Hi,all
Please teach me.
I use SLES9 64bit applied SP3 for zSeries under z/VM v5.1.
After I run command "shutdown -r now", z/Linux was
shutting down normally.
But next message was displayed in 3270 screen, the system
didn't start.
=
md: stopping all md devi
Hi,all
Please teach me.
SLES9 64 bit SP3 applied running on z/VM v5.1.
The SLES9 has only one Nietwork Interface(eth0).
The eth0 is connected to VSWITCH.
Now MTU size is 1500 bytes.(ifconfig output on z/Linux)
But I want to change MTU size to 8992 bytes.
I think I should change the parameter "MTU
Hi,all
I'm building VDISK environment now.
My building process is below.
(SLES9 64bit, z/VM V5.1)
1.Chanege system config file.
(I want to use till 200MB for VDISK.)
Features ,
Enable ,/* Enable the following features */
Dynamic_I/O , /* allow Dynamic I/O */
:
VD
Hi, all
Please teach me.
Today, I logined to SLES9 64bit system running under z/VM
5.1.
After I entered userid(root), the message "FATAL: cannot
change permissions of TTY: Read-only file system" was
diplayed on screen.
And entered root's password(password), I can't copy file,
touch file and so on
Hi,all
Please teach me.
I want to use 3590 tape drive on SLES9 SP2 64bit under
z/VM 5.1.
first,I run the command 「echo 1 >
/sys/bus/ccw/devices/0.0.0583/online
」
(0583 is 3590 address.「ATTACH 583 LINUX 583」command from
MAINT on z/VM.)
but, 0583 doesn't become online.
second, I run the commands
Hi,all
My z/Linux(SLES9 64bit) is running under VM v5.2.
I want to running on high performance as possible as.
What is DCSS and NSS?
I don't know DCSS and NSS at all.
Please teach me their foundations.
Thanks,
-
K.M.
--
STOP HIV/AIDS.
Yahoo! JAPAN Redribbo
Thank you for answer!
Please teach me again.
> 'RESERVE LINUX SWAP B'
What is "B" meant?
I want to make swap area on dasdb1 and vdisk.
(I want to allocate 512MB for vdisk and dasdc1 for vdisk.)
Thank you.
-
K.M.
--
STOP HIV/AIDS.
Yahoo! JAPAN Redribbon C
Hi,all
I'm looking for the way of setting up vdisk just now.
I've read this page
http://www-128.ibm.com/developerworks/library/es-vdisklinux/#author
.
I have some questions.
1.「def vfb-512 2000 4194296」you write, 4194296 is BLK
NUMBER I think.
Is BLKSIZE 4KB?
4(KB) * 4194296 (BLKNUM) = 16.383GB?
Hi,Grega! and all!
I use bash shell.
I found /etc/bash.bashrc file.
What should I use this file for??
Please teach me.
And I want to change pronpt.(user=root)
Now displayed testlnx:/etc # , want to change to
testlnx:/etc $.
Which file should I change??
Pl's teach me, also.
Thanks,
-
K.M.
-
Hi,all
I use SLES9 on zSeries.
When I logon to SLES9 on zSeries via root user, which
profile file is read??
I can't find .bashrc file and .profile file under /root
directory.
Which file is settings output of "set" or "env" command??
Please teach me.
Thanks,
-
K.M.
--
Hi,all
I have applyed the PTFs to z/VM V5.1 yesterday.(around
EREP.)
But I don't know how to confirm that PTFs had applyed or
not.
EREP's PTFs is non-VMSES Services.(e.g. nptf.bin and
nlst.bin from WEB)
Please teach me the way of comfirmation.
Thank you.
-
K.M.
_
Thank you, all
Please teach me again.
>It's in the "initial RAM disk".
>It gets updated automagically when you 'mkinitrd'.
Can I edit this file?
Thank you.
-
K.M.
__
Save the earth
http://pr.mail.yahoo.co.jp/ondanka/
---
Hi,all
Please teach me.
I'm looking for linuxrc file(script).
But I can't find it anywhere.
Where is it?
P.S.
I don't install linuxrc package.
Shuld I install this package??
Thank you.
-
K.M.
__
Save the earth
http://pr.mail.yahoo.co.jp/ondanka/
I make the backup file on filelist screen.
COPY / USER DIRBK A command on using USER DIRECT file
line.(Please see below.)
USER DIRBK file name is backup file name.
