Hi,
I have a Twinhan Magic Box (7041B/M) and want to look TV on Ubuntu 6.06 (Linux
version 2.6.15-27) with it. I have downloaded the firmware
dvb-usb-dibusb-5.0.0.11.fw from www.linuxtv.org. In xine I can see the video,
but I can't hear the sound. Other sound files works properly. What can I
Hi,
I've got one of the above cards (cx2388x and I think an mt352 frontend);
works perfectly in 2.6.16.18, will not
tune anything in with 2.6.18. I've noticed at least one or two other
complaints on the list but not seen a patch to fix it (other than
pulling tip-of-tree and compiling that). Any
Hi,
I am having problems getting the DVB-T300 to switch to analogue mode
once the digital part of the tuner has been accessed. The only way I
found seems to be to unload the saa7134-dvb module and reload saa7134.
I'm using the drivers from vanilla 2.6.18 kernel, but I checked the
relevant
Hi all,
sorry for the long delay, but I was really busy I haven't had any time to
really look into this.
Attached is a patch which should fix the configuration so that it works
for all dib3000mc/p-driven devices.
Sorry again,
Patrick.diff -r 9eb3e11544a7
Hi Guys,
I have been looking into the 'tv_grab_dvb' project, and tried using it
with my Danish Canal Digital subscribtion.
I can find data with the application, but it only contains now/next
listings, which is sort of useless to me. An EPG with a look-ahead around
2 hours!?!
It seems that the
Hi,
On Sunday 01 October 2006 21:16, Roland Mieslinger wrote:
Hi,
when try to build the driver make config enters an endless loop (CPU
usage is high). I've fixed two issus so far:
- v4l/versions.txt: DVB_USB_PCTV452E is missing
Ok, forget to add. DVB_LNBP22 was also missing
-
Indeed!
Well done!
Thanks Patrick.
Tested on a Hauppauge WinTV NOVA T USB2
On 10/1/06, Patrick Boettcher [EMAIL PROTECTED] wrote:
Hi all,
sorry for the long delay, but I was really busy I haven't had any time to
really look into this.
Attached is a patch which should fix the configuration
Hi,
I would like to save the full transport stream of a DVB-T bouquet using gnutv.
Is there a way to achieve it?
So far I need to specify a channel, not a full bouquet.
Regards
Mario
___
linux-dvb mailing list
linux-dvb@linuxtv.org
Could somebody please pick this patch up? Simplicity of the patch
notwithstanding, it fixes a serious bug in the driver which is not at
all hard to encounter (1/32 of the tuning space is affected)
Thanks
-y
Yeasah Pell wrote:
I finally tracked down the cause of the weird mis-tunings I've seen
Hi,
Tomislav Bodor wrote:
Hi,
I am having problems getting the DVB-T300 to switch to analogue mode
once the digital part of the tuner has been accessed. The only way I
found seems to be to unload the saa7134-dvb module and reload saa7134.
I'm using the drivers from vanilla 2.6.18 kernel, but I
Is this card supported yet or is it a brick under linux?
Ref: http://www.linuxtv.org/pipermail/linux-dvb/2005-December/
007078.html
--
Torgeir Veimo
[EMAIL PROTECTED]
___
linux-dvb mailing list
linux-dvb@linuxtv.org
Hi,
Following on from suggestions by Michael Krufky in this list, I've
managed to get this tuner card working (thanks Mike!), almost perfectly.
The only problem now is that the remote isn't working.
The drivers appear to be loading correctly, so that the entries appear
in /proc/bus/input/devices
Hartmut Hackmann wrote:
Hi,
Tomislav Bodor wrote:
Hi,
I am having problems getting the DVB-T300 to switch to analogue mode
once the digital part of the tuner has been accessed. The only way I
found seems to be to unload the saa7134-dvb module and reload saa7134.
I'm using the drivers from
13 matches
Mail list logo