recorded the status in this document[1].
Could you please help to check the test result?
Is my test matrix enough? (I will test again once qemu is ready)
Thank you!
BTW, current test results for pxb:
Q35+ pcie-expander-bus - works
PC + pci-expander-bus -
cc libvirt-users for more inputs
Hi,
I'm trying to find out how to check sndbuf for a tap device, could you
please help to check it?
In kernel 2.6.18, the tap device's default sndbuf is 1MB. There is a RFE
bug[1] and patch[2] to introduce the option below in libvirt to adjust the
sndbuf.
1600
Hi Peter,
Thank you for pointing that out, I will track the issue on that bug instead.
Yalan
On Thu, Sep 8, 2022 at 3:58 PM Peter Krempa wrote:
> On Thu, Sep 08, 2022 at 15:16:56 +0800, Yalan Zhang wrote:
> > Hi Laine,
> >
> > As for the hot-unplug behavior, I have on
f unplug
Thank you!
Yalan
On Thu, Sep 14, 2017 at 12:48 AM Laine Stump wrote:
> On 09/04/2017 03:37 AM, Yalan Zhang wrote:
> > Hi guys,
> >
> > when I detach an interface from vm during boot (vm boot not finished), it
> > always fail. I'm not sure if there is an
Hi Michal,
Get it, Thank you!
On Mon, Mar 7, 2022 at 7:36 PM Michal Prívozník wrote:
> On 3/3/22 03:55, Yalan Zhang wrote:
> > Hi there,
> >
> > I have an Intel X520 network card, and I find the max supported VFs are
> > different.
> > Please check below ou
quot; says it's 63.
And the sriov_numvfs file will take precedence.
Why are the numbers different? Just a little curious.
Thank you!
---
Best Regards,
Yalan Zhang
IRC: yalzhang
Hi Jiri,
Get it! Have tried and it works well, Thank you all!
On Thu, Feb 10, 2022 at 6:14 PM Jiri Denemark wrote:
> On Thu, Feb 10, 2022 at 17:47:43 +0800, Yalan Zhang wrote:
> > Thank you! I tried /etc/motd, and it does not impact the libvirt
> connection.
> > Happy to l
; > > On Thu, Feb 10, 2022 at 09:52:52AM +0800, Yalan Zhang wrote:
> > >> Hi there,
> > >>
> > >> I have a system configured with ssh login banner like as below:
> > >> # cat ~/.bashrc
> > >> ...
> > >> echo
> > >
/share/doc/libvirt-docs/html/remote.html.
Could we have this documented for reference with all the possibilities?
Thank you!
[1]
https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/868753/comments/17
[2]
https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/868753/comments/14
---
Best Regards,
Yalan Zhang
IRC: yalzhang
Hi Michal,
Thank you for the clarification.
---
Best Regards,
Yalan Zhang
IRC: yalzhang
On Fri, Mar 26, 2021 at 8:19 PM Michal Privoznik
wrote:
> On 3/26/21 12:31 PM, Yalan Zhang wrote:
> > Hi there,
> >
> > I have a question about the Qos support stat
for hostdev interfaces
---
Best Regards,
Yalan Zhang
IRC: yalzhang
Hi,
Could anyone familiar with NetworkManager help with this?
This question has been bothering me for a long time.
Thank you very much!
---
Best Regards,
Yalan Zhang
IRC: yalzhang
On Wed, Oct 21, 2020 at 6:31 PM Yalan Zhang wrote:
> Hi,
>
> I have tried the qemu-ifup script
I see. Thank you for the detailed explanation.
---
Best Regards,
Yalan Zhang
IRC: yalzhang
On Mon, Nov 30, 2020 at 3:31 PM Peter Krempa wrote:
> On Mon, Nov 30, 2020 at 14:50:33 +0800, Yalan Zhang wrote:
> > Hi,
> >
> > I have a question about nested virtual
the L1 guest?
Thank you!
---
Best Regards,
Yalan Zhang
IRC: yalzhang
Hi,
I have filed a bug about the error messages,
https://bugzilla.redhat.com/show_bug.cgi?id=1892130
And I will track the questions on that bug, please help to update on the
bug comments about the questions.
Thank you!
---
Best Regards,
Yalan Zhang
IRC: yalzhang
On Wed, Oct 21, 2020 at 10
thernet type
interface is unmanaged.
I don't know how to update the script to fix it. Could you please help?
---
Best Regards,
Yalan Zhang
IRC: yalzhang
able to validate
doc against /usr/share/libvirt/schemas/domain.rng
Extra element devices in interleave
Element domain failed to validate content
Failed. Try again? [y,n,i,f,?]: > press 'i'
error: XML error: invalid mac address check value: 'next'. Valid values are
"generated" and "static".
