> On Dec 11, 2015, at 3:46 PM, Andy Gross wrote:
>
> From: Andy Gross
>
> This patch changes the email address for Andy Gross and David Brown and drops
> Kumar Gala. In addition, it changes the location of the repository.
>
> Signed-off-by: Andy Gross
>
> On Jun 1, 2015, at 1:35 PM, Arnd Bergmann wrote:
>
> On Friday 29 May 2015 14:42:01 Arnd Bergmann wrote:
>> On Thursday 28 May 2015 10:55:39 Kumar Gala wrote:
>>> Qualcomm ARM Based SoC Updates for v4.2-1
>>>
>>> * Added Subsystem Power Manager (S
Add an implementation of the SCM interface that works on ARM64 SoCs. This
is used by things like determine if we have HDCP support or not on the
system.
Signed-off-by: Kumar Gala
---
* v6:
- Added comment about HDCP usage
- Folded in HDCP SCM call
- implement boot interfaces as -EINVAL
* v5
Subsystem Power Manager (SPM) driver
* Split out 32-bit specific SCM code
* Added HDCP SCM call
Kumar Gala (1):
firmware: qcom: scm: Split out 32-bit specific SCM code
Lina Iyer (1):
ARM: qcom: Add Subsystem Power Manager (SPM
SCM code
Kumar Gala (1):
firmware: qcom: scm: Split out 32-bit specific SCM code
Lina Iyer (1):
ARM: qcom: Add Subsystem Power Manager (SPM) driver
drivers/firmware/Makefile | 3 +-
drivers/firmware/qcom_scm-32
The following changes since commit b787f68c36d49bb1d9236f403813641efa74a031:
Linux 4.1-rc1 (2015-04-26 17:59:10 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git
tags/qcom-defconfig-for-4.2
for you to fetch changes up to e3db
The following changes since commit b787f68c36d49bb1d9236f403813641efa74a031:
Linux 4.1-rc1 (2015-04-26 17:59:10 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git
tags/qcom-arm64-for-4.2
for you to fetch changes up to a190a1ce
The following changes since commit b787f68c36d49bb1d9236f403813641efa74a031:
Linux 4.1-rc1 (2015-04-26 17:59:10 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git
tags/qcom-dt-for-4.2
for you to fetch changes up to b73b31577f7
> On May 11, 2015, at 2:21 PM, Mathieu Poirier
> wrote:
>
> On 11 May 2015 at 02:31, Ivan T. Ivanov wrote:
>> Add initial set of CoreSight components found on Qualcomm's 8x16 chipset.
>>
>> Signed-off-by: Ivan T. Ivanov
>> ---
>>
>> Changes since v2 [1]:
>> * Added "1x" to "qcom,coresight-r
> On Apr 9, 2015, at 2:20 PM, Lina Iyer wrote:
>
> Hi,
>
> This patchset adds acks and reviewed-by tags to the SPM driver and updates the
> defconfig files to enable cpuidle support on the v18 rev of the patchset [1].
>
> The dependencies for these changes are
> - SCM and device tree changes f
Split out the 32-bit SCM implementation into its own file to prep for
supporting a 64-bit/ARM64 implementation as well. We create a simple shim
to ensure both versions conform to the same interface.
Signed-off-by: Kumar Gala
---
v5:
Split out error defines in common qcom_scm.h
drivers
Add an implementation of the SCM interface that works on ARM64/64-bit SoCs
Signed-off-by: Kumar Gala
Signed-off-by: Lina Iyer
---
* v5:
- use common error defines from qcom_scm.h
- removed R*_STR defines
* v4:
- Folded in change to qcom_scm_cpu_power_down to remove HOTPLUG flag
from Lina
> On Apr 28, 2015, at 8:11 AM, Christopher Covington
> wrote:
>
> Hi Kumar,
>
> On 04/27/2015 05:23 PM, Kumar Gala wrote:
>
>> --- /dev/null
>> +++ b/drivers/firmware/qcom_scm-64.c
>> @@ -0,0 +1,465 @@
>> +/* Copyright (c) 2014-20
Add an implementation of the SCM interface that works on ARM64/64-bit SoCs
Signed-off-by: Kumar Gala
Signed-off-by: Lina Iyer
---
* v4:
- Folded in change to qcom_scm_cpu_power_down to remove HOTPLUG flag
from Lina.
arch/arm64/Kconfig | 1 +
drivers/firmware/Makefile
Split out the 32-bit SCM implementation into its own file to prep for
supporting a 64-bit/ARM64 implementation as well. We create a simple shim
to ensure both versions conform to the same interface.
