> I have the same problem with one of my two cards. The CCVS out of one card
> was broken after a few days and i checked out, that my tv-set (an old on from
> Philips) produces a lot of leakage current on ground connections - DVB-s
> seems to be very sensitve to this. So i use this card for second
Hello Ruurd,
On Wed, 20 Mar 2002 02:07:31 -0800 (PST)
"Ruurd A. Reitsma" <[EMAIL PROTECTED]> wrote:
> Hi,
>
> two days after connecting my dvb-s to a different tv set than the one I used
> before (using the cvbs connector) , the signal was suddenly gone. Only a very
> weak black/white picture r
On Wed, Mar 20, 2002 at 07:02:11AM -0700, Jens Thomsen wrote:
> I have done a preliminary examination of this file and it appears to
> be a raw transport stream (it has 0x47 every 188 bytes). So can someone
> help me find Info on Transport streams?
IEC13818-1 will tell you everything there i
I have done a preliminary examination of this file and it appears to
be a raw transport stream (it has 0x47 every 188 bytes). So can someone
help me find Info on Transport streams?
Thanx
--
Jens Thomsen
Senior Developer
Wow Digital TV
10421 S. Jordan Gateway
South Jordan, Utah 840095
801-501
Does anyone have or know where to get info on the ".trp" file format?
This format is used by Sencore and Tektronix as an output format for
captured streams.
Also does anyone have any expirience in altering streams and
"broadcasting" them to a set-top-box, wiht the Hauppauge or Seimens
cards?
TIA
Mittwoch, 20. März 2002 at 18:30 Ralph Metzler wrote:
> Wolfgang Wershofen writes:
> > today, Rolf Siebrecht confirmed in another thread, that I will not be
> > able to get my TechnoTrend budget card running with 0.8.2-drivers and
> > 2.2.19-Kernel.
> >
> > Before converting back again to
Mittwoch, 20. März 2002 at 15:39 Frank Klingenhoefer wrote:
> Wolfgang Wershofen wrote:
>>
> [...]
[...]
> My suggestions:
> Use the card with 2.4.x/siemens_0.9.y and activate the debug output
> [ "insmod xyz debug=1" ; wathever "modinfo -p xyz" helps].
> You will find in the logs informatio
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
>
> tuxzap only needs the PIDs and the transponder information (not
> including FEC which can be set to auto). tuxzap can also read the list
> produced for the Nokia MM9800 which you can find on lyngsat.com.
> It can also read the xml output of dvbtun
Wolfgang Wershofen wrote:
>
[...]
> Ok, I downloaded the 0.7.91-version of bttv. But how do I find out,
> which type of tuner my TT budget card has? Do I have to look at the
> card itself or is there a way to let some software show me that?
>
> > The tuner (in the dvb package) is a slightly (?)
Hi everybody,
today, Rolf Siebrecht confirmed in another thread, that I will not be
able to get my TechnoTrend budget card running with 0.8.2-drivers and
2.2.19-Kernel.
Before converting back again to the actual kernel and drivers, I'd like
to ask, if anybody has successfully managed to get IP-N
Mittwoch, 20. März 2002 at 15:48 Rolf Siebrecht wrote:
> The DVB-0.8.2-package only supports the Alps BSRV2 tuner with VES1893
> demodulator (regarding DVB-*S*). Your budget card probably has a Alps
> BSRU6 with STV0299 demodulator - no success with DVB-0.8.2.
> As said dvb.o detects the curr
Ingo Krabbe writes:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Hi,
>
> when I create my own dvbrc for tuxzap I need the values for APID and VPID. I
> recently found that information but in this list I found the FEC misses. It
> isn't very understandable for a user why tuxzap
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
when I create my own dvbrc for tuxzap I need the values for APID and VPID. I
recently found that information but in this list I found the FEC misses. It
isn't very understandable for a user why tuxzap seems to need more
information than other
Hi!
On Wed, 20 Mar 2002, Wolfgang Wershofen wrote:
> Dienstag, 19. März 2002 at 23:17 Frank Klingenhoefer wrote:
> > Wolfgang Wershofen wrote:
> >> Does anybody know, how to set the tuner type? I looked into the
> >> archives and found only one thread with this message but no solution
> >> to tha
> > The result is the same if I grab cvbs off J2. I haven't tried y/c or
rgb, but
> > i'm not sure if my tv likes those signals. Does anyone have the same
experience
> > or maybe even succesfully whipped out a soldering iron to corrects this?
>
> The S-Video output of my card produces wrong signal
On Wed, Mar 20, 2002 at 02:07:31AM -0800, Ruurd A. Reitsma wrote:
> Hi,
>
> two days after connecting my dvb-s to a different tv set than the one I used
> before (using the cvbs connector) , the signal was suddenly gone. Only a very
> weak black/white picture remains, completely out of sync. I su
Dienstag, 19. März 2002 at 23:17 Frank Klingenhoefer wrote:
> Wolfgang Wershofen wrote:
> [...]
>> Does anybody know, how to set the tuner type? I looked into the
>> archives and found only one thread with this message but no solution
>> to that.
> $ insmod tuner type=xyz
> (This parameter of
Hello!
Am Mittwoch, 20. März 2002 11:07 schrieb Ruurd A. Reitsma:
> The result is the same if I grab cvbs off J2. I haven't tried y/c or rgb,
> but i'm not sure if my tv likes those signals. Does anyone have the same
> experience or maybe even succesfully whipped out a soldering iron to
> correc
On Tue, 2002-03-19 at 23:06, Gerhard Steiner wrote:
> Hello,
>
> I heard, that I have to change the parameter QAM for UPC
> vienna from QAM_64 to QAM_256 to use it with a DVB-c card.
> How can I find out if this is correct?
> Where to get the correct value from? Is there any program
> where I ca
Hi,
two days after connecting my dvb-s to a different tv set than the one I used
before (using the cvbs connector) , the signal was suddenly gone. Only a very
weak black/white picture remains, completely out of sync. I suspect some sort
of grounding problem blew some circuits on the dvb-s card. T
Hello,
I heard, that I have to change the parameter QAM for UPC
vienna from QAM_64 to QAM_256 to use it with a DVB-c card.
How can I find out if this is correct?
Where to get the correct value from? Is there any program
where I can get it from?
And where do I have to change this value? In the dr
21 matches
Mail list logo
