The clustering will only works if you run same operating systems on top of same
hardware platform ppc, intel!https://overview.mail.yahoo.com?.src=iOS";>Sent from Yahoo Mail
for iPhone--
Linux-cluster mailing list
Linux-cluster@redhat.com
https://www.redhat.com/mailman/listinfo/linux-cluster
Have you tried simple things like disabling iptables or selinux, just to
test? If that doesn't work, and it's a small cluster, try unicast and
see if that helps (again, even if just to test).
On 12/06/14 10:29 AM, Arun G Nair wrote:
We have multicast enabled on the switch. I've also tried the
I always used "tcpdump -ni bond1 port 5405" to check if both nodes are
involved in the comunication, if isn't like that, that would say is
multicast problem
2014-06-12 16:43 GMT+02:00 Kaloyan Kovachev :
> Do you have a different auth key on each node by any chance?
>
>
> On 2014-06-12 17:29, Arun
Do you have a different auth key on each node by any chance?
On 2014-06-12 17:29, Arun G Nair wrote:
We have multicast enabled on the switch. I've also tried the
multicast.py tool from RH's knowledge base to test multicast and I see
the expected output, though the tool uses a different multica
We have multicast enabled on the switch. I've also tried the multicast.py
tool from RH's knowledge base to test multicast and I see the expected
output, though the tool uses a different multicast IP( guess that shouldn't
matter). I've tried increasing the post_join_delay to 360 seconds to give
me e
2014 8:19 PM
To: linux-cluster@redhat.com
Subject: [Linux-cluster] 2-node cluster fence loop
Hello,
What are the reasons for fence loops when only cman is started ? We have an
RHEL 6.5 2-node cluster which goes in to a fence loop and every time we start
cman on both nodes. Either one fences
On 11/06/14 10:48 AM, Arun G Nair wrote:
Hello,
What are the reasons for fence loops when only cman is started ? We
have an RHEL 6.5 2-node cluster which goes in to a fence loop and every
time we start cman on both nodes. Either one fences the other. Multicast
seems to be working properly. M
Hello,
What are the reasons for fence loops when only cman is started ? We have
an RHEL 6.5 2-node cluster which goes in to a fence loop and every time we
start cman on both nodes. Either one fences the other. Multicast seems to
be working properly. My understanding is that without rgmanager ru