Signed-off-by: Kumar Gala
---
drivers/firmware/Makefile | 3 +-
drivers
> On Apr 9, 2015, at 3:21 AM, Srinivas Kandagatla
> wrote:
>
> Hi Kumar,
>
> Now that the rpm redesign dependency is resolved, If its not too late could
> you
> queue these dt patches for v4.1 or v4.1-rc1.
>
> I tested these patches on APQ8064 based IFC6410 board with SATA/USB/HDMI.
>
> I
> On Apr 20, 2015, at 2:45 AM, Ivan T. Ivanov wrote:
>
> Recent Qualcomm PMIC's devices are accessed over SPMI bus.
> Every PMIC has several "sub-function" devices inside.
>
> First three patches are adding device nodes to PM8841, PM8941 and PMA8084
> PMIC's.
> Next two are introducing PM8916
> On Feb 10, 2015, at 7:06 PM, Stephen Boyd wrote:
>
> Enable perf events on msm8660 devices by adding the pmu node.
>
> Signed-off-by: Stephen Boyd
> ---
> arch/arm/boot/dts/qcom-msm8660.dtsi | 5 +
> 1 file changed, 5 insertions(+)
applied
- k
--
Qualcomm Innovation Center, Inc.
The Q
Split out the 32-bit SCM implementation into its own file to prep for
supporting a 64-bit/ARM64 implementation as well. We create a simple shim
to ensure both versions conform to the same interface.
Signed-off-by: Kumar Gala
---
drivers/firmware/Makefile | 3 +-
drivers
Signed-off-by: Kumar Gala
---
Documentation/devicetree/bindings/arm/cpus.txt | 2 +
Documentation/devicetree/bindings/arm/msm/acc.txt | 19 ++
arch/arm64/kernel/Makefile | 3 +
arch/arm64/kernel/cpu_ops.c| 4 +
.../kernel/qcom-special
This patch set adds support for SMP boot on the MSM8x16 family of Qualcomm SoCs.
To support SMP on the MSM8x16 SoCs we need to add ARMv8/64-bit SCM interfaces to
setup the boot/release addresses for the secondary CPUs. In addition we need
a uniquie set of cpu ops. I'm aware the desired methods f
Add an implementation of the SCM interface that works on ARM64/64-bit SoCs
Signed-off-by: Kumar Gala
---
arch/arm64/Kconfig | 1 +
drivers/firmware/Makefile | 4 +
drivers/firmware/qcom_scm-64.c | 466 +
3 files changed, 471
> On Apr 14, 2015, at 11:36 AM, Mark Rutland wrote:
>
> On Fri, Apr 10, 2015 at 11:05:29AM +0100, Catalin Marinas wrote:
>> On Thu, Apr 09, 2015 at 12:37:06PM -0500, Kumar Gala wrote:
>>> This patch set adds support for SMP boot on the MSM8x16 family of Qualcomm
>&
> On Apr 9, 2015, at 4:17 PM, Arnd Bergmann wrote:
>
> On Thursday 09 April 2015 12:37:10 Kumar Gala wrote:
>> From: Abhimanyu Kapur
>>
>> Move the secondary_pen_release variable and the secondary_holding_pen
>> entry function to asm/smp_plat.h so that the oth
> On Apr 14, 2015, at 10:59 AM, Mark Rutland wrote:
>
> On Thu, Apr 09, 2015 at 06:37:10PM +0100, Kumar Gala wrote:
>> From: Abhimanyu Kapur
>>
>> Move the secondary_pen_release variable and the secondary_holding_pen
>> entry function to asm/smp
> On Feb 27, 2015, at 4:30 PM, Bjorn Andersson
> wrote:
>
> Add binding documentation for the Qualcomm Hardware Mutex.
