On 12/08/09 18:26, Ian Hayes wrote:
I'm assuming that you're running the Targeted policy and not the strict
policy...
RHEL5 has a module for ccs, but I haven't taken it apart. The files for
fencing may be incorrectly labeled or the policy doesn't allow fenced to
run correctly.
It's largely an
Hi,
I'm hitting a problem that mounting on a gfs2 volume hangs.
ENV:
1) cluster.conf
[...@cool gfs2]$ cat /etc/cluster/cluster.conf
Hi everyone,
I hope someone can help me. I am have created a DRBD device with 2
servers and present this device to 2 other servers in a RedHat cluster
using 2 iSCSI paths from each DRBD server to each cluster node (i.e., 4
paths per cluster node, 8 paths in total). I then use multipath so that
Hi all
Just an update on the CentOS 5.3 and lucci.
When installing the network and enabling IPV6, the default , and well
known, 127.0.0.1 localhost.localdomain localhost is replaced with a new
1:: localhost.localdomain localhost.
Luci lives on 127.0.0.1, so if that is not in /etc/hosts, luc
Greetings,
2009/8/12 Hakan VELIOGLU :
> Hi list,
>
> I am trying a two node cluster with RH 5.3 on Sun X4150 hardware. I use a
IIRC, Sun x4150 has four ethernet ports. Two can be used for outside
networking and two can be bonded and used for heartbeat.
ALOM can be used for fencing and can be on
Hi,
I have a question about the qdisk concept.
My understanding of qdisk is that it is used as a tie-breaker, but it looks
like it is more a heatbeat vector than a simple tie-breaker.
My setup consists of 4 nodes located on 2 different production sites (2+2)
using SAN shared storage (2 disk frame
On Aug 12, 2009, at 12:26, Ian Hayes wrote:
I'm assuming that you're running the Targeted policy and not the
strict policy...
RHEL5 has a module for ccs, but I haven't taken it apart. The files
for fencing may be incorrectly labeled or the policy doesn't allow
fenced to run correctly.
There may be a dontaudit clause in either the base or the ccs modules. Try
inserting the enableaudit.pp module and see what happens. I'm not sure if
RHEL5.3 supports "semodule -DB" but that would turn off dontaudit also.
On Wed, Aug 12, 2009 at 10:50 AM, de Jong, MarkJan wrote:
> That’s just it.
That's just it. There are no logs being generated in audit.log. I'm pretty well
versed in creating custom SELInux policies.
I've reported on issues in the past where SELinux does not generate logs. It
was a while ago and have since forgotten what the resolution was but I was
fixed by the devs..
I'm assuming that you're running the Targeted policy and not the strict
policy...
RHEL5 has a module for ccs, but I haven't taken it apart. The files for
fencing may be incorrectly labeled or the policy doesn't allow fenced to run
correctly.
Look at your /var/log/audit/audit.log files and see wha
It seems that with selinux enabled, fencing hangs during 'service cman start'.
When selinux is set to enforcing, the cman startup script hangs at "Starting
fencing " and never times out.
There are NO logs related to the event in /var/log/audit/audit.log, nor
anything telling in /var/log/mess
1) You can use fence_manual if you don't have a real fence device. Not
recommended, of course.
2) I believe you want to look at Pirhana
On Wed, Aug 12, 2009 at 12:08 AM, LEROUX Ludovic wrote:
> i have a linux redhat cluster with two redhat 5.3 nodes.
> I have a shared iscsi disk with gfs.
> An
If you have a drac, it should either be visible with the OpenManage
interface, commands, or as a 10/100 port on the far left of the back of the
server; and also should give you a setup screen during bootup. If you don't
have one though, you can still use ipmi fencing to the on-board BMC/ESM
card.
- robe...@gmail.com den ileti -
Tarih: Wed, 12 Aug 2009 11:21:00 +0200
Kimden: Juan Ramon Martin Blanco
Yanıt Adresi:linux clustering
Konu: Re: [Linux-cluster] Is there any backup heartbeat channel
Kime: linux clustering
2009/8/12 Hakan VELIOGLU
Hi list,
I am tryin
2009/8/12 Hakan VELIOGLU
> Hi list,
>
> I am trying a two node cluster with RH 5.3 on Sun X4150 hardware. I use a
> private network for heartbeat channel and fence_ipmilan for fencing the two
> node. When I unplug the heartbeat channel cable, both cluster nodes shut
> themselves down with fence_i
Hi list,
I am trying a two node cluster with RH 5.3 on Sun X4150 hardware. I
use a private network for heartbeat channel and fence_ipmilan for
fencing the two node. When I unplug the heartbeat channel cable, both
cluster nodes shut themselves down with fence_ipmilan.
I think the single po
Hi Marc,
I am using the git master, while running ./autogen.sh I got
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal -I m4
configure.ac:7: error: Libtool version 2.2.7 or higher is required
/usr/share/aclocal/libtool.m4:46: LT_PREREQ is
i have a linux redhat cluster with two redhat 5.3 nodes.
I have a shared iscsi disk with gfs.
And i created an oracle service which mounts the gfs file system and start an
oracle instance in fail over mode.
I have two questions:
1°) I don't have a fence device. Is it possible to create a cluster w
18 matches
Mail list logo
