Dan,
I gave up on FEDORA17 and gave FEDORA18 a try... Much nicer interface!
I finally got F18 to install but had the following problems.
My installation choices required 1.15G DASD I dedicated a 3390-3 disk
(about 2.4G) but the installer said it wasn't enough, the old filesystem
had to be removed.
<><><><><>
signature.asc
Description: OpenPGP digital signature
Could be you've already checked - but you may need to specify the directory
of the command.. (/bin/tar) since you may not have any path set at the
point you're at?
Scott Rohling
On Wed, Dec 12, 2012 at 7:04 AM, Tom Huegel wrote:
> What a bummer, 'tar' doesn't seem to be in the 'BASIC' installe
What a bummer, 'tar' doesn't seem to be in the 'BASIC' installed package.
On Tue, Dec 11, 2012 at 12:53 PM, Rob van der Heij wrote:
> On 11 December 2012 21:41, Tom Huegel wrote:
>
> > Thanks Rick. now I just need to learn about rsync.
>
> And install it, and not make a mistake that wipes ou
On 11 December 2012 21:41, Tom Huegel wrote:
> Thanks Rick. now I just need to learn about rsync.
And install it, and not make a mistake that wipes out your source and
make sure you exclude the path where you mount the target. Been
there... ;-)You can do the same with "tar" and it has a
Thanks Rick. now I just need to learn about rsync.
On Tue, Dec 11, 2012 at 9:36 AM, Rick Troth wrote:
> At this point, you can replicate from VDISK to ECKD. 'rsync' makes this
> relatively easy. There are a few things to look out for and some fix-up
> once copied.
>
>
> On Dec 11, 2012 11:44
At this point, you can replicate from VDISK to ECKD. 'rsync' makes this
relatively easy. There are a few things to look out for and some fix-up
once copied.
On Dec 11, 2012 11:44 AM, "Tom Huegel" wrote:
> Success !! Sort of.
> I tried many many different things i.e. using different DASD 3390 mo
Success !! Sort of.
I tried many many different things i.e. using different DASD 3390 mod 3 and
mod 9 and different install options etc. so finally I tried FBA .. I don't
have any FBA DASD so I defined a 2G V-DISK and the install worked. Now I am
OK as long as the FEDORA machine is never logged off
Fedora 18 ends like this:
[ [1;32m OK [0m] Reached target Basic System.
dracut-initqueue[494]: Warning: Could not boot.
dracut-initqueue[494]: RTNETLINK answers: File exists
[ [1;32m OK [0m] Started Show Plymouth Boot Screen.
[ [1;32m OK [0m] Reached target Basic System.
dracut-initqueue[
If I try to go further I eventually get this message and the installation
aborts.
/usr/sbin/build-locale-archive: cannot add to locale archive: Read-only
file system
Traceback (most recent call
last):
File "/usr/lib64/python2.7/site-packages/pyanaconda/yuminstall.py", line
181, in callback
IO
LXFMT works on both ECKD and emulated 9336es. It does not work on pure FCP.
I'll get that page fixed.
On Dec 10, 2012, at 3:19 PM, "Michael MacIsaac" wrote:
> Tom,
>
> Wait, on ww.sinenomine.net/products/vm/lxfmt I see:
>
> This package contains a CMS utility to format and/or partition FBA
My dasd is ECKD.
On Mon, Dec 10, 2012 at 12:22 PM, David Boyes wrote:
> LXFMT works on both ECKD and emulated 9336es. It does not work on pure FCP.
>
> I'll get that page fixed.
>
>
>
> On Dec 10, 2012, at 3:19 PM, "Michael MacIsaac"
> wrote:
>
> > Tom,
> >
> > Wait, on ww.sinenomine.net/produc
Tom,
> I use lxfmt to format the disk before starting the install.. That
doesn't
> eliminate the error.
OK, like I said - "a shot in the dark"...
"Mike MacIsaac"
--
For LINUX-390 subscribe / signoff / archive access instruction
Tom,
Wait, on ww.sinenomine.net/products/vm/lxfmt I see:
This package contains a CMS utility to format and/or partition FBA disks
for Linux use.