>
> Signed-off-by: Bjorn Andersson
> —
>
Acked-by: Kumar Gala
- k
--
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc.
> On Apr 14, 2015, at 9:21 AM, Kumar Gala wrote:
>
>>>>
>>>> So please come up with proper technical arguments rather than the kernel
>>>> should take whatever SoC vendors dreamt of.
>>>
>>> There is no technical argument to be
> On Apr 13, 2015, at 4:41 AM, Catalin Marinas wrote:
>
> On Fri, Apr 10, 2015 at 02:06:33PM -0500, Kumar Gala wrote:
>> On Apr 10, 2015, at 11:10 AM, Catalin Marinas
>> wrote:
>>> On Fri, Apr 10, 2015 at 10:24:46AM -0500, Kumar Gala wrote:
>>>> On
> On Apr 10, 2015, at 7:19 PM, Stephen Boyd wrote:
>
> On 02/10/15 17:06, Stephen Boyd wrote:
>> Enable perf events on msm8660 devices by adding the pmu node.
>>
>> Signed-off-by: Stephen Boyd
>> ---
>
> Ping? Sorry, trying to clear out patches on a Friday night before going
> home.
I just m
Split out the 32-bit SCM implementation into its own file to prep for
supporting a 64-bit/ARM64 implementation as well. We create a simple shim
to ensure both versions conform to the same interface.
Signed-off-by: Kumar Gala
---
drivers/firmware/Makefile | 3 +-
drivers
From: Abhimanyu Kapur
Move the secondary_pen_release variable and the secondary_holding_pen
entry function to asm/smp_plat.h so that the other cpu ops implementations
can share them.
Signed-off-by: Abhimanyu Kapur
Signed-off-by: Kumar Gala
---
arch/arm64/include/asm/smp_plat.h | 2 ++
arch
Add an implementation of the SCM interface that works on ARM64/64-bit SoCs
Signed-off-by: Kumar Gala
---
arch/arm64/Kconfig | 1 +
drivers/firmware/Makefile | 4 +
drivers/firmware/qcom_scm-64.c | 466 +
3 files changed, 471
Signed-off-by: Kumar Gala
---
Documentation/devicetree/bindings/arm/cpus.txt | 2 +
Documentation/devicetree/bindings/arm/msm/acc.txt | 19 ++
arch/arm64/kernel/Makefile | 3 +
arch/arm64/kernel/cpu_ops.c| 4 +
.../kernel/qcom-special
This patch set adds support for SMP boot on the MSM8x16 family of Qualcomm SoCs.
To support SMP on the MSM8x16 SoCs we need to add ARMv8/64-bit SCM interfaces to
setup the boot/release addresses for the secondary CPUs. In addition we need
a uniquie set of cpu ops. I'm aware the desired methods f
Add an implementation of the SCM interface that works on ARM64/64-bit SoCs
Signed-off-by: Kumar Gala
---
arch/arm64/Kconfig | 1 +
drivers/firmware/Makefile | 4 +
drivers/firmware/qcom_scm-64.c | 466 +
3 files changed, 471
From: Abhimanyu Kapur
Add support to arm64 to provide a dt-based method to allow soc-vendors to
supply cpu_ops. Also move psci and smp_spin_table ops to use CPU_OF_TABLES.
Signed-off-by: Abhimanyu Kapur
Signed-off-by: Kumar Gala
---
arch/arm64/include/asm/cpu_ops.h | 5 +
arch/arm64
Signed-off-by: Kumar Gala
---
Documentation/devicetree/bindings/arm/cpus.txt| 2 +
Documentation/devicetree/bindings/arm/msm/acc.txt | 19 ++
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/cpu_ops.c| 343 ++
4 files
From: Abhimanyu Kapur
Move the secondary_pen_release variable and the secondary_holding_pen
entry function to asm/smp_plat.h so that the other cpu ops implementations
can share them.
