On Saturday, 08/26/2006 at 07:41 EST, Harold Grovesteen
[EMAIL PROTECTED] wrote:
Gratuitous ARP's are usually used to allow the registration of a MAC
address into a Layer-2 switch's forwarding data base. In essence, the
gratuitous ARP lets the device tell the switch what physical port to use
Gratuitous ARP's are usually used to allow the registration of a MAC
address into a Layer-2 switch's forwarding data base. In essence, the
gratuitous ARP lets the device tell the switch what physical port to use
to send a frame when the MAC address is encountered as the destination
MAC address
:18 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: DHCP over VSWITCH?
On Thursday, 08/24/2006 at 01:33 MST, Stricklin, Raymond J
[EMAIL PROTECTED] wrote:
I am trying to set up DHCP for linux users on our VSWITCH.
Right now I have two linux users, both on VSWITCH. One is the DHCP
server (SLES9
You don't mention what release of VM your on (at least I don't see it).
I believe there may have been some VM service at one point that dealt
with Linux DHCP servers running under VM. You may want to query IBMLink
(or the support center).
Stricklin, Raymond J wrote:
For the benefit of the
Please, see the Apar VM63608 from IBM.
Good luck.
_
Clóvis Pereira
IBM Brasil
Global Technology Services/SW Services
HCPSWU2833E Error 'E00A'X adding IP address 192.54.6.16 for VSWITCH
SYSTEM VLINUX1.
HCPSWU2833E IP address is already in use on the LAN.
On Friday, 08/25/2006 at 12:48 MST, Stricklin, Raymond J
[EMAIL PROTECTED] wrote:
For the benefit of the rest of the list;
Alan's suggestion to enable faked frame headers solved the problem I was
having.
Unfortunately, a second problem surfaced immediately. The VSWITCH would
give me an
I am trying to set up DHCP for linux users on our VSWITCH.
Right now I have two linux users, both on VSWITCH. One is the DHCP
server (SLES9 SP2 with ISC dhcpd), and one is the DHCP client (SLES10
with dhcpcd).
The client sends its VM user name as its DHCP client identifier; the
server
On Thursday, 08/24/2006 at 01:33 MST, Stricklin, Raymond J
[EMAIL PROTECTED] wrote:
I am trying to set up DHCP for linux users on our VSWITCH.
Right now I have two linux users, both on VSWITCH. One is the DHCP
server (SLES9 SP2 with ISC dhcpd), and one is the DHCP client (SLES10
with