I'm having a few problems with my Nova-T-500s - they seem to (fairly
frequently - at least once a day) cause a kernel OOPS. This seems to be
(most directly) due to a USB disconnect - I've attached the dmesg
output. Any ideas on why this USB disconnect is happening, and should
the drivers be
Hartmut Hackmann wrote:
Hi, all
First: thanks for testing.
To sum up:
Things seem to work, right?
Just some comments:
- The card might have a sensitivity issue. The reason is that there
is an external RF amplifier on the board which is not handled by
the driver yet.
Hartmut, are you
On Fri, Oct 06, 2006, Robert Schlabbach wrote:
Obviously the broadcasters must have released the specifications to at
least some receiver makers for implementation.
Hm, it might be possible that these descriptors are handled
by some MHP application only.
Johannes
Robert Schlabbach wrote:
Hi,
would anyone here know where to find the specifications for some
user-defined descriptor tags? Specifically, I'm looking for the
specifications of:
private_data_specifier 0x0001 (SES):
- 0xA0 (some type of country specification)
- 0xA1 (unknown meaning)
El vie, 06-10-2006 a las 01:15 +0200, Hartmut Hackmann escribió:
Hi, all
First: thanks for testing.
To sum up:
Things seem to work, right?
Just some comments:
- It should not be necessary to set card and tuner type manually.
- If no dvb devices are created, the reason most probably is
Selon Hartmut Hackmann [EMAIL PROTECTED]:
Hi, all
First: thanks for testing.
To sum up:
Things seem to work, right?
Just some comments:
- It should not be necessary to set card and tuner type manually.
- If no dvb devices are created, the reason most probably is that
the
The message before seemed to be messed up, so it is below.
Also, the link in the previous message downloads the ascii text file
that is the patch.
I also included it in the email below.
Cheers
On 10/6/06, Ben Woods [EMAIL PROTECTED] wrote:
Hi there,
I have a Yuan PD300 mini DVB-USB pen. It
Hello everybody,
A thousands of thanks for the choice to deselect obsolete frontend modules for
bt8xx cards in Kernel 2.6.18 and 2.6.19-rc1.
Real pretty good work, but not done consequently enough.
Problems:
When selecting cx24110.c for compiling support for Pinnacle PCTVSAT three
modules are
Applies against: 2.6.19-rc1
Signed-off-by: Uwe Bugla [EMAIL PROTECTED]
--- a/drivers/media/dvb/dvb-core/Kconfig
+++ b/drivers/media/dvb/dvb-core/Kconfig
@@ -19,6 +19,6 @@
allow the card drivers to only load the frontend modules
they require. This saves several KBytes of memory.
Applies against: 2.6.19-rc1
Signed-off-by: Uwe Bugla [EMAIL PROTECTED]
--- a/Documentation/dvb/bt8xx.txt
+++ b/Documentation/dvb/bt8xx.txt
@@ -9,9 +9,15 @@
Please see Documentation/dvb/cards.txt = o Cards based on the Conexant Bt8xx
PCI bridge:
Compiling kernel please enable:
-a.)Device
Uwe Bugla wrote:
Signed-off-by: Uwe Bugla [EMAIL PROTECTED]
- Note: You will need moudule-init-tools v3.2 or later for this feature.
+ Note: You will need module-init-tools = v3.2 for this feature.
Uwe,
Thank you for pointing out this spelling error. I'll fix this in my
tree, but
Original-Nachricht
Datum: Fri, 06 Oct 2006 11:31:24 -0400
Von: Michael Krufky [EMAIL PROTECTED]
An: Uwe Bugla [EMAIL PROTECTED]
Betreff: Re: [linux-dvb] Patch 1 / 2: eliminate a type error in Kconfig
Uwe Bugla wrote:
Signed-off-by: Uwe Bugla [EMAIL PROTECTED]
- Note:
Hi All,
I have uploaded a preview for the Mantis based cards (VP-1027 / VP-1033
/ VP-1034 / VP-2033 / VP-3033)
The update contains a new PCI bridge called the Mantis and 2 frontends
as well
The MB86A16 is a Direct Conversion DVB-S / DSS receiver, which requires
no external components, for
Hartmut Hackmann ha scritto:
Hi, all
First: thanks for testing.
