Hi Listers,
Where is sshfs in SLES11 ?
The information contained in this e-mail message is intended only for the
personal and confidential use of the recipient(s) named above. This message may
be an attorney-client communication and/or work product and as such is
Thanks David,
> Sounds like a FUSE module.
Looked in all the "FUSE" packages but did not find sshfs.
The information contained in this e-mail message is intended only for the
personal and confidential use of the recipient(s) named above. This message may
be an attorney-client communication an
Thanks Christian,
For fuse, SLES11 comes with these installed:
- gvfs-fuse-1.0.2-7.9
- fuse-2.7.2-61.14
- libfuse2-2.7.2-61.14
For ssh, SLES11 comes with these installed:
- libnsssharedhelper0-1.0.6-1.6
- openssh-askpass-5.1p1-41.24
- libnsssharedhelper0-32bit-
Thanks Mark and to all that replied.
Guess I will have to build it myself.
The information contained in this e-mail message is intended only for the
personal and confidential use of the recipient(s) named above. This message may
be an attorney-client communication and/or work product and as suc
own symbol dlm_release_lockspace
.
.
etc, etc, etc
Has anyone encountered these errors and what corrective action needs to be done
to eliminate them ?
TIA
Bernie Wu
The information contained in this e-mail message is intended only for the
Thanks Mark/Mike,
Good to know that "Fatal" doesn't really mean fatal.
I'll ignore the messages.
The information contained in this e-mail message is intended only for the
personal and confidential use of the recipient(s) named above. This message may
be an attorney-client communication and/or wo
Hi Listers,
Has anyone noticed that the SLES11 " shutdown -h now" seems to take much longer
that under SLES9 or SLES10 ?
The information contained in this e-mail message is intended only for the
personal and confidential use of the recipient(s) named above. This
Hi Rich,
It's the barebones install ( ala Cookbook ). After this "md: stopping all md
devices.", you can count to about 11-12 Mississippi's ( I don't own a
stopwatch :-) before it actually comes down whereas under SLES9/SLES10 the
count is usually 1-3 Mississippi's.
The information contained
Hi List,
Can anyone tell me where I can get my hands on libglue-devel so that I can
compile snIPL.
My compile error is : glue_config.h: No such file or directory.
TIA
Bernie Wu
The information contained in this e-mail message is intended only for the
personal
6:33 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: SLES11 - error when trying to compile snipl
I don't see any reference to glue_config.h in the source code for snIPL. What
version of the source code do you have, and where did you get it from?
Mark Post
>>> Bernie Wu 03/17/10
ui-1.99.2-0.2.6
perl-XML-NamespaceSupport-1.09-1.22
I will get the 3 tarballs from linux-ha.org and see what's in there.
Bernie Wu
The information contained in this e-mail message is intended only for the
personal and confidential use of the recipient(s) named above. This message m
Hi Ursula,
A couple of questions:
1. After downloading the 3 tarballs from linux-ha.org, I'm not sure where
to un-tar them to . Currently, I put them into /tmp, but I'm sure "make"
doesn't know about /tmp.
2. I cut and pasted your email and put it into a file called patchfile and
tried to
Hi List,
When trying to compile Reusable-Cluster-Components-glue-1.0.3, the compile
process tries to go out to the net , the variable STYLESHEET_PREFIX points to
the URL http://docbook.sourceforge.net/release/xsl/current
Unfortunately, our company does not allow our VM guests access to the intern
Thanks Frank.
You're absolutely right. I've never compiled a package that requires internet
access, not that I've compiled that many. Off course, there's always the first.
In my case, the problem is compounded by the fact that none of our VM guests
are allowed on the web, and thus I have to use
o sourceforge to download stuff.
Plus installing the other rpm's as suggested by Mark Ver and Ursula's patchfile.
Once again, thanks to all.
Bernie Wu
The information contained in this e-mail message is intended only for the
personal and confidential
Hi Frank,
>What I ended up doing is recursively downgrading all content from this
site .. putting it on some local disk and then updating the docs/Makefile
to point it to where it is. I re-ran the make and all was well.
This is not necessary. All you need to do is install the docbook rpm's from
Hi Tore,
> chccwdev -e 210
> mount -a
Did you run mkinitrd & zipl after bringing the disk online and mounting it ?
The information contained in this e-mail message is intended only for the
personal and confidential use of the recipient(s) named above. This message may
be an attorney-client co
uot;.
Has anyone else encountered this ?
TIA
Bernie Wu
The information contained in this e-mail message is intended only for the
personal and confidential use of the recipient(s) named above. This message may
be an attorney-client communication and/or work prod
Thanks Rich for your reply.
