Hi,
is it possible to bypass the decoding-chip on the Siemens-DVB-Cards?
This feature would be very nice to watch other video formats (like DivX)
or pictures on the tv through the tv-out of the DVB-cars.
Boris
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-
I am searching all over the MPEG 2 Format (especially PES-Format)
I'll try to make a tool like PVAstrumento, that can handle VPTS and APTS
correct.
I also find a nice site http://ddc.mahns.com/se.html which simulates
an MPEG editor, maybe I will also find out how to multiplex ac3 data
in a mpeg-f
Hi,
On Jun 4, 23:12, Axel Gruber wrote:
> Subject: [linux-dvb] Convert VDR-Files (DVB-SMPEG2) to VCD (MPEG1) ?
> Hello to everybody.
>
> Does anyone succesfully converted a File recorded with VDR and the DVB-S to a
VCD comparible file (MPEG1 and PAL-Resolution)
>
> Only with LINUX !
I have alrea
Hi,
On Jun 6, 21:52, Rolf Hakenes wrote:
> Subject: [linux-dvb] Tuning survey DTV - What features are needed ???
> Hi,
> support DVB-C/T cards (if they will appear in the end), the other deals with
> Diseq/several satellites and such things. Maybe there are even more choices
??
> Who is intereste
Andrej Jouravlev writes:
> Is it possible to setup more then 256 filters?
> I am trying to obtain _raw TS_ by set all possible filters.
> The question - is it possible to setup 0x1fff number of filters?
>
> When i am trying to do this - i receive "too many open files" error.
> But i canno
Hi,
as I am considering at the moment to extend the channel tuning mechanism of DTV,
I would like to request a few opinions about the most important features needed.
>From my point of view, there are two possible directions to consider, one is to
support DVB-C/T cards (if they will appear in the
> > There was a discussion about this for about two month. The result was,
> > that you cannot set the timer in your CMOS.
>
> You can, at least on my board. apsleep does set the alarm time and my
> BIOS uses it as well.
>
> apmsleep -n
For me it does'nt work, the call _never_ returns (and does
Peter Seyringer wrote:
>
> Hello!
>
> > What happened to the RTC-programming to wake up ATX-boards?
> > -So vdr could program it's wake up-time itself as well.
> There was a discussion about this for about two month. The result was, that
> you cannot set the timer in your CMOS.
You can, at leas
Hi All!
Is it possible to setup more then 256 filters?
I am trying to obtain _raw TS_ by set all possible filters.
The question - is it possible to setup 0x1fff number of filters?
When i am trying to do this - i receive "too many open files" error.
But i cannot understand why:
[root@test driv
On Wed, 6 Jun 2001, Peter Funk wrote:
> Joerg Riechardt:
> > DW-tv:10786:v:0:22000:305:306:0:1:9005
> > works for me.
> > VDR seemingly can not handle 21997 or any value lower 22000.
> > Jörg
>
> With VDR 0.72, DVB 0.8.2 and kernel 2.2.18 (SuSE 7.1) I can verify this.
> I've just replaced all o
Hello!
> What happened to the RTC-programming to wake up ATX-boards?
> -So vdr could program it's wake up-time itself as well.
There was a discussion about this for about two month. The result was, that
you cannot set the timer in your CMOS.
Peter
--
Info:
To unsubscribe send a mail to [EMAI
On Wednesday, 6. June 2001 17:31, Jens Groth wrote:
> Hello Matthias,
>
> > You know the point where you switch off the power so a few Minutes before
> > that point you let "cron/at" execute
> >
> > (halt/init 0/poweroff/)
> >
> > And the system will shutdown and your switching clock will switch
Joerg Riechardt:
> DW-tv:10786:v:0:22000:305:306:0:1:9005
> works for me.
> VDR seemingly can not handle 21997 or any value lower 22000.
> Jörg
With VDR 0.72, DVB 0.8.2 and kernel 2.2.18 (SuSE 7.1) I can verify this.
I've just replaced all occurences of 21997 with 22000 in my
/video/channels.con
Andrej,
Thanks! and sorry for send to your personal account, I did not catch the address
change to the
list destination when I replied originally. my bad(g)...
Bill - DCS
Andrej Jouravlev wrote:
> you can find datasheet on ftp://aj.sat.lucky.net/pub/pdf
>
> On Wed, 6 Jun 2001, Willi
Hi!
Emil Naepflein wrote:
>This should work. I hadn't time to try this but you could change the
>scaling in dvb.c for 16:9 to 133 instead of 177.
That dosent work! nor does saa7146.c the routine that calculates the
vertical scaling seems not to be called at all.
I guess the scaling is calculat
hi all!
has anyone tried to run vdr in a ramdisk?
my intention is to put the hd to sleep. i only
want to activate it for playback or recording.
.) what size should the ramdisk be?
.) what has to be in the ramdisk?
.) can this work?
thanx!
servus hannes!
Johannes Schoeller
<[EMAIL PROTECTED]>
Hallo,
after compiling this version 0.80 i got only "not sync'ed".
The old version 0.8pre8 works fine. This looks like a old version
that did not work with dvb-c,or do it ?
