-- Missatge reenviat --
From: Harald Gustafsson [EMAIL PROTECTED]
To: linux-dvb@linuxtv.org
Date: Wed, 15 Aug 2007 23:00:07 +0200
Subject: [linux-dvb] NOVA-T 500 PCI power-off problem fix
Hi,
I noticed that on my motherboard (Abit iL-90 MV) using the latest (tested
using
I use the same Lirc files (albeit modified slightly to map the bottom
two rows to digital text) and it does work - irw shows the correct key
presses and mythtv can be controlled by remote - but only from
ridiculously close to the receiver (even with new batteries ;)) Makes me
think it's
I should clarify that the whole shutdown process is done, but then it hanged
with a black screen instead of powering off.
Harald
Mmmh... Last night my MythTV box didn't properly shutdown after finishing
its recording encoding tasks. I made sure I had left it unlocked through
mythwelcome menu
I'm using the mt2131 reliably (paired with the s5h1409 demod) for ATSC
on a number of different boards, it's working fine for me. Which product
are you using and what's the demod on the board?
Have you tried a different product to see if you have environmental
problems?
I tested the
On Thu, 2007-08-16 at 10:09 +0200, Harald Gustafsson wrote:
I should clarify that the whole shutdown process is done, but then it
hanged with a black screen instead of powering off.
This may be completely unrelated to DVB.
Check this bug:
hi all,
I work on an embedded device and I xwould like to integrate a Freecom
DVD-T TNT USB Stick (25451) card on my device.
The problem is that the USB driver on my device neither supports USB2.0
and Isochronous transfers.
I've seen that the Freecom dvb-t USB driver works with bulk and USB 1.1.
On 8/16/07, Torgeir Veimo [EMAIL PROTECTED] wrote:
On Thu, 2007-08-16 at 07:39 +0100, Andy Morton wrote:
se the same Lirc files (albeit modified slightly to map the bottom
two rows to digital text) and it does work - irw shows the correct
key
presses and mythtv can be controlled by
ok,
but I can't find any reseller for this device.
also, what is PID Filtering used to ?
I've seen in the Freecom source code that DVB_USB_ADAP_HAS_PID_FILTER is
used.
Does that mean that the device suport USB1.1 ?
Also on this link (
http://www.linuxtv.org/wiki/index.php/DVB-T_USB_Devices ),
Simon Lundell wrote:
On 8/16/07, *Torgeir Veimo* [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] wrote:
On Thu, 2007-08-16 at 07:39 +0100, Andy Morton wrote:
se the same Lirc files (albeit modified slightly to map the bottom
two rows to digital text) and it does work - irw shows
Am Donnerstag 09 August 2007 20:34 schrieb Oliver Endriss:
Well, that's not surprising.
If you set uselocks=1, ttpci_budget_debiread/write must not sleep,
i.e. you have to set nobusyloop=0. Does it work now?
Nevertheless I don't like busy looping with interrupts disabled.
AFAICS the
Hello,
I'm willing to buy a DVB-s card. I have a dual DVB-t card (nova t-500) and
I'm quite happy being dual, therefore I'd like a dual DVB-s card.
I have done some research but I haven't found any information on
linuxtv.org, this mailing list or any linux related site. I haven't found
any
On Tue, 14 Aug 2007 16:31:33 +0200
Markus Rechberger [EMAIL PROTECTED] wrote:
Following patch adds the possibility to implement tuner drivers in
userspace.
(...)
This work can immediatelly be reused with ivtv [2], saa7134, cx88,
em28xx [3] and cxusb drivers and add support for
I attached to this e-mail the dvbscan config file for the DVB-T channels of
Citycable the cable network of Lausanne Switzerland.
ch-Lausanne-Citycable
Description: Binary data
___
linux-dvb mailing list
linux-dvb@linuxtv.org
Yes you are right it might not be related to DVB, I read a lot of bug and
forum posts that reported power off problems and tried their solutions but
without success. At last I did a clean install and did shutdown tests at
each step to find the problem, and when upgraded to the latest DVB drivers
On Thu, 2007-08-16 at 12:39 -0300, Dâniel Fraga wrote:
I think this is a wonderful idea and I can't wait to see it
merged in the official kernel.
i have not seen anything which would suggest that this is going into the kernel
anytime soon.
i don't know who is right but there appear to
On 8/16/07, Simon Kenyon [EMAIL PROTECTED] wrote:
On Thu, 2007-08-16 at 12:39 -0300, Dâniel Fraga wrote:
I think this is a wonderful idea and I can't wait to see it
merged in the official kernel.
i have not seen anything which would suggest that this is going into the
kernel anytime
Marko Ristola wrote:
I did for the Mantis branch a working solution for mem and disk cases.
I haven't tested standby yet, but I think that it should be easy to
extend if it doesn't work yet.
I used linux/Documentation/power/*.txt while
trying to understand how to implement suspend/resume.
Julian Scheel wrote:
Am Donnerstag 16 August 2007 13:12 schrieb Julian Scheel:
Am Donnerstag 09 August 2007 20:34 schrieb Oliver Endriss:
Well, that's not surprising.
If you set uselocks=1, ttpci_budget_debiread/write must not sleep,
i.e. you have to set nobusyloop=0. Does it work now?
Jukka Pirinen wrote:
As workaround I commented out initialisation of CI interface, that's not
a problem because I don't have CI.
diff budget-av.c.orig budget-av.c
1175c1175
ciintf_init(budget_av);
---
//ciintf_init(budget_av);
Could you please try to find out, why the CI
Johannes Deisenhofer wrote:
Hi,
I have a bunch of KNC1 DVB-S Plus Cards, with Subsystem ID 1894:0015.
There are 'Plus' cards, with Phillips SD1878 Tuner and Analog Inputs.
(Picture at http://www.vdr-wiki.de/wiki/index.php/Bild:Knc1splusx4.jpg)
Is 'KNC1 DVB-S plus X4' the correct name of
Steven Toth wrote:
Steven Toth wrote:
Markus Rechberger wrote:
On 8/9/07, Steven Toth [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On 8/9/07, Steven Toth [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On Thu, 16 Aug 2007 21:46:14 +0100
Simon Kenyon [EMAIL PROTECTED] wrote:
i have not seen anything which would suggest that this is going into
the kernel anytime soon. i don't know who is right but there appear
to be serious differences of opinion between the developers as to how
to proceed.
Markus Rechberger wrote:
Since this didn't get commented here, Trent did that patch already 2
months ago but it's not included yet. So I recommend to include his
patch.
http://article.gmane.org/gmane.linux.kernel/543689
Acked-by: Markus Rechberger [EMAIL PROTECTED]
Are you talking about
23 matches
Mail list logo