Signed-off-by: Abhimanyu Kapur
Signed-off-by: Kumar Gala
---
arch/arm64/include/asm/smp_plat.h | 2 ++
arch
This patch set adds support for SMP boot on the MSM8x16 family of Qualcomm SoCs.
To support SMP on the MSM8x16 SoCs we need to add ARMv8/64-bit SCM interfaces to
setup the boot/release addresses for the secondary CPUs. In addition we need
a uniquie set of cpu ops. I'm aware the desired methods f
Split out the 32-bit SCM implementation into its own file to prep for
supporting a 64-bit/ARM64 implementation as well. We create a simple shim
to ensure both versions conform to the same interface.
Signed-off-by: Kumar Gala
---
drivers/firmware/Makefile | 3 +-
drivers
On Apr 3, 2015, at 1:18 PM, Olof Johansson wrote:
> On Fri, Apr 03, 2015 at 11:14:01AM -0700, Olof Johansson wrote:
>> On Fri, Apr 03, 2015 at 11:12:17AM -0700, Olof Johansson wrote:
>>> On Mon, Mar 23, 2015 at 05:51:05PM -0500, Kumar Gala wrote:
>>>> Add i
On Apr 2, 2015, at 3:37 AM, Nicolas Dechesne
wrote:
> Andy, Kumar,
>
> On Mon, Mar 16, 2015 at 10:03 PM, Kumar Gala wrote:
>> Andy Gross (1):
>> soc: qcom: gsbi: Add support for ADM CRCI muxing
>
> this commit seems to break the boot on IFC6410, it
On Apr 1, 2015, at 10:05 AM, Ivan T. Ivanov wrote:
> PM9816 has 2 SPMI devices per physical package. Add PMIC configuration
> nodes including sub-function device nodes and include them in boards,
> which are using 8x16 based chipset.
>
> PM9816 sub-function devices include:
>
> * GPIO block, w
On Apr 1, 2015, at 10:05 AM, Ivan T. Ivanov wrote:
> Add configuration nodes for following devices:
>
> * GPIO block, with 36 pins
> * MPP block, with 8 pins
> * Current ADC (IADC)
> * Volatage ADC (VADC), with multiple inputs
> * Thermal sensor device, which is using on chip VADC
> channel re
On Apr 1, 2015, at 10:05 AM, Ivan T. Ivanov wrote:
> Add SPMI PMIC Arbiter configuration nodes for MSM8916.
>
> Signed-off-by: Ivan T. Ivanov
> ---
> arch/arm64/boot/dts/qcom/msm8916.dtsi | 18 ++
> 1 file changed, 18 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8
On Apr 1, 2015, at 10:05 AM, Ivan T. Ivanov wrote:
> Add configuration nodes for multi purpose pins and
> thermal sensor devices. Thermal sensor will report
> PMIC die temperature.
>
> Signed-off-by: Ivan T. Ivanov
> ---
> arch/arm/boot/dts/qcom-pm8841.dtsi | 14 ++
> 1 file changed
MSM8974
arm: dts: qcom: Add 8x74 chipset SPMI PMIC's nodes
arm: dts: qcom: Add APQ8084 chipset SPMI PMIC's nodes
Kenneth Westfield (1):
arm: dts: qcom: Add LPASS Audio HW to IPQ8064 device tree
Kumar Gala (4):
arm: qcom: dts: gic: add compatible string for Qualcomm
The following changes since commit c517d838eb7d07bbe9507871fab3931deccff539:
Linux 4.0-rc1 (2015-02-22 18:21:14 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git
tags/qcom-defconfig-for-4.1-1
for you to fetch changes up to dc
The following changes since commit 9eccca0843205f87c00404b663188b88eb248051:
Linux 4.0-rc3 (2015-03-08 16:09:09 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git
tags/qcom-cleanup-for-4.1
for you to fetch changes up to 27842b
+++
> 1 file changed, 7 insertions(+)
Acked-by: Kumar Gala
- k
--
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-a
> ---
> drivers/soc/qcom/Kconfig | 7 +
> drivers/soc/qcom/Makefile | 1 +
> drivers/soc/qcom/spm.c| 385 ++++++
> 3 files changed, 393 insertions(+)
> create mode 100644 drivers/soc/qcom/spm.c
Acked-by: Kumar Gala
- k
--
Qualco
On Mar 26, 2015, at 4:51 AM, Ivan T. Ivanov wrote:
>
> On Wed, 2015-03-25 at 11:37 -0600, Gilad Avidov wrote:
>> pmic_arb v2 has no support for spmi non-data commands and thus
>> returns -EOPNOTSUPP on .cmd callback. This causes a failure in
>> spmi_drv_probe() which sends a wakeup command to t
On Mar 23, 2015, at 4:15 PM, Lina Iyer wrote:
> On Mon, Mar 23 2015 at 16:06 -0600, Kumar Gala wrote:
>>
>> On Mar 20, 2015, at 1:21 PM, Lina Iyer wrote:
>>
>>>
>>> Based on work by: Mahesh Sivasubramanian ,
>>> Ai Li , Praveen Chida
Add initial device tree support for Qualcomm APQ8016 SBC Evaluation board.
