The Mono Migration Analyzer (MoMA) is a utility that has been created to
analyze .NET code and point out specific functions and calls that are not
supported by Mono - http://www.mono-project.com/Moma . You run MoMA on a
Windows machine and point it at the ASP.NET assemblies directory. MoMA
Such weirdness! I just had a chance to add a second CPU to the VM
guest and try this again. The results are good. Though I cannot fathom
why, with 2 CPUs the 3270 side of the installation dialog properly reads
and uses the values as specified in the redhat.conf file. With a single
CPU, it
Tim,
This is a known issue and can be followed here:
https://bugzilla.redhat.com/show_bug.cgi?id=506898
Justin
On 01/27/2010 03:51 PM, Moeur Tim C wrote:
Such weirdness! I just had a chance to add a second CPU to the VM
guest and try this again. The results are good. Though I cannot
I don't have a RH login or anything, so can't view this... but very
curious bug! I was really confused when Sterling suggested defining a 2nd
CPU.
Scott
On Thu, Jan 28, 2010 at 8:35 AM, Justin Payne jpa...@redhat.com wrote:
Tim,
This is a known issue and can be followed here:
Scott,
Without saying too much until the errata is released, it was/is a kernel
issue. I will check around today and see if it will be ok for me to post
the technical comments from the bug here.
Justin
On 01/28/2010 10:39 AM, Scott Rohling wrote:
I don't have a RH login or anything, so can't
Here are the technical (not in tremendous detail I admit) notes from
bugzilla 506898:
When installing to a z/VM guest or LPAR that is configured with 1 CPU
and/or less than 2 GB storage (memory), the installer will prompt for
the network configuration, regardless of whether these parameters
On Wed Jan 27 9:10 , Mark Post mp...@novell.com sent:
On 1/27/2010 at 11:05 AM, Tom Anderson tp...@speakeasy.net wrote:
Wow. That's way too many :)
Course 64K should be enough for anybody.
Remember saying that exact phrase about memory? ;)
Off by an order of magnitude. 640K, not 64K.
On 01/27/2010 09:51 PM, Moeur Tim C wrote:
CPU, it stops and I have to enter that information manually.
It is possible that the other
strange 'logon to an SSH session to continue' requirement that both Sue
and I saw is also resolved by adding that second CPU.
When the installer starts with
Has anyone moved their multipath-bindings file under /etc or under system
root from /var/lib/multipath/bindings. Our /var is mounted as a separate
filesystem and we are also using user friendly names. Per
recommendation from IBM and Novell-Support View Content doc - the default
location of the