MAINTFILELIST A0 V 169 Trunc=169 Size=6 Line=1
Col=1 Alt=0
Cmd Filename Filetype Fm Format LreclRecords
Blocks Date
Thank you for reply again.
When I make the backup file of USER DIRECT, the column
72-80 of original USER DIRECT file comes to the column
10-18 next line of backup USER DIRECT file.
So I want to delete column 72-80 of original USER DIRECT.
Please teach me again.
Thank you
-
K.M.
__
Thank you for reply.
Please teach me again.
I want to delete column 73-80 when the USER DIRECT
file.(as the backup file of USER DIRECT)
>Just type in v 1 72 on the XEDIT command line
>(or add it to your PROFILE XEDIT).
Is this command XEDIT command?
(Please tell me the name and page of manual.)
Hi, all
Please teach me.
I want to copy USER DIRECT file for backup.
But, when I edit USER DIRECT file, "USE" word is displayed
in all line.(below the USER DIRECT file)
Please teach me the way of solution.
USER DIRECT C1 F 80 Trunc=72 Size=2308 Line=0
Col=1 Alt=0
0 * * * Top of
Hi,all
Please teach me.
I run z/VM V5.1.
But when I reIPLed z/VM, HCP8083I messages were displayed
z/VM console.
What should I do??
Please teach me.
Thank you.
K.M.
__
Save the earth
http://pr.mail.yahoo.co.jp/ondanka/
--
Hi, all
Please teach me.
I run z/VM V5.1 on z990 with DS8100.
I run the FLASHCOPY command from z/VM to DS8100.
But below message is displayed z/VM console.
Please teach me the way of solution.
Command started: FLASHCOPY 100A 0 END TO 1002 0 END
HCPDEX297E An unexpected condition occurred after
Hi,all
Please teach me.
I want to confirm the APARs and PTFs already applied to
z/VM V5.1.
But I don't know the way of confirm.
Please teach me the way of confirm.
Thank you.
-
K.M.
__
Save the earth
http://pr.mail.yahoo.co.jp/ondanka/
---
Hi,all
Please teach me.
I added a new disk device(DS8100).
The address range is 1000-1F9F.
Next message is showned at z/VM V5.1 every IPL.
HCPIIO1250I Device 1000 cannot be varied online because a
time-out condition occurred.
・
・
HCPIIO1250I Device 1F9F cannot be varied online because a
time-out
Hi,all
Thank you for many replies.
I want to use shared DASD(Address:1000 VOLSER:VL1000) for
file-system.
(Not raw device for Oracle RAC)
I defined the below definition to System Config file.
USER_VOLUME_LIST VL1000
RDEVICE 1000 TYPE DASD SHARED YES.
I defined the below definition to USER DIREC
Hi,all
I'm very in troubled.
Please teach me.
I want to use shared DASD.
The DASD(ADDRESS:1000) is used by two SLES9s.
SLES9s are running on different z/VMs.
(One SLES9-A is running on z/VM-A, the other SLES9-B is
running on z/VM-B.)
Firstly, can I do above scenario?
Thank you
-
K.M.
Hi,all
(B
(BI install the file rmfpms for kernel 2.6.
(BI use SLES9 for z 64bit.
(BBut it doesn't run well.
(BI run ./rmfpms start command, the next messages displayed
(Bon the screen.
(B
(Blablinux02:/opt/rmfpms/bin # ./rmfpms start
(BStarting performance gatherer backends ...
(B./rmfpms
>So this will be a guest to guest connection? No world
(Btraffic?
(B
(BGuest z/Linux to the other Guest z/Linux on different
(BLPAR(=on different z990).
(B(Not connect to world. only for internal network.)
(B
(BThank you.
(B-
(BK.M.
(B
(B__
(BSave th
Should I change the file
(B/etc/sysconfig/network/ifcfg-qeth-bus-ccw-0.0. only?
(B
(BThe Interface connects to VSWITCH.
(BIs there the other files should I change??
(B
(BPlease teach me again.
(B
(BThank you.
(B-
(BK.M.
(B
(B__
(BSave the earth
Thank you for your answer.
(BI want to the Interface for Oracle RAC Interconnect.
(BOracle person says 'I want to use Interface as MTU=9000 or
(B8192'.
(B
(BIs it possible?
(B
(BPlease advice again.
(B
(BThank you.
(B-
(BK.M.