Michael Kloss
Jun 3 13:42:38 linuxtv vdr[2077]: VDR version 0.80 started
Jun 3 13:42:38 linuxtv vdr[2077]: loading /vide
Johannes Stezenbach writes:
> Andrej Jouravlev wrote:
> >
> > I am trying to setup few filters
> > something like:
> >
> > pesFilterParams.pid = 0;
> > pesFilterParams.input = DMX_IN_FRONTEND;
> > pesFilterParams.output = DMX_OUT_TS_TAP;
> > pesFilterParams.pesType = DMX_PES_AUDI
Hello Matthias,
> You know the point where you switch off the power so a few Minutes before
> that point you let "cron/at" execute
>
> (halt/init 0/poweroff/)
>
> And the system will shutdown and your switching clock will switch off the
> power supply.
>
> There is simply no problem at all. At
Andrej Jouravlev wrote:
>
> I am trying to setup few filters
> something like:
>
> pesFilterParams.pid = 0;
> pesFilterParams.input = DMX_IN_FRONTEND;
> pesFilterParams.output = DMX_OUT_TS_TAP;
> pesFilterParams.pesType = DMX_PES_AUDIO;
> pesFilterParams.flags = DMX_IMMEDIATE_START;
>
Thus spake Marcus O.C. Metzler ([EMAIL PROTECTED]):
> > Does DVB works under linux-sparc (IIe)?
>
> Theoretically it should, but it has never been tested. If you have an
> oportunity to test it, tell us how it works.
I have just received a Sunblade 100, nice Computer, but after having
played
FAVRE Gregoire writes:
>
> Hello,
>
> Does DVB works under linux-sparc (IIe)?
>
Theoretically it should, but it has never been tested. If you have an
oportunity to test it, tell us how it works.
Marcus
-
Dr. Marcus Metz
Hello,
Does DVB works under linux-sparc (IIe)?
Thanks you very much,
Greg
http://ulima.unil.ch/greg ICQ:16624071 mailto:[EMAIL PROTECTED]
-- No attachments (even text) are allowed --
-- Type: application/pgp-signature
Hi!
> VDR seemingly can not handle 21997 or any value lower 22000.
Well, I tried both values (21997 and 22000), they both worked for me.
Thorsten
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
Hi!
I am trying to setup few filters
something like:
pesFilterParams.pid = 0;
pesFilterParams.input = DMX_IN_FRONTEND;
pesFilterParams.output = DMX_OUT_TS_TAP;
pesFilterParams.pesType = DMX_PES_AUDIO;
pesFilterParams.flags = DMX_IMMEDIATE_START;
if (ioctl(fd_demux2, DMX_SET_PES_FILTER
DW-tv:10786:v:0:22000:305:306:0:1:9005
works for me.
VDR seemingly can not handle 21997 or any value lower 22000.
Jörg
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
HELP!!!
After 'make'. I recieve tne next:
[root@mail /DVB]# make
(cd driver; make)
make[1]: /scripts/pathdown.sh: Command not found
make[1]: Entering directory '/DVB/driver'
and etc.
All Mandrake 8.0 development packeges installed.
Thanks in advance.
--
Info:
To unsubscribe send a ma
Hi,
>
> What would be the best way to enable 16:9 Output?
I asked this question already one month ago but didn't get any answer.
:( I tried it with the ioctl VIDIOCSASPECTRATIO from VDR but had no
success.
> Secondly trying to change the driver to treat 16:9
> the same as a 4:3.
This should w
Hi!
What would be the best way to enable 16:9 Output?
This is especially usefull since one gains a lot
of Quality on a 16:9 TV Set.
First Changing the Aspect of the mpeg2 File with
a tool based on mpegtools. 16:9 to 4:3
Secondly trying to change the driver to treat 16:9
the same as a 4:3.
Bot
I think you should try 0.8.2 driver, AFAIK 0.9 is not compatible with dvbd.
Don't compile i2c and v4l in kernel
And the kernel should use videodev.c and videodev.h from the DVB driver,
since some functions are overlaping.
- Original Message -
From: "Silaghi Adrian George" <[EMAIL PROTECTE
Hi All,
Can somebody tell show me the way to get _complete_ TS from the
Stv0299 ( card WinTV Nova) via the SAA7146 ?
I have tried to lock on the signal and call ioctl command CCAPTURE,
but nothing appear from the /dev/ost/vbr or /dev/ost/video...
Only the filtered PID's is possible to get..
Matthias Weingart wrote:
>
> VDR tries several time to switch to that channel with no success. So
> activating that same PID again does NOT solve the problem.
I haven't looked in VDRs tuning logic, but I suspect that if setting
the video PID fails, VDR does not attempt to set the audio PID,
and
> -Ursprüngliche Nachricht-
> Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Gesendet: Mittwoch, 6. Juni 2001 09:21
> An: [EMAIL PROTECTED]
> Betreff: [linux-dvb] Multiple languages and SECA
>
>
> Hi All,
>
> I'm having trouble switching between multiple audio tracks on
> SECA enc
33 matches
Mail list logo