I tried "root". All I got back was "Login incorrect"
The information contained in this e-mail message is intended only for the
personal and confidential use of the recipient(s) named above. This message may
be an attorney-client communication and/or work product and
Thanks Samir.
Currently, I am trying a complete re-install. If that doesn't work, I will try
the rescue method.
The information contained in this e-mail message is intended only for the
personal and confidential use of the recipient(s) named above. This message may
be an attorney-client commu
Hi Karl,
It almost looks like the disk is not-formatted.
The information contained in this e-mail message is intended only for the
personal and confidential use of the recipient(s) named above. This message may
be an attorney-client communication and/or work product and as such is
privileged
Hi Carl,
It looks like you have 2 disks, one for SP1 and one for SP1_2.
> When I go in and attempt to IPL, it works...
How do you IPL ? Like "IPL 100" . Are you pointing to the right disk ?
Check your /etc/zipl.conf. It may be pointing to the wrong disk.
The information contained in this e-mai
Hi Karl,
In your zipl.conf, both SLES_10_SP1_2 and SLES_10_SP1 use /dev/dasdc1 ? In
fact /dev/dasdc1 is used everywhere. Shouldn't they be using different disks ?
The information contained in this e-mail message is intended only for the
personal and confidential use of the recipient(s) named
Hi Karl,
One thing to look for. Check your USER DIRECT and verify whether the SP1_2 and
SP1 definitions are using the same disk.
-Original Message-
From: Linux on 390 Port [mailto:linux-...@vm.marist.edu] On Behalf Of
karlkings...@ongov.net
Sent: Tuesday, June 29, 2010 9:59 AM
To: LINUX
Listers,
My NFS guest that holds my iso's is now on an unreachable network. Luckily, I
have another guest that has the same iso's. However, when I try to change my
installation source, Yast/YAST2 hangs/freezes. All I want to do is to find
where yast stores the name of the nfs guest, edit it t
e other hand, if you can enlighten me about using "rug" I will certainly
give it a try.
TIA
Bernie Wu
The information contained in this e-mail message is intended only for the
personal and confidential use of the recipient(s) named above. This message may
be an attorney-client
Thanks Mark. It did eventually time out.
The information contained in this e-mail message is intended only for the
personal and confidential use of the recipient(s) named above. This message may
be an attorney-client communication and/or work product and as such is
privileged and confidential
Hi Listers,
Is anyone running Symantec Netbackup 7.0.1 Client on SuSE Linux 10 ? If so,
can I contact you to discuss the installation ? We are running SLES10-SP2,
SLES10-SP3 and SLES11-SP1.
TIA
Bernie Wu
The information contained in this e-mail message is
Hi Ann,
Put this in your /etc/cups/cupsd.conf :
LogLevel debug2
Printcap /etc/printcap
User lp
Group lp
RunAsUser Yes
Port 631
BrowseAllow @LOCAL
Order Deny,Allow
Allow From 127.0.0.1
Allow From 127.0.0.2
Allow From @LOCAL
AuthType BasicDigest
AuthClass Group
AuthGroupName sys
Order Deny,Allow
Hi List,
Newbie wants to know the difference between layer 2 and layer 3 vswitch ?
When to use layer 2 or the other ?
Advantages of layer 2 over layer 3 ?
TIA
Bernie Wu
The information contained in this e-mail message is intended only for the
personal and
Hi Mark,
>>From Linux:
>- Take the interface down
ifdown eth0
>- Take the interface offline
???
What command to take interface offline ?
The information contained in this e-mail message is intended only for the
personal and confidential use of t
How is it defined in USER DIRECT ?
-Original Message-
From: Linux on 390 Port [mailto:linux-...@vm.marist.edu] On Behalf Of Kok Leong
Chan
Sent: Friday, January 30, 2009 1:50 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Missing DASD cylinders. DASD corrupted?
Hi all,
I have a DASD at 0405.
Hi Listers,
We have a 2 LPARS, each hosting one VM, which in turn hosts several Linux
guests.
I would like to be able to query the number of guests on another LPAR from a
linux guest on a different LPAR. Is this possible and if so, what do I have to
do to set it up ?
TIA
Bernie Wu
Thanks to all that replied.
For now, I'll take the ssh route.
Bernie Wu
The information contained in this e-mail message is intended only for the
personal and confidential use of the recipient(s) named above. This message may
be an attorney-c
Hi Listers,
We have 2 LPARS, each hosting VM, which in turn hosts several linux guests.
>From a Linux guest, how do I determine which LPAR the guest is on ?
TIA
Bernie Wu
The information contained in this e-mail message is intended only for the
personal
st is hosted on ?
