Re: Recommended Reading

> If you need a good book about system administration, Evi > Nemeth's _Unix > System Administration Handbook_ is still the best anywhere. Tom > Limoncelli and Christine Hogan's _The Practice of System and Network > Administration_ is also first rate, and Frisch's O'Reilly book > _Essential System

Re: Recommended Reading

On Fri, Dec 06, 2002 at 01:18:31PM -0500, Mark Post wrote: > Because I was one of the first people at the VM/VSE Tech Conference to take > an LPI certification exam, I was one of the people who obtained a free copy > of the O'Reilly "LPI Linux Certification in a Nutshell" book. I would > recommend

Re: Image clone

Pat, On SuSE, it's /etc/rc.config, /etc/route.conf and run ifconfig On RH, it's /etc/hosts, /etc/sysconfig/network, /etc/resolv.conf Betsie Spann VM Systems Programmer - Original Message - From: "Abruzzese, Pat" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, December 06, 2002 1:5

Re: Image clone

What Linux distro are you using, Pat? In SuSE, you need to change the IP and network statements in the rc.config file and then run the SuSEConfig utility to update all of the startup scripts. Since you have no network connectivity, you'll need to do this from the 3270 console, using an editor like

Image clone

I cloned an image, everything come up but I can't reach the network. I realize I have to change the IP address but can't find the file to change.

Recommended Reading

Because I was one of the first people at the VM/VSE Tech Conference to take an LPI certification exam, I was one of the people who obtained a free copy of the O'Reilly "LPI Linux Certification in a Nutshell" book. I would recommend it to anyone who isn't already _very_ familiar with Linux system a

Re: Ext3 oddity

It was indeed me who ran into this problem about a year ago. My solution was published in Session 9341 at the San Francisco SHARE last August. A copy of my session is on Mark Post's Linuxvm.org website at http://linuxvm.org/present/SHARE99/S9341GWa.pdf (note the amusing cover page done by m

Re: Ext3 oddity

On Fri, Dec 06, 2002 at 05:23:23AM -0500, Jan As wrote: > HI! > > I assume, before you did mount the filesystem > you had attached the device using cmd like this: > > echo "add device range=0cd2" > /proc/dasd/devices > > In this case it is wrong! > > You have to attach the device READ ONLY in this

Re: Ext3 oddity

HI! I assume, before you did mount the filesystem you had attached the device using cmd like this: echo "add device range=0cd2" > /proc/dasd/devices In this case it is wrong! You have to attach the device READ ONLY in this way: echo "add device range=0cd2(ro)" > /proc/dasd/devices check cat /p

B2H (was: Regina/rexx SOCKET)

On Thu, 5 Dec 2002 23:09:06 -0500, Ross Patterson wrote: >At 22:20 12/05/2002 -0500, Mark Post wrote: >>Would someone explain what B2H is, > >It's a translator from the BookMaster document mark-up language to >HTML. B2H can handle some other input formats, but it's raison d'etre is >BookMaster GML

[OT] IBM to Buy Rational Software for $2.1B

See: "http://www.washingtonpost.com/wp-dyn/articles/A17541-2002Dec6.html"; "ARMONK, N.Y. (Reuters) - International Business Machines Corp. said on Friday it would buy Rational Software Corp. for about $2.1 billion in cash, a deal that expands IBM's role in the market for tools companies use to

Re: Ext3 oddity

On Thu, Dec 05, 2002 at 03:24:00PM -0500, Adam Thornton wrote: > If you have a shared volume, linked read-only, to a virtual machine, > formatted with ext3, then even if you have it specified as ro in > /etc/fstab, you still get errors at boot, presumably as it tries to do > something with the jou

Re: Ext3 oddity

On Fri, Dec 06, 2002 at 01:37:23AM -0500, Adam Thornton wrote: > On Fri, Dec 06, 2002 at 12:38:55PM +0800, John Summerfield wrote: > > > Okay, use '-f' to force it to check. Just in case. It is telling you the > > dirty bit's not set and that means nobody else has it mounted rw. > > > I have seen

Tivoli Storage Manager rpm's

RH 7.2 in an LPAR. Using 4.2.0 tivoli storage manager client to connect to a 4.2.2 server on the z/OS side. The 4.2.0 client for linux s/390 is restricted to ext2 file-systems. I see now that there's a 5.1 client available, but it looks like IBM moved stuff somewhere else and I can't find what I

Jumbo frame size configuration for zebra ospf

Has anyone configured Zebra's OSPF for jumbo frames(8992) ? Regards John Gustavson Enterprise Central Software Services (ECSS) 570 Washington Street - 2nd floor New York, New York, 10080-6802 Telephone: 1-212-647-3793 Fax: 1-212-647-3321 Email: [EMAIL PRO

Re: Testing a second OSA-E card

Thank you Carlos and Mark. insmod qdio insmod qeth qeth_options=noauto,0x5200,0x5201,0x5202,portname:TEST were successful. Dave -Original Message- From: Post, Mark K [mailto:[EMAIL PROTECTED]] Sent: Thursday, December 05, 2002 10:55 AM To: [EMAIL PROTECTED] Subject: Re: [LINUX-390] T