(B
(B__
(BSave the eart
Hi,all
(B
(BI want to use the SLES9's Interfafe(eth0 running on z/VM
(Bv5, connected to VSWITCH) as MTU=9000.
(B(The Interface is running as MTU=1500.)
(B
(BI changed the parameter from MTU=1500 to MTU=9000 in
(B/etc/sysconfig/network/ifcfg-bus-ccw-0.0. file.
(B
(BBut the NIC didn't ru
Thank you for answers.
(B
(BNtp is running on Step Mode only change /etc/ntp.conf.
(BI want to run on Slew Mode.
(B
(BI need to run "ntpd -x" command to run Slew Mode on RedHat
(BLinux on xSeries.
(B
(BPlease teach me, again.
(B
(B-
(BK.M.
(B
(B__
(
Hi,all
(B
(BNow,I use SLES9 for z.
(BI have SLES9s for NTP-Server(NTPSVR) NTP-client(NTPCLT).
(BI want to synchronize between NTPSVR and NTPCLT on Slew
(BMode.
(BBut I don't know which files should I change.
(BPlease teach me.
(B
(BThank you.
(B-
(BK.M.
(B
(B
(B___
Thank you for answers.
(B
(BPlease teach me again.
(BI use two type of OSA cards.
(BOne is OSA Express 1000base card, the other is OSA
(BExpress2(with 2port type) card.
(BI recognize both OSAs are supported large MTU.
(BIs it right?
(B
(BAnd z/VM's TCPIP is defined MTU 1500 by IPWIZARD EXE
Hi,all
(B
(BPlease teach me.
(BI want to comfirm VSWITCH's MTU size.
(BSLES9's eth0 connected to the VSWITCH is MTU 9000.
(BBut VSWITCH's MTU size isn't diplayed on screen by using
(B"Q VSWITCH DETAILS" command.
(B
(BVSWITCH don't have MTU??
(B
(BI want to use eth0 for MTU size 9000.
(B
I use SLES9 Linux for routing.
(BI want to control enable/disable YaST screen by open/close
(Bfor YaST's port on routing Linux.
(BI want to know the port YaST screen uses.
(B
(BDoes YaST use X-Server's port?
(BOr which port does Yast use.
(B
(BPlease teach me again.
(B
(BThank you.
(B---
Hi,all
(B
(BPlease teach me.
(BI want to control YaST.
(BAnd I want to know the port number YaST uses.
(B
(BPlease teach me.
(B
(BThank you.
(B-
(BK.M.
(B
(B
(B__
(BSave the earth
(Bhttp://pr.mail.yahoo.co.jp/ondanka/
(B
(B---
Hi,all
(B
(BPlease teach me.
(BI want to add FTPSERVE user on z/VM.
(BI want to get FCONX LISTING file(VM performance toolkit
(Blog) from Red Hat Linux running on xSeries via FTPSERVE on
(Bz/VM.
(B
(BExample,
(BI want to use FTPUSER for only FTP (not PERFSVM) as
(Bpossible.
(B
(BI must
Hi, all.
(B
(BPlease teach me.
(BI want to run FTPSERVE on z/VM v5.
(BWhich file do I need to change?
(BI think profile tcpip, system dtcparms files are modified.
(B
(BAre those all?
(B
(BThank you.
(B-
(BK.M.
(B
(B__
(BDo You Yahoo!?
(BUpgrade You
Thank you for answer.
(BHangcheck timer is supplied as a rpm package?
(BPlease tell me the package name.
(B
(BThank you.
(B-
(BK.M.
(B
(B
(B__
(BDo You Yahoo!?
(BUpgrade Your Life
(Bhttp://bb.yahoo.co.jp/
(B
(B---
Hi, all.
(B
(BI want to use hangcheck timer module on SLES9(SP1) for
(BzSeries 64bit.
(BBut SLES9 for zSeries doesn't have it.
(B(I couldn't find it in any CDs.)
(BWhere is hangcheck timer??
(BPlease tell me any information.
(B
(BThank you.
(B-
(BK.M
(B
(B__
Hi, all.
(B
(BI want to change character code set.(EUC$B"*(BSJIS(Shift JIS))
(BNow, I use SLES9.
(BWhich should I modify?
(B
(BPlease teach me.
(B
(BThank you.
(B-
(BK.M.
(B
(B__
(BDo You Yahoo!?
(BUpgrade Your Life
(Bhttp://bb.yahoo.co.jp/
(B
Thank you for answer.