On Thursday 19 February 2009 10:09, Bernie Wu wrote:
>We have 2 LPARS, each hosting VM, which in turn hosts several linux guests.
>From a Linux guest, how do I determine which LPAR the guest is on ?
>From Linux, you can just do:
awk '/LPAR Name:/ {print $3}
Hi Richard,
When I try "vmcp q lpars" this is what I get :
No LPAR data is available
Is this indicative of a zVM install problem ?
Bernie Wu
-Original Message-
From: Linux on 390 Port [mailto:linux-...@vm.marist.edu] On Behalf Of Richard
Gasiorowski
Sent: Thursday, February 1
On 2/19/09 1:14 PM, "Scott Rohling" wrote:
> Do a HELP CPQUERY LPARS .. there are a few conditions for this command to
> work -- one is dynamic i/o turned on.
>
> Scott
>
> On Thu, Feb 19, 2009 at 12:04 PM, Bernie Wu wrote:
>
>> Hi Richard,
>> W
holds the i/o configuration token, e.g.
you do your IOCP work on z/OS.
-Original Message-
From: Linux on 390 Port [mailto:linux-...@vm.marist.edu] On Behalf Of
Bernie Wu
Sent: Thursday, February 19, 2009 2:05 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: How to determine which lpar a linux
that the PROFILE EXEC is executed to allocate the vdisks. Would it be
possible to execute another rexx exec to manipulate the linux files before
issuing the ipl ?
Any ideas ?
TIA
Bernie Wu
The information contained in this e-mail message is intended only for the
-...@vm.marist.edu] On Behalf Of Mark Perry
Sent: Thursday, March 19, 2009 10:13 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Access linux files from CMS
Bernie Wu wrote:
> We have 3 separate environments, test, dev/qa and prod. Each environment
> uses different device addresses for the n
:
http://www.sinenomine.net/products/vm/ext2free
It will do exactly what you want.read *and write* Linux files in either
EXT2 or EXT3
file systems.
Have a good one.
Bernie Wu wrote:
> Hi Listers, Is it possible to access linux files before we issue the ipl 100
> command to
> bri
system - under OpenEdition.
Bernie Wu
To
Sent by: Linux LINUX-390@VM.MARIST.EDU
on 390 Portcc
Cool. I'm certainly more familiar with bash scripting that rexx exec'ing.
-Original Message-
From: Linux on 390 Port [mailto:linux-...@vm.marist.edu] On Behalf Of Michael
MacIsaac
Sent: Thursday, March 19, 2009 11:35 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Access linux files from CMS
Hi List,
Does any know if there is a FreeNX-server rpm for the Z ?
The information contained in this e-mail message is intended only for the
personal and confidential use of the recipient(s) named above. This message may
be an attorney-client communication and/or
>From "B"
# vmcp link "A" 100 1100 mr ( assuming 100 is instance A's root disk )
# chccwdev -e 0.0.1100
# mkdir /Aroot
# lsdasd ( to determine /dev/dasd? )
# mount /dev/dasd? /Aroot
Then you can either # cd /Aroot/etc
Or
# chroot /Aroot
Hi Listers,
Has anyone encountered problems trying to communicate between guests on
different subnets ?
Our setup:
-1 LPAR
-4 VSWITCH ( vsw422, vsw431, vsw416, vsw428 )
-4 VLANS ( vlan 422, vlan 431, vlan 416, vlan 428 )
-4 subnets, each subnet mapped to a vlan
Hi List,
We are working on a HA solution and we have a need to share files/disks between
2 guests on different lpars. I know that can be done with guests on the same
lpar but is it possible across lpars ?
We are running VM 5.4 and SLES10-SP2.
I welcome any ideas and suggestions.
TIA
Bernie Wu
Oops. Sent this to the List administrator.
Thanks to all that replied.
>(presumable you are using some sort of clustering FS, which one?)
We're planning on using ocfs2 as our shared filesystem.
The information contained in this e-mail message is intended only
installation kicks off ?
We are using zVM 5.4 and trying to install SLES11.
Tia
Bernie Wu
The information contained in this e-mail message is intended only for the
personal and confidential use of the recipient(s) named above. This message may
be an attorney-client
4:50 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Questions regarding SLES11 install
>>> On 10/15/2009 at 1:46 PM, Bernie Wu wrote:
> Hi List,
> Just attempting to do my first SLES11 install and the install process keeps
> on prompting for all sorts of information even though a PARMFI
Hi List,
Under SLES10, I add "vmpoff=LOGOFF vmhalt=LOGOFF" to the ipl parameters in
/etc/zipl.conf, and run "zipl -V". This would log the guest off when I issue a
"shutdown -h now" .