Failed. Try again? [y,n,f,?]:
---
Best Regards,
Yalan Zhang
IRC: yalzhang
=off,gso=off,guest_ufo=off'.
===> for receive
> for transmit
Reference: https://bugzilla.redhat.com/show_bug.cgi?id=1387477#c4
---
Best Regards,
Yalan Zhang
IRC: yalzhang
On Sun, Dec 24, 2017 at 1:57 AM Bao Nguyen wrote:
> Hello everyone,
>
> I would like to
r physical ethernet adapter on the host that is
connected to the same network.
---
Best Regards,
Yalan Zhang
IRC: yalzhang
On Sun, Mar 22, 2020 at 6:50 AM Laine Stump wrote:
> On 3/21/20 1:08 AM, Yalan Zhang wrote:
>
> > In my understanding, the standby and primary
U cap 0x40
[7.920222] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4
counters/bank).
[7.927428] perf/amd_iommu: Detected AMD IOMMU #1 (2 banks, 4
counters/bank)
...
---
Best Regards,
Yalan Zhang
IRC: yalzhang
will still broadcast in the same
subnet, and the vm will get the packet as the standby share the same mac.
Right?
Thank you!
---
Best Regards,
Yalan Zhang
IRC: yalzhang
ens2.
---
Best Regards,
Yalan Zhang
IRC: yalzhang
On Fri, May 24, 2019 at 6:34 PM Erik Skultety wrote:
> On Thu, May 23, 2019 at 10:37:56PM +0530, Fuzail Ahmad wrote:
> > Problem Statement:
> >
> > Libvirt failed to claim Virtual Functions on hostdev networ
Broadcast --arp-op Request_Reverse --arp-ip-src 0.0.0.0
--arp-ip-dst 0.0.0.0 --arp-mac-src 52:54:0:3a:40:b7 --arp-mac-dst
52:54:0:3a:40:b7 -j ACCEPT
-j DROP
For interface set as:
---
Best Regards,
Yalan Zhang
IRC
e rhel hostdev.xml
error: Failed to attach device from hostdev.xml
error: internal error: unable to execute QEMU command 'device_add': vfio
error: :07:00.0: group 2 is not viable
---
Best Regards,
Yalan Zhang
IRC: yalzhang
Internal phone: 8
mmands
'quit' to quit
virsh #
# ping test.englab.cn
PING test.englab.cn (192.168.122.4) 56(84) bytes of data.
64 bytes from test.englab.cn (192.168.122.4): icmp_seq=1 ttl=64 time=0.235
ms
64 bytes from test.englab.cn (192.168.122.4): icmp_seq=2 ttl=64 time=0.204
ms
...
---
Best Regards,
Yalan
:36,192.168.80.7,openstack-rabbitmq-00
52:54:00:95:ca:bd,192.168.80.5,openstack-glance-00
---
Best Regards,
Yalan Zhang
IRC: yalzhang
Internal phone: 8389413
On Mon, Oct 30, 2017 at 8:26 AM, Dagmawi Biru <ad...@dbvoid.com> wrote:
> Given the following network conf
Hi Ashish,
IMO, it is yes, no way to increase tx_queue_size for direct type interface
---
Best Regards,
Yalan Zhang
IRC: yalzhang
Internal phone: 8389413
On Thu, Oct 26, 2017 at 3:38 PM, Ashish Kurian <ashish...@gmail.com> wrote:
> Hi Yalan,
>
> In the previous emai
the guest.
hostdev type interface will passthrough the physical interface or VF of the
host to guest, it will get the device's parameters for rx and tx buffer.
---
Best Regards,
Yalan Zhang
IRC: yalzhang
Internal phone: 8389413
On Thu, Oct 26, 2017 at 1:30 PM, Ashish Kurian <ashish...@gmai
for eth0:
Pre-set maximums:
RX: *512*
RX Mini: 0
RX Jumbo: 0
TX: 256
Current hardware settings:
RX: *512*
RX Mini: 0
RX Jumbo: 0
TX: 256
---
Best Regards,
Yalan Zhang
IRC: yalzhang
Internal phone: 8389413
On Thu, Oct 26, 2017 at 2:33 AM, Ashish Kurian <ashish...@gmail.com> wrote:
&g
--nofork localhost:1234)
Thank you very much and look forward for your response!
---
Best Regards,
Yalan Zhang
IRC: yalzhang
Internal phone: 8389413
___
libvirt-users mailing list
libvirt-users@redhat.com
https://www.redhat.com/mailman/listinfo/libvirt
Regards,
Yalan Zhang
IRC: yalzhang
Internal phone: 8389413
___
libvirt-users mailing list
libvirt-users@redhat.com
https://www.redhat.com/mailman/listinfo/libvirt-users
35 matches
Mail list logo