This board is also referred to as the DragonBoard 410c.
Signed-off-by: Kumar Gala
---
arch/arm64/boot/dts/qcom/Makefile | 2 +-
arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 22 +
arch/arm64
On Mar 20, 2015, at 1:21 PM, Lina Iyer wrote:
>
> Based on work by: Mahesh Sivasubramanian ,
> Ai Li , Praveen Chidambaram
> Original tree available at -
> git://codeaurora.org/quic/la/kernel/msm-3.10.git
>
> Cc: Stephen Boyd
> Cc: Arnd Bergmann
> Cc: Kevin Hilman
> Cc: Daniel Lezcano
> S
On Mar 20, 2015, at 1:21 PM, Lina Iyer wrote:
> Each Krait CPU in the QCOM 8074/8974 SoC has an SAW power controller to
> regulate the power to the cpu and aide the core in entering idle states.
> Reference the SAW instance and associate the instance with the CPU core.
>
>
On Mar 17, 2015, at 4:24 AM, Stanimir Varbanov
wrote:
> On 03/13/2015 06:06 PM, Kumar Gala wrote:
>> Add initial device tree support for Qualcomm MSM8916 SoC and MTP8916
>> evaluation board. At the current time we only boot up a single processor.
>>
>> Signed-off-b
The following changes since commit c517d838eb7d07bbe9507871fab3931deccff539:
Linux 4.0-rc1 (2015-02-22 18:21:14 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git
tags/qcom-defconfig-for-4.1
for you to fetch changes up to 9e03
The following changes since commit c517d838eb7d07bbe9507871fab3931deccff539:
Linux 4.0-rc1 (2015-02-22 18:21:14 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git
tags/qcom-arm64-for-4.1
for you to fetch changes up to d7f64a44
support for ADM CRCI muxing
Kumar Gala (4):
ARM: qcom: Merge scm and scm boot code together
ARM: qcom: Cleanup scm interface to only export what is needed
ARM: qcom: Prep scm code for move to drivers/firmware
firmware: qcom: scm: Move the scm driver to drivers/firmware
Lina
I’ve applied these to my ‘soc’ branch.
- k
On Mar 13, 2015, at 12:16 PM, Lina Iyer wrote:
> Kumar, Stephen, Andy,
>
> Any comments on this patchset?
>
> Thanks,
> Lina
>
> On Mon, Mar 02 2015 at 16:30 -0700, Lina Iyer wrote:
>> Hi,
>>
>> This series of patches adds SCM cold boot clean up an
On Mar 13, 2015, at 11:25 AM, Mark Rutland wrote:
> On Fri, Mar 13, 2015 at 03:50:42PM +0000, Kumar Gala wrote:
>>
>> On Mar 13, 2015, at 5:52 AM, Mark Rutland wrote:
>>
>>>> +/ {
>>>> + chosen {
>>>> + stdout-path = &bl
Add initial device tree support for Qualcomm MSM8916 SoC and MTP8916
evaluation board. At the current time we only boot up a single processor.
