Re: Z890 IOCP for IFL

your IFL CPs. Then do a POR Reset follwed by IPLs. Note that the IFL engines are probably hidden under/as ICF on the Reset Profile. Once done, you should see what should pass as a Penguin on top of the LPAR icon. Jean-Pierre Baril Specialiste en technologies de l'information/IT Specialist Novipro

Re: z/VM LPAR Configuration Question

-Pierre Baril Specialiste en technologies de l'information/IT Specialist Novipro Inc / 2055, rue Peel, bureau 701 Montreal (Quebec) H3A 1V4 Tel: (514) 744-5353 #244, Cel: (514) 891-6848, Fax: (514) 744-3908 [EMAIL PROTECTED] / www.novipro.com Peter E. Abresch Jr. - at Pepco [EMAIL PROTECTED

Re: z/VM V5.1 Installation Question

the Software Messages icon for this partition as well. Best regards. Jean-Pierre Baril Specialiste en technologies de l'information/IT Specialist Novipro Inc / 2055, rue Peel, bureau 701 Montreal (Quebec) H3A 1V4 Tel: (514) 744-5353 #244, Cel: (514) 891-6848, Fax: (514) 744-3908 [EMAIL PROTECTED

Re: Installation

and the IPL/boot code. It is 6 byte long because volume labels either disk or tape are that size. Notice that to IPL, an address of an IPL disk or tape is required but that the Label has no direct bearing on the IPL. Jean-Pierre Baril Specialiste en technologies de l'information/IT Specialist

Re: Installation and administration

some light on these acronyms. Jean-Pierre Baril Specialiste en technologies de l'information/IT Specialist Novipro Inc / 2055, rue Peel, bureau 701 Montreal (Quebec) H3A 1V4 Tel: (514) 744-5353 #244, Cel: (514) 891-6848, Fax: (514) 744-3908 [EMAIL PROTECTED] / www.novipro.com Maneesh Menon [EMAIL

Re: Time stamps and journaling file systems

Neale, We have a local account with such a configuration. Once finding the proper driver, it was not too hard to get the FICON/FCP CHPID access the SCSI 3590 tape drives. Jean-Pierre Baril Specialiste en technologies de l'information/IT Specialist Novipro Inc / 2055, rue Peel, bureau 701

Re: Time stamps and journaling file systems

all over the country) to a single instance on z900 was rather easy. Most of the pre-reqs were already there. We only had to properly configure the FCP CHPID and the IBM 2109 Switch (Brocade) connected to several 3590s mounted in a 3494 Library. Jean-Pierre Baril Specialiste en technologies de

How to implement 3590 on FCP SCSI

, i.e. IBMtape.o. I'm tempted to stick with the OCO from Developerworks and just ignore the other module. Can anyone enlighthen me on this? Thanks very much and all my best regards. Jean-Pierre Baril Specialiste en technologies de l'information/IT Specialist Novipro Inc / 2055, rue Peel, bureau 701

Re: OT: deterse

be able to help you. Best regards. Jean-Pierre Baril Specialiste en technologies de l'information/IT Specialist Novipro Inc / 2055, rue Peel, bureau 701 Montreal (Quebec) H3A 1V4 Tel: (514) 744-5353 #244, Cel: (514) 891-6848, Fax: (514) 744-3908 [EMAIL PROTECTED] / www.novipro.com Alex Leyva

Re: HCD Definition for Linux

Hi, You do not need an OS Config for Linux. You only need to change IOCP/IOCDS as/if needed. The parmline file lists useable devices. Jean-Pierre Baril Specialiste en technologies de l'information/IT Specialist Novipro Inc / 2055, rue Peel, bureau 701 Montreal (Quebec) H3A 1V4 Tel: (514) 744

Re: HELP! Configuring OSA-E adapters in QDIO mode

Hi Dave, Has the IOCDS been updated for these new OSA adapters. I did install 7.0 followed by 7.2 on an z800 in September and had no problem with the OSA card. Good luck. Jean-Pierre Baril Specialiste en technologies de l'information/IT Specialist Novipro Inc / 2055, rue Peel, bureau 701

Re: OSA-E problem with SuSE 7.0 CD on z800

before re-trying the pings but that did not help. After we toggled off/on (on the HMC) the chpid for this port, the port became available to the linux partition. Thanks very much for your quick answer. It re-assured us that 7.0 was installable on z800. Jean-Pierre Baril Specialiste en technologies

OSA-E problem with SuSE 7.0 CD on z800

processors and their OSA-Express cards. Thanks very much and all my best regards. Jean-Pierre Baril Specialiste en technologies de l'information/IT Specialist Novipro Inc / 2055, rue Peel, bureau 701 Montreal (Quebec) H3A 1V4 Tel: (514) 744-5353 #244, Cel: (514) 891-6848, Fax: (514) 744-3908

Re: SEW - weird behavior

is started, the installation directories/files must be accessed from this Basic Mode/LPAR Kernel being the client to an appropriate FTP/NFS/SMB Server through a network adapter used by this IPLed Kernel. Hope this helps. Jean-Pierre Baril Specialiste en technologies de l'information/IT Specialist

Re: HCD LPAR DASD candidate List

for a given device. Unless it was based on OS config but as I said I can't try it now. So good luck. Jean-Pierre Baril Specialiste en technologies de l'information/IT Specialist Novipro Inc / 2055, rue Peel, bureau 701 Montreal (Quebec) H3A 1V4 Tel: (514) 744-5353 #244, Cel: (514) 891-6848, Fax: (514

Re: NFS installation

if someone could give instructions on what to do in such a case. Good luck for now; I hope I am not to late with my answer. Jean-Pierre Baril Specialiste en technologies de l'information/IT Specialist Novipro Inc / 2055, rue Peel, bureau 701 Montreal (Quebec) H3A 1V4 Tel: (514) 744-5353 #244, Cel