To sum up:
Things seem to work, right?
Just some comments:
- It should not be necessary to set card and tuner type manually.
- If no dvb devices are created, the reason most probably is that
the saa7134-dvb module is not loaded.
On Sun, Oct 01, 2006 at 01:01:52AM +0200, you [hermann pitton] wrote:
To avoid using radio first in order to get the FM/RF input active for
DVB-T, you could either use the cable-tv antenna input for it or apply
the patch I previously linked to.
After that patch the ability to use the
From: Johannes Stezenbach [EMAIL PROTECTED]
On Fri, Oct 06, 2006, Robert Schlabbach wrote:
Obviously the broadcasters must have released the specifications to at
least some receiver makers for implementation.
Hm, it might be possible that these descriptors are handled
by some MHP
On Fri, 6 Oct 2006, Robin Hill wrote:
I'm having a few problems with my Nova-T-500s - they seem to (fairly
frequently - at least once a day) cause a kernel OOPS. This seems to be
(most directly) due to a USB disconnect - I've attached the dmesg
output. Any ideas on why this USB disconnect
El Viernes, 6 de Octubre de 2006 22:48, Patrick Boettcher escribió:
On Fri, 6 Oct 2006, Robin Hill wrote:
I'm having a few problems with my Nova-T-500s - they seem to (fairly
frequently - at least once a day) cause a kernel OOPS. This seems to be
(most directly) due to a USB disconnect -
On Friday 06 October 2006 22:48, Patrick Boettcher wrote:
On Fri, 6 Oct 2006, Robin Hill wrote:
I'm having a few problems with my Nova-T-500s - they seem to
(fairly frequently - at least once a day) cause a kernel OOPS.
This seems to be (most directly) due to a USB disconnect - I've
Hi,
Emilio Castellano wrote:
Hartmut Hackmann wrote:
Hi, all
First: thanks for testing.
To sum up:
Things seem to work, right?
Just some comments:
- The card might have a sensitivity issue. The reason is that there
is an external RF amplifier on the board which is not handled by
the
Hi,
KevinLuX wrote:
Hartmut Hackmann ha scritto:
Hi, all
First: thanks for testing.
To sum up:
Things seem to work, right?
Just some comments:
- It should not be necessary to set card and tuner type manually.
- If no dvb devices are created, the reason most probably is that
the
Hi,
[EMAIL PROTECTED] wrote:
On Sun, Oct 01, 2006 at 01:01:52AM +0200, you [hermann pitton] wrote:
To avoid using radio first in order to get the FM/RF input active for
DVB-T, you could either use the cable-tv antenna input for it or apply
the patch I previously linked to.
After that patch
Hi!
Is there no interest in supporting this device?? Or is there nobody out
there who could tell me something about driver state? Is it in
development or will it never be supported under linux?
It is a USB2.0 DVB-S device from TechnoTrend
Output of lsusb -v:
Bus 001 Device 002: ID 0b48:3006
Hi,
Am Freitag, den 06.10.2006, 23:40 +0200 schrieb Hartmut Hackmann:
Hi,
[EMAIL PROTECTED] wrote:
On Sun, Oct 01, 2006 at 01:01:52AM +0200, you [hermann pitton] wrote:
To avoid using radio first in order to get the FM/RF input active for
DVB-T, you could either use the cable-tv
Can anyone help with this? Still having no success in getting the remote control to work with the DViCO dual digital 2. The tuners work fine, and mythtv is working with the keyboard. I had installed the drivers at the start of the month, just after Michael created a patch. The box is running
25 matches
Mail list logo