(B
(BThis system doesn't connect to other network(=internet).
(BCan this system get GMT not using internet??
(BHMC has Japanese time now.(Is this local time?)
(B
(BPlease teach me.
(B-
(BK.M.
(B
(B__
(BDo You Yahoo!?
(BUpgrade Yo
Thank you for answering.
(B
(BI want to match z/VM' TOD and z/Linux' time.
(B(z/Linux is running under z/VM.)
(BThe time between z/VM and z/Linux is unmatch.
(BI use GMT to z/VM and z/Linux as possible.
(B
(BPlease teach me again.
(B
(BP.S.
(BI'm not familiar with TOD(include GMT and UTC)
Hi,all
(B
(BI'm in troubled.
(Bz/VM's TOD is different from z/Linux.
(Bz/VM' system config definition of TOD is below.
(B/**/
(B/*Timezone Definitions
(B */
(B/*
Hi, all
(B
(BPlease teach me.
(BI want to change HOSTNAME and Domain of z/VM V5.1.
(BI need to run IPWIZARD EXEC??
(B
(BThere are running some SLES9s on the z/VM.
(BI don't want to stop SLES9s as possible.
(B
(BThank you.
(B-
(BK.M.
(B
(B__
(BDo You
Hi, all.
(B
(BI use SLES9s(LNX-A and LNX-B) under z/VM V5 on LPAR-A.
(BI made new LPAR(LPAR-B).
(BI want to move SLES9(LNX-A) running on z/VM to LPAR-B.
(BI don't want to do new installation.
(B
(BI think moving process is below.
(B1)use DDR copy, I make LNX-C(new SLES9 but eqaul LNX-B) to
Hi,Hannes
(B
(BI want to use Oracle RAC.
(BI recognize Oracle RAC needs some LVs.
(B
(BI don't know the way of definition of raw device.
(B
(BPlease teach me the process.
(B
(BThank you.
(B
(BK.M.
(B
(B__
(BDo You Yahoo!?
(BUpgrade Your Life
(Bhtt
Hi, all
(B
(BI want to use raw device on SLES9 SP1
(Bkernel2.6.5-7.191-s390x.
(BThis kernel version is first supporting raw devices of
(BSLES9.
(BBut I don't know how to define raw device.
(BI will use 10 Logical Volumes of 1VG.
(BThese 10 LVs will be raw devices.
(BShould I define LVM fir
Hi,all
(B
(BI want to make Logical Volume using only 1 DASD.
(BThe DASD type is 3390-27type.(about 32000cyls.)
(BI will make LV via YaST.
(BThe 3390-27type DASD will have about 30LVs.
(B
(BCan I make LVs as above?
(B
(BThank you.
(B
(BK.M.
(B
(B__
(
Hi, all
(B
(BPlease teach me.
(BI use z/VM V5.1.
(BI want to change Logo Config Screen of z/VM V5.
(BI want to 3270 screen and TCP/IP connection screen.
(B
(BPlease teach me how to change the screen.
(B
(BThank you.
(B-
(BK.M.
(B
(B
(B__
(BDo You Y
Hi, all
(B
(BPlease teach me.
(BI use z/VM V5.1.
(BI want to change Logo Config Screen of z/VM V5.
(BI want to 3270 screen and TCP/IP connection screen.
(B
(BPlease teach me how to change the screen.
(B
(BThank you.
(B-
(BK.M.
(B
(B__
(BDo You Yahoo
Hi, Rob
(B
(BThank you for your answer.
(BI look for documentations about VDISK.
(BDo you know them?(or URL?)
(B
(BThank you.
(B-
(BK.M.
(B
(B
(B
(B__
(BDo You Yahoo!?
(BUpgrade Your Life
(Bhttp://bb.yahoo.co.jp/
(B
(B
Hi, all
(B
(BI want to make VDISK for SLES9.
(BI'm reffered to next URL.
(Bhttp://www.linuxvm.org/Info/HOWTOs/vdiskswp.html
(B
(BI have some questions.
(BIn above Page, next statement is written.
(B'RESERVE LINUX SWAP E6'
(B"E6" is meant numbers of 4KB page segment.
(BE6(hex) is 230(decim
Hi, Rob
(B
(BThank you for your answer.
(BI'm successful to add the new NIC.
(B
(BThank you.
(B-
(BK.M.
(B
(B__
(BDo You Yahoo!?
