Hi Matthieu,
Can you please try if the autosearch now works correctly? I tried, for me
it was OK.
Thanks,
Patrick.
On Tue, 15 Aug 2006, matthieu castet wrote:
matthieu castet wrote:
Hi,
If I try to scan some transponders with the initial file [1] and the scan
utility from dvb-apps
I have recently (re-) added support for the IR remote on the MSI
[EMAIL PROTECTED] Plus analog TV card. My patches were heavily based on the
original work by Henry Wong, detailed in this post:
http://marc.theaimsgroup.com/?l=linux-videom=113435030232464w=2
Note: I have verified the odd behavior
One project I have considered taking on after looking over the v4l-dvb
source is an addition to the ioctl interface that would allow one (from
[su]ser space) to read and modify the GPIO registers on
cards/controllers that have them (such as the bt8xx and saa713x
devices). If such an interface
Andrew Waldram wrote:
On Thu, 2006-10-19 at 17:04 -0400, Michael Krufky wrote:
The problem is not in the megasky m920x / gl861 driver itself --
rather,
the qt1010 code is not complete. There are some pending patches on
the
linux-dvb list that you should feel welcome to try. I have not
the offset for australia appears to be +- 125khz
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Hello,
I would like to know if femon gives good values for signal strength and
SNR for SkyStar 1 CI card.
I get these values form femon:
FE: DST DVB-S (DVBS)
Problem retrieving frontend information: Operation not supported
status SCVYL | signal 3a00 | snr 1b43 | ber | unc b7f44508
I've recently come back to the MSI Megasky stick, having been busy at work
for a while and am delighted with the progress which has been made!
I've used the code from the megasky tree, and now have a fully functional
digital tuner.
Thankyou very much!
Rob Bacon
On Oct 19 2006, Michael
Hi,
I own this card and I am unable to get it working under linux. I have
posted much info here:
http://forums.gentoo.org/viewtopic-p-3659011.html#3659011(I hope it is
okay not to post everything here again).
There you can look at dmesg, lspci etc output and what does/does not
work. If you need
I demand that Steve Brokenshire may or may not have written...
(Before I start, I'm running linuxtv-dvb-apps 1.1.1 with Linux kernel
2.6.17.11 on Debian 3.1, using a Freecom DVB-T USB stick and a Hauppauge
PVR-350 card with VDR 1.3.41. [...]
The problem I'm having with is that the scan
Hi
[EMAIL PROTECTED] wrote:
Hi,
I own this card and I am unable to get it working under linux. I have
posted much info here:
http://forums.gentoo.org/viewtopic-p-3659011.html#3659011(I hope it is
okay not to post everything here again).
There you can look at dmesg, lspci etc output and what
Hi,
Patrick Boettcher wrote:
Hi Matthieu,
Can you please try if the autosearch now works correctly? I tried, for me
it was OK.
No, it doesn't seem to work : I tried with
http://linuxtv.org/hg/~pb/v4l-dvb?cmd=manifest;manifest=dc6e4276ece1;path=/;style=gitweb
.
Then in VDR I changed
I have a question about using this device with mplayer. I set up a
channels.conf file manually using information extracted from tsbrowser on a
working Windows install. If I play a QAM channel with 2.0 sound, it works
fine. If I play a QAM channel with 5.1 sound, I get no sound whatsoever.
Matthias Dahl wrote:
On Saturday 14 October 2006 16:27, Matthias Dahl wrote:
I own a KNC ONE DVB Plus with a Cineview module (Alphacrypt Light). From
the beginning I ran into data corruption problems with the mpeg stream as
soon as I made the usual X - VT switch or put some load on the
Daniel Heemann wrote:
the same was already submitted some months/years ago for kernel-2.4, now
when trying to get the card running using kernel-2.6 I found the hardware
no longer supported.
It runs with the attached patch w/o any problems (based on last nights 'hg
clone snapshot'), at
David Härdeman wrote:
This series of patches includes a number of bugfixes and changes to the
IR input handling of the budget-ci driver.
They are based on the dvb-ir patchset by Darren Salt and the two budget-ci
patches that I recently sent to the list (meaning that they supercede
patches 1
[EMAIL PROTECTED] wrote:
I'm working with a TT Budget card under Linux (Kernel 2.6/Suse10.1).
There are many different versions of TTBudget/Nova cards.
Please post the subsystem id of the card ('lspci -vn' output) and
log messages when the driver is being loaded.
With this system I can not
16 matches
Mail list logo