Are these SCSI/FBA or ECKD disks?
"Mike MacIsaac"
--
For LINUX-390 subscribe / s
>>> On 12/10/2012 at 11:29 AM, Rick Troth wrote:
> If you already have other zLinux installed, I would go so far as to
> pre-format the F17 disks with that system and then run the F17
> installation.
There's aways the choice to use LXFMT from Sine Nomine Associates:
LXFMT 2.2 - CMS-Based Linux D
I use lxfmt to format the disk before starting the install.. That doesn't
eliminate the error.
On Mon, Dec 10, 2012 at 10:41 AM, Mark Post wrote:
> >>> On 12/10/2012 at 11:29 AM, Rick Troth wrote:
> > If you already have other zLinux installed, I would go so far as to
> > pre-format the F17 dis
<><><><><>
signature.asc
Description: OpenPGP digital signature
Michael MacIsaac píše v Po 10. 12. 2012 v 11:22 -0500:
> Tom,
>
> > I always get this error when it tries to write the configuration changes
> to
> > disk.
> >
> > Entering
> > debugger...
> >
> /usr/lib64/python2.7/site-packages/pyanaconda/storage/devices.py(796)create()
>
> This sounds familia
Tom,
> I always get this error when it tries to write the configuration changes
to
> disk.
>
> Entering
> debugger...
>
/usr/lib64/python2.7/site-packages/pyanaconda/storage/devices.py(796)create()
This sounds familiar. There's an issue (aka bug :)) documented on p. 115
of "The Virtualization Co
Tom Huegel píše v Po 10. 12. 2012 v 07:35 -0800:
> I always get this error when it tries to write the configuration changes to
> disk.
>
> Entering
> debugger...
> >
> /usr/lib64/python2.7/site-packages/pyanaconda/storage/devices.py(796)create()
>
> -> raise DeviceCreateError(str(e), self.name)
I always get this error when it tries to write the configuration changes to
disk.
Entering
debugger...
>
/usr/lib64/python2.7/site-packages/pyanaconda/storage/devices.py(796)create()
-> raise DeviceCreateError(str(e), self.name)
(Pdb)
On Mon, Dec 10, 2012 at 7:27 AM, Tom Huegel wrote:
> N
No. I just followed the directions to open a VNC connection.
On Mon, Dec 10, 2012 at 7:09 AM, Michael MacIsaac wrote:
> > raise DeviceCreateError(str(e), self.name)
> ...
> > Interesting. I have been trying for 2-3 weeks and still can't get
> through
> the install.
>
> Just a shot in the dark: di
> raise DeviceCreateError(str(e), self.name)
...
> Interesting. I have been trying for 2-3 weeks and still can't get
through
the install.
Just a shot in the dark: did you try opening a root shell before kicking
off the installer and dasdfmting all disks?
"Mike MacIsaac"
Interesting. I have been trying for 2-3 weeks and still can't get through
the install.
On Mon, Dec 10, 2012 at 12:34 AM, MANIK BAJPAI
wrote:
> I have.
>
>
> On 12/9/2012 6:28 AM, Neale Ferguson wrote:
>
>> We have.
>>
>> On 08/12/2012, at 19:50, "Tom Huegel" wrote:
>>
>> Has anyone successfully
I have.
On 12/9/2012 6:28 AM, Neale Ferguson wrote:
We have.
On 08/12/2012, at 19:50, "Tom Huegel" wrote:
Has anyone successfully installed Fedora 17 on z (not Hercules) ?
--
For LINUX-390 subscribe / signoff / archive acce
We have.
On 08/12/2012, at 19:50, "Tom Huegel" wrote:
> Has anyone successfully installed Fedora 17 on z (not Hercules) ?
>
> --
> For LINUX-390 subscribe / signoff / archive access instructions,
> send email to lists...@vm.ma
Has anyone successfully installed Fedora 17 on z (not Hercules) ?
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist
27 matches
Mail list logo