(BUpgrade Your Life
(Bhttp://bb.yahoo.co.jp/
(B
(B--
Hi, David
(B
(B1)
(BI added to USER DIRECT as below
(BDEDICATE 2000 2000
(BDEDICATE 2001 2001
(BDEDICATE 2002 2002
(B
(B2)
(BDevice Address 2000-200F is assigned to HiperSocket.
(BOf cause I added to definition for HiperSocket to IOCDS.
(B
(B3)
(BAnd SLES9 was rebooted.(to reload chang
Hi, all
(B
(BI want to add a new NIC for HiperSocket.
(BNow, my environment is below.
(B
(Bz890 has 2LAPRs.
(BLPAR-A has lpar linux SLES9(Linux-A).
(BLPAR-B has z/VM V5.1.
(Bz/VM has two Guest SLES9s. (Linux-B, Linux-C)
(B
(BI want to add a NIC for HiperSocket on Linux-B.
(BI tried to ad
Hi, Rob
(B
(BThank you for your answer.
(BLogical Volumes are made via YaST dialog(not command).
(BShould I run "mkinitrd" command before running "zipl"
(Bcommand?
(BI don't know the differences between mkinitrd and zipl.
(BPlease teach me above questions.
(B
(BThank you.
(B-
(BK.M.
Thank you for your answer, Rich.
(BI understood.
(BI will add "dasd=xxx-yyy" parameter and run zipl command,
(Bbefore reboot.
(B(xxx-yyy is address added to the SLES9 system as Logical
(BVolume.)
(B
(BAnd I have a question after your answer.
(BAfetr installation SLES9, where does the SLES9
Hi,all
(B
(BI'm using SLES9.
(BI want to make Logical Volume(LVM).
(BAfter I added LVM to the system, I think I must change
(B/etc/zipl.conf.
(BBut I don't know how to describe "dasd=xxx-yyy".
(BIn previous release(SLES8), zipl.conf had "dasd="
(Bparameter.
(BBut SLES9 don't have.
(BPleas
Hi, all
(B
(BI can't run FlashCopy(for 2105-750) command on z/VM V5.
(BWhen I run the command, next messages displayed on z/VM
(B3270 screen.
(B
(BI want to copy a volume(from 1085 to 100B) via FlashCopy.
(B
(B
$B!c(BMessage$B!d(B
(Bq dasd
(B
(BDASD 1000 CP OWNED 510RES 77
(B
(B
Hi,all
(B
(BI want to share a OSA-Express Port(CHPID:00, CHP type:
(BOSD Device Address:0100-013F) among the OSs running on
(BLPARs.
(BNow there are three LPARs in our zSeries.
(BNative SLES9 is running on LPAR-A.
(Bz/VM is running on LPAR-B.
(Bz/OS is running on LPAR-C.
(BLPAR-A uses Devi
Hi, all
(B
(BI'm troubled in OSA-Express PortName.
(BI use z890, it has 3LPARs.
(B1st and 2nd LPARs are for z/VMs.
(B3rd is for z/OS.
(B
(Bz/VMs aren't running yet.
(BI want to know OSA-Express PortName.
(BThe Port is defined OSD(in IOCDS), the port was used by
(Bz/OS long time ago.
(BBu
Thank you for answers.
(BPlease teach me again.
(B
(BIf I use HyperSocket, do SLES9-A and SLES9-B communicate
(Bvia z/VMs(z/VM-A, z/VM-B)?
(BOr SLES9-A and SLES9-B communicate directly?(not via
(Bz/VMs)
(B
(BThank you.
(B
(B__
(BDo You Yahoo!?
(BUpgrade Y
Hi,all
(B
(BPlease teach me.
(B2 SLES9s(SLES9-A and SLES9-B) running on z/VM V5.1(z/VM-A)
(Bin a LPAR(A).
(BThe other LPAR(LPAR(B)) has the same configration.
(B(SLES9-C and SLES9-D running on z/VM-B)
(B
(BWhat I want to do is to communicate between SLES9-A and
(BSLES9-C.
(BShould I use G
We run SLES 8 on a LPAR.
(BOn another LPAR z/OS V1R5 is running.
(BWe want to copy SLES8 volumes using DFSMSdss in z/OS.
(BPlease show sample jobs, you have.
(B
(BThanks,
(B-
(BKEISHI
(B
(B
(B__
(BDo You Yahoo!?
(BUpgrade Your Life
(Bhttp://bb.yahoo.
63 matches
Mail list logo