lwtbenben wrote:
> Hi,everyone
> I have a Dvico FusionHDTV5 USB Gold card at hand, is there any guide to
> set up the card?
> Thank you very much.
This device is well supported in kernel versions 2.6.16 and later.
You'll need the firmware, located at:
http://linuxtv.org/downloads/firmw
Unfortunately I am unable to continue working on the T750. I have given
the card to a windows user who can make some use of it.
If anyone else wants to work on it I am happy to pass on the information
I have collected.
John.
___
linux-dvb mailing lis
Hi
From you /var/log/messages, you may need a firmware in its place.
Please go to the Documentation/dvb to find the get_dvb_firmware,
vi it and see which firmware do you need to download.
Download it and copy it to /lib/firmware,
Then you can enjoy your candy.
Best regards.
Am Donnerstag, den 19.07.2007, 10:28 +0900 schrieb timecop:
> Perhaps an extra servings of dongs?
But what about the sores then?
>
> -tc
>
> On 7/19/07, hermann pitton <[EMAIL PROTECTED]> wrote:
> > Am Donnerstag, den 19.07.2007, 09:34 +0900 schrieb timecop:
> > > diff -urN oldfile.c newfile.c
Dear all:
As we know, under Linux OS, USB devices and drivers are matched with four
different method:
USB_DEVICE_ID_MATCH_DEVICE;
USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION;
USB_DEVICE_ID_MATCH_DEV_INFO;
USB_DEVICE_ID_MATCH_INT_INFO;
But I have a problem now, my USB device have
Hi,everyone
I have a Dvico FusionHDTV5 USB Gold card at hand, is there any guide to set
up the card?
Thank you very much.
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Perhaps an extra servings of dongs?
-tc
On 7/19/07, hermann pitton <[EMAIL PROTECTED]> wrote:
> Am Donnerstag, den 19.07.2007, 09:34 +0900 schrieb timecop:
> > diff -urN oldfile.c newfile.c > lolwat.diff
>
> What do you recommend should be in this .diff ?
>
>
>
> _
Am Donnerstag, den 19.07.2007, 09:34 +0900 schrieb timecop:
> diff -urN oldfile.c newfile.c > lolwat.diff
What do you recommend should be in this .diff ?
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/
On 6/13/07, Antti Palosaari <[EMAIL PROTECTED]> wrote:
> heissan!
> Can you try attached patch and report?
> This patch is a little bit unready due to changes needed to zl10353
> demodulator driver. I have no knowledge what are registers 0x8e and
> 0x90-0x96 (please help) but I have strong feeling
diff -urN oldfile.c newfile.c > lolwat.diff
On 7/19/07, P. van Gaans <[EMAIL PROTECTED]> wrote:
> Uwe Bugla wrote:
> > Am Mittwoch, 18. Juli 2007 06:03:41 schrieb P. van Gaans:
> >> I don't call myself a programmer (I've never seen any C guide), but
> >> somehow I figured out how to add an extra
Uwe Bugla wrote:
> Am Mittwoch, 18. Juli 2007 06:03:41 schrieb P. van Gaans:
>> I don't call myself a programmer (I've never seen any C guide), but
>> somehow I figured out how to add an extra switch to tzap to make it
>> print the status in (human-readable) decimal instead of hex. It is
>> attache
On 7/19/07, Erich Newell <[EMAIL PROTECTED]> wrote:
> I am very happy you inquired. I had planned on using the device with
> clear DVB-S2 transmissions on Echostar1. However, after your inquiry I
> thought I might double check my facts.
>
> In the end I discovered that although the streams are othe
On 7/19/07, Erich Newell <[EMAIL PROTECTED]> wrote:
> I am very happy you inquired. I had planned on using the device with
> clear DVB-S2 transmissions on Echostar1. However, after your inquiry I
> thought I might double check my facts.
>
> In the end I discovered that although the streams are othe
I am very happy you inquired. I had planned on using the device with
clear DVB-S2 transmissions on Echostar1. However, after your inquiry I
thought I might double check my facts.
In the end I discovered that although the streams are otherwise the
same as DVB-S2 HD streams in Europe, here they use
I wonder what you plan to do with that card in "western US" as there
are no -S2 transmissions.
-tc
On 7/19/07, Erich Newell <[EMAIL PROTECTED]> wrote:
> I have decided to take the plunge and ordered one of these units. It
> is being shipped via post from Germany to the Western USA so I expect
> i
I have decided to take the plunge and ordered one of these units. It
is being shipped via post from Germany to the Western USA so I expect
it will take some time. I will post again once it arrives.
If need be, I'd be perfectly willing to open the unit and read numbers
off of chips etc.
--
"A ma
Hello,
I bought a lifeview TV Walker Swift SE.
Model LR538LR-U-R
I can see a Philips 8278AC1 inside.
It seems that I can load a driver, but then
when using "scan" utility it seems that no driver
is "bound" to /dev/dvb/adapter0/frontend0
Could anyone help me?
If I can do anything to help anyone t
Yes, the card worked before in the older machine - and
I still can switch from the new to the old machine and
see it working again... (Just plugging the HD to the old
machine without rebuilding anything...)
> [ 09 00 04 d4 01 00 6b 6c 40 07 ]
> This command failed
which command is that??
BTW. I
On 7/18/07, Manuel Kampert <[EMAIL PROTECTED]> wrote:
> Hi!
