Hi Patrick,
Em Dom, 2007-08-26 às 18:27 +0200, Patrick Boettcher escreveu:
> Obviously you are from Brasil. What is your current status in your country
> about DTV?
As Carlos said, the commercial transmissions start at the end of this
year.
> How much did they modified Japan's ISDB-T implement
Sorry for a late response. I was in transit to participate at Linux Conf
Europe/2007, where I should give a speech about multimidia support on
Linux kernel on this Sunday.
The API seems ok to me. I've added it to v4l-dvb tree.
Guys,
Please test if everything remains correct. Although the patchse
I found this thread in the archives and I am having a similar problem.
I am looking at an IP/DVB datastream at PID 0x1fa3. It is using a
table ID of 63 which if I am reading the standard correctly is a
reserved table ID. dvbsnoop sees this table and it looks fine
although it makes no attempt
Hello All,
Several weeks ago we had a discussion on the linux-dvb mailinglist
about the Twinhan vp1030c clone cards and problems with Diseqc
switches which failed to switch between several LNBs. The conclusion
was that there was a lot of noise on the cable, more noise than
control signal for the S
Andrew Burgess wrote:
> kernel: 2.6.22-rt9
>
> I had to rmmod the dvb stuff, load lgdt330x manually, then reload dvb
> Then everything was fine
Some more detail would be better... what do you mean, "reload dvb" ? Please
show us exactly what commands you ran.
> I've booted 2.6.22 before withou
kernel: 2.6.22-rt9
I had to rmmod the dvb stuff, load lgdt330x manually, then reload dvb
Then everything was fine
I've booted 2.6.22 before without this problem, maybe it was different
because the dvico was warm, usually I power cycle everything
Hope this is the correct list
Andrew
Sep 1 07:47
Richard and Monica Bland wrote:
> All,
>
> I've started trying to get the above working and have hit a wall (not
> literally).
>
> My current setup has a Nova-T and a WinTV34xx installed and working with
> the S2 being a new addition.
>
> I have downloaded and compiled and installed the drivers fro
All,
I've started trying to get the above working and have hit a wall (not
literally).
My current setup has a Nova-T and a WinTV34xx installed and working with
the S2 being a new addition.
I have downloaded and compiled and installed the drivers from here:
http://linuxtv.org/hg/~stoth/hvr4000/
> BER, I think I understand this, Bit Error Rate means errors in the signal that
> could not be interpreted by the receiver. Should be as low as possible.
Yep. Bit Error Rate is the uncorrectable error rate AFTER decoding the
incoming stream. In other words it's the error rate of the transport
stre
Maillist wrote:
>>> Joacim wrote:
I executed dvbsnoop (with -s singal) during a scan and when finding
channels
I
got:
Sig: ~46000
SNR: 0 (?)
BER: 0
Can I trust the values from dvbsnoop?? Any better tool??
>>> I use femon from the dvb-tools package (
Hi,
since Artem's page seems to be down at this moment, I'm looking for someone
able to send me this patch via email, FTP, etc.
Thanks in advance,
Roman
On Sat, Jul 28, 2007 at 01:53:52AM +0200, Artem Makhutov wrote:
> Hi,
>
> based on Manus and Laasas source I have created a patch file for th
11 matches
Mail list logo