Signed-off-by: Kumar Gala
---
v5:
* killed use of skeleton, moved to addr/size cells both being 2
* Added serial alias in prep of being able to spec
On Mar 13, 2015, at 5:52 AM, Mark Rutland wrote:
>> +/ {
>> +chosen {
>> +stdout-path = &blsp1_uart2;
>> +};
>
> It would be good if we had the configuration too (see
> Documentation/devicetree/bindings/chosen.txt), as that avoids any
> reliance on kernel defaults.
>
> You
On Mar 12, 2015, at 1:25 PM, Mark Rutland wrote:
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+
Add initial device tree support for Qualcomm MSM8916 SoC and MTP8916
evaluation board. At the current time we only boot up a single processor.
Signed-off-by: Kumar Gala
---
v4:
* Added chosen node so we dont need to spec everything for earlycon
* fixed up timer node to armv8, dropped clock
On Mar 12, 2015, at 12:05 PM, Mark Rutland wrote:
> Hi Kumar,
>
>> +/ {
>> +model = "Qualcomm Technologies, Inc. MSM 8916 MTP";
>> +compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp-smb1360",
>> +"qcom,msm8916", "qcom,mtp";
>> +};
>
> No /chosen/stdout-path?
Nope
On Mar 11, 2015, at 3:20 PM, Arnd Bergmann wrote:
> On Wednesday 11 March 2015 08:33:04 Bjorn Andersson wrote:
>>
>> But are these values actually used by the boot loader?
>>
>> As far as I could see in 8974 the dtbTool provided by Qualcomm
>> extracts the values from the list of dtbs and use
On Mar 11, 2015, at 10:33 AM, Bjorn Andersson wrote:
> On Tue, Mar 10, 2015 at 12:57 PM, Kumar Gala wrote:
>>
>> On Mar 10, 2015, at 2:52 PM, Arnd Bergmann wrote:
>>
>>> On Tuesday 10 March 2015 13:10:08 Kumar Gala wrote:
>>>>>>>>
Add qcom,msm-id and qcom,board-id to allow bootloader to identify which
device tree to boot on the MTP8916 boards.
Signed-off-by: Kumar Gala
---
arch/arm64/boot/dts/qcom/msm8916-mtp.dts | 3 +++
arch/arm64/boot/dts/qcom/msm8916.dtsi| 5 +
2 files changed, 8 insertions(+)
diff --git a
Add initial device tree support for Qualcomm MSM8916 SoC and MTP8916
evaluation board. At the current time we only boot up a single processor.
Signed-off-by: Kumar Gala
---
v3:
* Removed qcom,msm-id and qcom,board-id
* Added top level compat for "qcom,msm8916-mtp-smb1360"
v2:
*
The top level qcom,msm-id and qcom,board-id are utilized by bootloaders
on Qualcomm MSM platforms to determine which device tree should be
utilized and passed to the kernel.
Cc:
Signed-off-by: Kumar Gala
---
Documentation/devicetree/bindings/arm/msm/ids.txt | 65
From: Abhimanyu Kapur
Add support for Qualcomm MSM8916 SoC in arm64 Kconfig and defconfig.
Enable MSM8916 clock, pin control, and MSM serial driver utilized by
MSM8916 and Qualcomm SoCs in general.