>
> Nice to know that I am not the only one in the world having such issues
> :-)
>
> In the meantime I have done some logging to track the problem down.
> Logging for DST.C is enabled via:
>
> modprobe dst verbose=4
>
> I have als
Am Mittwoch, 18. Juli 2007 17:21:07 schrieben Sie:
> Le mercredi 18 juillet 2007 16:13, Uwe Bugla a écrit :
> > 2. Kaffeine's channel lists should not be sorted by a couple of numbers
> > that absolutely do not make any sense.
> > The sorting should be alphabetically in the first place, then using
On 7/18/07, Zoilo Gomez <[EMAIL PROTECTED]> wrote:
>
> I had found similar issues using Twinhan 1034 DVB-S some time ago ...
> (see 1 May email archive).
>
VP-1034 uses the MB86A16 DC receiver (mb86a16.ko) Unfortunately others
had no DiSEqC issues, ie the issue was not reproduceable.
VP-1030 use
Am Mittwoch, 18. Juli 2007 19:20:13 schrieben Sie:
> Am Mittwoch, 18. Juli 2007 17:21:07 schrieben Sie:
> > Le mercredi 18 juillet 2007 16:13, Uwe Bugla a écrit :
> > > 2. Kaffeine's channel lists should not be sorted by a couple of numbers
> > > that absolutely do not make any sense.
> > > The sor
On 7/18/07, Artem Makhutov <[EMAIL PROTECTED]> wrote:
> Hi,
>
> On Tue, Jul 17, 2007 at 02:07:13PM +0400, Manu Abraham wrote:
> > On 7/17/07, Erich Newell <[EMAIL PROTECTED]> wrote:
> > > Manu, or anyone who can help...Will this card work with the current
> > > HDTV drivers? I am unfamiliar with wh
Manuel Kampert wrote:
> Hi!
>
> Nice to know that I am not the only one in the world having such issues
> :-)
>
> In the meantime I have done some logging to track the problem down.
> Logging for DST.C is enabled via:
>
> modprobe dst verbose=4
>
> I have also enabled i2c debugging in the ker
Le mercredi 18 juillet 2007 16:13, Uwe Bugla a écrit :
> 2. Kaffeine's channel lists should not be sorted by a couple of numbers
> that absolutely do not make any sense.
> The sorting should be alphabetically in the first place, then using
> numbers. In a kaffeine channel list it's quite horrible t
Hmm... and before I forget...
I can recover from the problem by removing and replugging the SAT cable
from
the card. An reboot however will not help, only power-off power-on. This
is
why I assume some DISEQC related...
-Original Message-
From: Remy Bohmer [mailto:[EMAIL PROTECTED]
Sen
Hi!
Nice to know that I am not the only one in the world having such issues
:-)
In the meantime I have done some logging to track the problem down.
Logging for DST.C is enabled via:
modprobe dst verbose=4
I have also enabled i2c debugging in the kernel.
Here are the relevant Parts of t
Am Mittwoch, 18. Juli 2007 16:11:12 schrieben Sie:
> Am Mittwoch, 18. Juli 2007 15:18:51 schrieben Sie:
> > Am Mittwoch, 18. Juli 2007 11:44 schrieb Uwe Bugla:
> >
> >
> > > - equally for tzap, czap, szap and femon?
> >
> > You should first check whether somebody intends to pick it up ...
>
> If t
Am Mittwoch, 18. Juli 2007 11:44 schrieb Uwe Bugla:
> - equally for tzap, czap, szap and femon?
You should first check whether somebody intends to pick it up ...
Christoph
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-b
Le mercredi 18 juillet 2007 11:44, Uwe Bugla a écrit :
> My idea for further enlargement (a quite old idea of mine):
> route the human readable numbers into a speech recognition engine
> (festival) to make them auditable and thus real usable for DVB-S dish
> tuning f. ex.
>
> Note: If the DVB-S dis
On Wed, 18 Jul 2007, Luca Olivetti wrote:
> En/na P. van Gaans ha escrit:
> > Talking about that, could anybody tell me the minimal and maximal and/or
> > possible values for status, signal, snr, ber and uncorrected? If I would
> > know them I could try to make the numbers more human-readable (eg s
Hi,
On Tue, Jul 17, 2007 at 02:07:13PM +0400, Manu Abraham wrote:
> On 7/17/07, Erich Newell <[EMAIL PROTECTED]> wrote:
> > Manu, or anyone who can help...Will this card work with the current
> > HDTV drivers? I am unfamiliar with whatever complications there might
> > be with a USB device.
> >
>
Am Mittwoch, 18. Juli 2007 06:03:41 schrieb P. van Gaans:
> I don't call myself a programmer (I've never seen any C guide), but
> somehow I figured out how to add an extra switch to tzap to make it
> print the status in (human-readable) decimal instead of hex. It is
> attached. It would be really n
I add service type based on EN 300 468 V1.7.1(2005-12)
Binary files source_org/dvb-apps/.hg/dirstate and source/dvb-apps/.hg/dirstate differ
diff -urN source_org/dvb-apps/lib/libucsi/dvb/service_descriptor.h source/dvb-apps/lib/libucsi/dvb/service_descriptor.h
--- source_org/dvb-apps/lib/libucsi
34 matches
Mail list logo