Under SLES11, I do the same thing, but the guest just sits there with the
following messages:
md: stopping all
h
Smrcina
Sent: Friday, October 16, 2009 9:04 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: SLES11 question regarding zipl.conf
If you are logged on to the virtual machine, it will not log you off.
Bernie Wu wrote:
> Hi List,
> Under SLES10, I add "vmpoff=LOGOFF vmhalt=LOGOFF" to the
-Original Message-
> From: Linux on 390 Port [mailto:linux-...@vm.marist.edu] On Behalf Of
> Bernie Wu
> Sent: Friday, October 16, 2009 8:48 AM
> To: LINUX-390@VM.MARIST.EDU
> Subject: SLES11 question regarding zipl.conf
>
> Hi List,
> Under SLES10, I add "vmpoff
Hi List,
If all we have are ECKD devices, can I turn smartd off ?
The information contained in this e-mail message is intended only for the
personal and confidential use of the recipient(s) named above. This message may
be an attorney-client communication and/or
Hi List,
Has anyone managed to get CUPS to work with SLES11. Every time I access CUPS
using IE, I get a lot of "426 Upgrade required" errors and Certificate errors.
Any ideas ?
TIA
Bernie
The information contained in this e-mail message is intended only for the
Thanks David for your reply.
1. To be able to use IE or Firefox, I had to setup a VNC session, use
vncviewer, then use "w3m http://localhost:631 " and select "Allow remote
administration" and "Allow printing from the internet".
2. Then I use IE7 "http://linux11:631"; which brings me to the Welc
Hi List,
Can I turn off irq_balancer service ? Seems like it is a x86 thing ?
Along the same lines, what other services can/should I turn off ?
The information contained in this e-mail message is intended only for the
personal and confidential use of the recipi
Hi List,
In my /var/log/messages I see the following:
Oct 26 10:10:23 linux11 rchal: CPU frequency scaling is not supported by your
processor.
Oct 26 10:10:23 linux11 rchal: boot with 'CPUFREQ=no' in to avoid this warning.
Oct 26 10:10:23 linux11 rchal: Cannot load cpufreq governors - No cpufreq
Hi List,
In SLES11, I see both syslog-ng and klogd. Any reason why we need two log
daemons ? Can I disable klogd since syslog-ng is supposed to be the next best
thing with regards to logging.
The information contained in this e-mail message is intended only for
Hi List,
Has anyone managed to get the Activation Code for SLES11-HAE from the Novell
website ?
I seem to hang and at the bottom of the screen all I see is "Waiting for
ssl.google-analytics.com."
Same issue when trying to signon to
https://secure-www.novell.com/ICSLogin/?%22https://secure-w
Hi List,
When I try to bring up yast2 , I see a whole lot of errors streaming by and
eventually, the gui pops up. The last screen full looks like this:
** (y2controlcenter-gnome:7344): WARNING **: error accessing
/desktop/gnome/applications/y2cc-gnome/cc_actions_list [Failed to contact
config
e gnome in your output...
===
Marian Gasparovic
===
"The mere thought hadn't even begun to speculate about the merest
possibility of crossing my mind."
--- On Fri, 1/8/10, Bernie Wu wrote:
> From: Bernie Wu
> Subject: SLES11 - lots of err
Marian,
Don't you need the X Window System group ?
Initially, I installed the 4 groups ( your 3 + the X Window group ) and I seem
to run into some sort of problem ( I don't remember what the errors were ) and
then I went on and installed the Gnome Desktop group and the Print Server group.
I will
Marian,
But your 3 groups do not provide nice/cute little icons when you go into yast2.
If I wanted icons, I think the X window group is needed.
I think the flexibility to use icons (yast2) or ncurses (yast) should be
available.
The information contained in this e-mail message is intended only
Thanks Mark.
I do have xorg-x11-xauth installed and I do have x forwarding turned on in my
/etc/ssh/sshd_config.
So what do I have to do to bring up yast2 without exporting my display ?
TIA
Bernie
The information contained in this e-mail message is intended only for the
personal and confidentia
Thanks Mark. That's where I fell short.
> Just make sure your SSH client has X forwarding turned on.
I modified my PuTTY configuration, and now I don't have to export my display.
The information contained in this e-mail message is intended only for the
personal and confidential use of the recip
dasdb and the 2 swap files
get shifted down to dasdc and dasdd. I would have preferred the new mini-disk
to become dasdd.
Is it possible to make the dasd assignments permanent across reboots ?
TIA
Bernie Wu
The information contained in this e-mail message is
68 matches
Mail list logo