Signed-off-by: Kumar Gala
Signed-off-by: Abhimanyu Kapur
---
v3:
* Dropped ARCH_REQUIRE_GPIOLIB
On Mar 10, 2015, at 2:52 PM, Arnd Bergmann wrote:
> On Tuesday 10 March 2015 13:10:08 Kumar Gala wrote:
>>>>>>>>>>> The top level qcom,msm-id and qcom,board-id are utilized by
>>>>>>>>>>> bootloaders
>>&g
>>>>>>>>> The top level qcom,msm-id and qcom,board-id are utilized by
>>>>>>>>> bootloaders
>>>>>>>>>> on Qualcomm MSM platforms to determine which device tree should be
>>>>>>&g
On Mar 9, 2015, at 10:16 AM, Lina Iyer wrote:
> SPM is a hardware block that controls the peripheral logic surrounding
> the application cores (cpu/l$). When the core executes WFI instruction,
> the SPM takes over the putting the core in low power state as
> configured. The wake up for the SPM i
On Mar 9, 2015, at 7:11 AM, Arnd Bergmann wrote:
> On Friday 06 March 2015 14:37:52 Kumar Gala wrote:
>> On Mar 6, 2015, at 1:15 PM, Olof Johansson wrote:
>>
>>> On Fri, Mar 6, 2015 at 8:08 AM, Kumar Gala wrote:
>>>>
>>>> On Mar 5, 2015, at 7:
On Mar 6, 2015, at 4:03 PM, Kenneth Westfield wrote:
> On Fri, Mar 06, 2015 at 10:07:01AM -0600, Kumar Gala wrote:
>> On Mar 5, 2015, at 7:51 PM, Kenneth Westfield
>> wrote:
>>> On Thu, Mar 05, 2015 at 12:52:30PM -0600, Kumar Gala wrote:
>>>> On Mar 3,
On Mar 6, 2015, at 1:15 PM, Olof Johansson wrote:
> On Fri, Mar 6, 2015 at 8:08 AM, Kumar Gala wrote:
>>
>> On Mar 5, 2015, at 7:59 PM, Olof Johansson wrote:
>>
>>> On Thu, Mar 5, 2015 at 12:23 PM, Kumar Gala wrote:
>>>>
>>&g
On Mar 5, 2015, at 7:59 PM, Olof Johansson wrote:
> On Thu, Mar 5, 2015 at 12:23 PM, Kumar Gala wrote:
>>
>> On Mar 5, 2015, at 1:42 PM, Kevin Hilman wrote:
>>
>>> Kumar Gala writes:
>>>
>>>> The top level qcom,msm-id and qcom,board-
On Mar 5, 2015, at 7:51 PM, Kenneth Westfield wrote:
> On Thu, Mar 05, 2015 at 12:52:30PM -0600, Kumar Gala wrote:
>>
>> On Mar 3, 2015, at 6:21 PM, Kenneth Westfield
>> wrote:
>>
>>> +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
On Mar 5, 2015, at 1:42 PM, Kevin Hilman wrote:
> Kumar Gala writes:
>
>> The top level qcom,msm-id and qcom,board-id are utilized by bootloaders
>> on Qualcomm MSM platforms to determine which device tree should be
>> utilized and passed to the kernel.
>>
&
On Mar 3, 2015, at 6:21 PM, Kenneth Westfield wrote:
> From: Kenneth Westfield
>
> Add documentation to the sound directory of the
> device-tree bindings for the QTi LPASS CPU DAI
> device.
>
> Signed-off-by: Kenneth Westfield
> Acked-by: Banajit Goswami
> ---
> .../devicetree/bindings/soun
On Mar 4, 2015, at 4:33 PM, Stephen Boyd wrote:
> On 03/04/15 13:13, Kumar Gala wrote:
>> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
>> index 1b8e973..4c8b119 100644
>> --- a/arch/arm64/Kconfig
>> +++ b/arch/arm64/Kconfig
>> @@ -177,6 +177,15 @@
On Mar 2, 2015, at 5:54 PM, Rob Clark wrote:
> Seems required for kexec (where --atags support is mutually exclusive
> with --dtb).
>
> Signed-off-by: Rob Clark
> ---
> arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 9 +
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm/boot/dt
On Mar 4, 2015, at 3:19 PM, Arnd Bergmann wrote:
> On Wednesday 04 March 2015 15:13:20 Kumar Gala wrote:
>> The top level qcom,msm-id and qcom,board-id are utilized by bootloaders
>> on Qualcomm MSM platforms to determine which device tree should be
>> utilized and
The top level qcom,msm-id and qcom,board-id are utilized by bootloaders
on Qualcomm MSM platforms to determine which device tree should be
utilized and passed to the kernel.
Cc:
Signed-off-by: Kumar Gala
---
Documentation/devicetree/bindings/arm/msm/ids.txt | 65
Add initial device tree support for Qualcomm MSM8916 SoC and MTP8916
evaluation board. At the current time we only boot up a single processor.
