hi,
i grapple with the following problem:
my cable-provider don't make available the mediavision-signal (dt-telekom-cable), but
they receive it via satellit and dropped the signal with a few corrections in
frequency and symbolrates in the cable-bouquets.
i can't coax something out of something
Hello
My primary DVB card is a Siemens DVB-S Rev. 1.3 and it works fine with DVB
and VDR. When I add my new secondary card (Hauppauge WinTV Nova Rev. 1.1) the
system simply stops while loading the saa7146_core.o driver. There is no
error message. I tried debug=3 but nothing appears in syslog.
I have been attempting to receive UK DVB-T broadcasts using the Hauppauge
NOVA-t card. The card is now in stock at retailers in the UK and provides
access to the first useful UK channels using a PC - BBC1, BBC2, BBC Choice,
ITV1, ITV2, Channel 4, Channel 5 plus others. These are all
Hi,
where can i download the Siemens drivers from the 2001-09-14 ??? There are
NOT on the LINUXTV Download Section
Is there someone who can mail it to me? Or give mea Link for donwload?
So long... Niko
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with unsubscribe linux-dvb
- Original Message -
From: Nikolaus Isele [EMAIL PROTECTED]
To: LINUX-DVB Mailingliste (E-Mail) [EMAIL PROTECTED]
Sent: Wednesday, October 03, 2001 12:44 PM
Subject: [linux-dvb] Siemens DVB Drivers dated 2001-09-14 --- NOT FOUND!
Hi,
where can i download the Siemens drivers from the
Hi!
On Tue, 2 Oct 2001, Ewald Maier wrote:
But it does not here, so this part also seems to be correct.
the confusing for me is, that the device is always busy and not
synced, but as we see below, it is synced:
[...]
Errm, no... This sync has nothing to do with Channel not sync'ed. They
Excuse me, but I need to know if my CPU
(Duron 750MHz) is too slow for play live
video.
Can someone test:
ts2pes 165 100 /dev/ost/dvr|mplayer
-dropframe -
(Linux top utility shows 40-50%
CPU-usage, but I think it can be false)
and tell me if video is OK (or there are
blocks)?
please test
Hi,
some days ago, I watched TV on my Linux box using the dvb driver.
Suddendly, the machine completely crashed. I rebooted it and tried
to load the driver again, but I only got these messages:
[...]
insmod dvb.o init_chan=2 pids_off=0 readfirm=1; \
)
Using
Hi!
On Wed, 3 Oct 2001, Andrei Boros wrote:
I am confused.
DVB/driver/videodev.h defines :
#define VIDEO_MAJOR 81
Also, MAKEDEV creates /dev/video* with MAJOR 81.
DVB/ost/src/video.c defines :
#define OST_VIDEO_MAJOR 250
/dev/video with major 81 is the Video4Linux interface. When
Hi,
1) when doing make install the file key_definition.dcl wasn't copied
to the dist-dir (didn't examine that, but I suppose you just forgot
to include that in the makefile)
Yes, you are right (grrr)...please add 'key_definition.dcl' to the DTV_CONF
variable in 'src/dtv/Makefile'.
Reiner Rosin wrote:
Hi,
...
There is always a diseqc message sent. This is, because I have noticed a
lot more tuning problems with my equipment (I do not have a diseqc
switch), if I did only send a message when needed. After going back to
'always diseqc', all went fine for me,
Hello,
where can I find the source code for gVideo. If I check out the driver
from cvs (www.linuxtv.org) there is a directory gVideo, but it just
contains two other directories. Nothing to compile ...
Cheers
Robert
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with unsubscribe
Hello to all,
I've read in a lot of mails about ac3dec
to stream ac3 data from vdr to the DSP device
to get the S/PDIF output working.
I have tested this with several versions of ac3dec
and a52dec written by Aaron. But in every case i get
only one result out of my SBLive!/DXR3 card.
It's Dolby
Am 3.10.2001 um 20:11 schrieb Robert Kasunic:
where can I find the source code for gVideo. If I check out the driver
from cvs (www.linuxtv.org) there is a directory gVideo, but it just
contains two other directories. Nothing to compile ...
gVideo was never ported to the new API, so it was
14 matches
Mail list logo
