Re: no lcs capable cards found (again)

Solutions Eric, Have you tried specifying noauto;lcs0,0x980,0x981,0,0 in /etc/chandev.conf? Mark Post -Original Message- From: Fernald, Eric [mailto:[EMAIL PROTECTED]] Sent: Wednesday, December 04, 2002 2:09 PM To: [EMAIL PROTECTED] Subject: no lcs capable cards found (again) I am

no lcs capable cards found (again)

I am installing a new Linux LPar using redhat 7.2 Enigma with 2.4.9-38 kernel. The system successfully IPL's but I cannot load the lcs driver. After the IPL I try to activate eth0 and I see message no lcs capable cards found. When I try insmod lcs or insmod -f /lib/modules./lcs I receive

Re: no lcs capable cards found (again)

Eric, Have you tried specifying noauto;lcs0,0x980,0x981,0,0 in /etc/chandev.conf? Mark Post -Original Message- From: Fernald, Eric [mailto:[EMAIL PROTECTED]] Sent: Wednesday, December 04, 2002 2:09 PM To: [EMAIL PROTECTED] Subject: no lcs capable cards found (again) I am installing

no lcs capable cards found

I am installing a new linux lpar using redhat 7.2 Enigma with 2.4.9-38 kernel. The system successfully IPL's but I cannot load the lcs driver. After the IPL I try to activate eth0 and I see message no lcs capable cards found. When I try insmod lcs or insmod -f /lib/modules./lcs I

Re: OSA-2 FENET No lcs capable cards found

Hi, this is native mode. But today we will also try LPAR mode. -Original Message- From: Rich Smrcina [mailto:[EMAIL PROTECTED]] Sent: Friday, June 28, 2002 9:13 AM To: [EMAIL PROTECTED] Subject: Re: OSA-2 FENET No lcs capable cards found Is this in an LPAR or under VM? If under VM

Re: OSA-2 FENET No lcs capable cards found

28.06.2002 10:52:05 Adem Arslan (Garanti Teknoloji) wrote: Hi, this is native mode. But today we will also try LPAR mode. Try to add to parmfile ipldelay=1m. It may help, if you OSA card can not start so fast as linux can. WBR, Sergey

Re: OSA-2 FENET No lcs capable cards found

12:11 PM To: [EMAIL PROTECTED] Subject: Re: OSA-2 FENET No lcs capable cards found 28.06.2002 10:52:05 Adem Arslan (Garanti Teknoloji) wrote: Hi, this is native mode. But today we will also try LPAR mode. Try to add to parmfile ipldelay=1m. It may help, if you OSA card can not start so fast

Re: OSA-2 FENET No lcs capable cards found

not initialize and system give this error messages as follows : No lcs capable cards found. any hints and helps appreciated. Thanks in advance, Adem -- Rich Smrcina Sytek Services, Inc. Milwaukee, WI [EMAIL PROTECTED] [EMAIL PROTECTED] Catch the WAVV! Stay for Requirements and the Free