Signed-off-by: Kumar Gala
---
v2:
* Updated to dropping CONFIG_ARCH_QCOM_MSM8916
* Updated to use qcom-ids.h
arch/arm64/boot/dts/Makefile
From: Abhimanyu Kapur
Add support for Qualcomm MSM8916 SoC in arm64 Kconfig and defconfig.
Enable MSM8916 clock, pin control, and MSM serial driver utilized by
MSM8916 and Qualcomm SoCs in general.
Signed-off-by: Kumar Gala
Signed-off-by: Abhimanyu Kapur
---
v2:
* Dropped
Document the Qualcomm MSM GICs implementation as compatible with the
ARM GIC standard.
Signed-off-by: Kumar Gala
---
Documentation/devicetree/bindings/arm/gic.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/gic.txt
b/Documentation/devicetree
On Mar 2, 2015, at 2:30 PM, Lina Iyer wrote:
> Support powering down the calling cpu, by trapping into SCM. This
> termination function triggers the ARM cpu to execute WFI instruction,
> causing the power controller to safely power the cpu down.
>
> Caches may be flushed before powering down th
From: Abhimanyu Kapur
Add support for Qualcomm MSM8916 SoC in arm64 Kconfig and defconfig.
Enable MSM serial driver utilized by MSM8916 and Qualcomm SoCs in
general.
Signed-off-by: Kumar Gala
Signed-off-by: Abhimanyu Kapur
---
arch/arm64/Kconfig | 18 ++
arch/arm64
Add initial device tree support for Qualcomm MSM8916 SoC and MTP8916
evaluation board. At the current time we only boot up a single processor.
Signed-off-by: Kumar Gala
---
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/qcom/Makefile | 5 +
arch/arm64/boot/dts
+int qcom_scm_set_warm_boot_addr(void *entry, int cpu)
>>>
>>> I’d really like to see if we could make the set_boot_addr and
>>> set_warm_boot_addr have the same interfaces.
>>
>> I am working on making the interfaces similar. There is some check in
>> the platsmp.c that uses the cold boot
On Feb 27, 2015, at 3:51 PM, Lina Iyer wrote:
> On Fri, Feb 27 2015 at 14:33 -0700, Kumar Gala wrote:
>>
>> On Feb 27, 2015, at 2:47 PM, Lina Iyer wrote:
>>
>>> A core can be powered down for cpuidle or when it is hotplugged off. In
>>> either cas
On Feb 27, 2015, at 12:58 PM, Stephen Boyd wrote:
> On 02/26/15 13:59, Kumar Gala wrote:
>> Architectural changes in the ARM Linux kernel tree mandate the eventual
>> removal of the mach-* directories. Move the scm driver to
>> drivers/firmware and the scm header to inc
On Feb 27, 2015, at 2:47 PM, Lina Iyer wrote:
> A core can be powered down for cpuidle or when it is hotplugged off. In
> either case, the warmboot return address would be different. Allow
> setting the warmboot address for a specific cpu, optimize and write to
> the firmware, if the address is
Architectural changes in the ARM Linux kernel tree mandate the eventual
removal of the mach-* directories. Move the scm driver to
drivers/firmware and the scm header to include/linux to support that
removal.
Signed-off-by: Kumar Gala
---
v2:
* Moved to -M style diff output
* Added in missing
On Feb 27, 2015, at 2:07 PM, Lina Iyer wrote:
> On Thu, Feb 26 2015 at 15:20 -0700, Lina Iyer wrote:
>> On Thu, Feb 26 2015 at 15:10 -0700, Kumar Gala wrote:
>>>
>>> On Feb 25, 2015, at 4:54 PM, Lina Iyer wrote:
>>>
>>>> Hi,
>>>>
On Feb 25, 2015, at 4:54 PM, Lina Iyer wrote:
> Hi,
>
> These patches used to be part of my cpuidle patchset, think these can go in
> independently.
>
> The patches do the following -
>
> 1. Add QCOM Secure Monitor specific enumeration for warm boot on qcom targets
> 2. Add an API to set up t
1 - 100 of 446 matches
Mail list logo