Hi,
I am looking for someone that can receive Atlantic Bird 3 (5° W), and
that has a DVB-S2 card.
If you can, please could you try to tune the transponder KC5 (11139.00
V) 8PSK SR:26707 FEC 7/8 , then record 10 or 20 seconds of full stream
and put it on a FTP site ?
Thanks,
Jean-Claude
__
On Tue, 2008-01-08 at 23:20 +0100, Patrick Boettcher wrote:
> Aah, yes, you're right. It only affects dual-boards and there only the
> streaming problems, which might cause the disconnects.
>
> Your problem was signal reception?
Well my problem is random disconnects on all single tuner dongles I
Oliver Bardenheier (obardenh) schrieb:
> I have a strange behaviour since a few days on my VDR
>
> I have a 9/8 Multiswitch with two VDRs and a Humax PR-1000HD connected.
>
> When I switch on the Humax I don't get the frontend synched on the VDR
> with a NOVA-S-Plus (mercurial tree)
>
> ProSi
Jonatan Wiik wrote:
> Hi,
>
> Does anyone happen to have any information on the DVB-C PCI-card called
> "Cinergy C" by Terratec (
> http://tven.terratec.net/modules.php?op=modload&name=News&file=article&sid=267).
> It seems like it is meant to replace the Cinergy 1200 DVB-C card, but
> I
> wasn't
Hi!
I have patched MythTV with the patch mentioned below, but when I'm
trying to scan for channels I get no DVB-S2 channels? The first times
I've tried to scan I got the channels at Thor 1.0W Transponder 11434V
all time, regardless of what frequency I've enterad in mythtv-setup. But
now I can'
Aah, yes, you're right. It only affects dual-boards and there only the
streaming problems, which might cause the disconnects.
Your problem was signal reception?
Patrick.
--
Mail: [EMAIL PROTECTED]
WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/
On Tue, 8 Jan 2008, Soeren Moch wrote:
> Pa
Hi,
most distributions use separate kernel output directories to be
able to build several kernels from the same source tree.
Building the multiproto tree in such an environment fails either
as .config is not found or some kernel source files are not found
(i. e. compiler.h).
The attached patch t
Hi,
Does anyone happen to have any information on the DVB-C PCI-card called
"Cinergy C" by Terratec (
http://tven.terratec.net/modules.php?op=modload&name=News&file=article&sid=267).
It seems like it is meant to replace the Cinergy 1200 DVB-C card, but
I
wasn't able to find any information about i
Matthew Bloch <[EMAIL PROTECTED]> writes:
> The MAC reported doesn't match what's on the box, though is slightly
> different on each architecture. I've tried with 2.6.22-3-amd64,
> 2.6.22-12-powerpc and 2.6.24-i386 (I think) from the latest Ubuntu/hardy
> release. On each one I've tried compi
This is what the log shows:
Jan 8 20:03:35 Tydirium vdr: [4018] switching to channel 7
Jan 8 20:03:35 Tydirium vdr: [5750] transfer thread ended (pid=4018,
tid=5750)
Jan 8 20:03:36 Tydirium vdr: [4018] buffer stats: 56588 (2%) used
Jan 8 20:03:36 Tydirium vdr: [4018] [core.pids] 0: now tuned t
Patrick Boettcher wrote:
> It affects all dib0700-based devices.
>
> Patrick.
>
I hoped this patch would solve my Nova-T-Stick problems, but - when
looking
closer - this patch changes nothing for single-channel dib0700-based
devices (like the Nova-T-Stick), or have I missed the point?
In othe
On Fri, Jan 04, 2008 at 05:07:00PM +0100, Josef Wolf wrote:
> I have some troubles to scan the satellites for available channels.
> I have 3 LNB's connected via a diseqc switch The positions are:
>
> diseqc-pos 0: astra-e19.2
> diseqc-pos 1: hotbird-e13.0
> diseqc-pos 2: sirius-e5.0
>
> I hav
I have a strange behaviour since a few days on my VDR
I have a 9/8 Multiswitch with two VDRs and a Humax PR-1000HD connected.
When I switch on the Humax I don't get the frontend synched on the VDR
with a NOVA-S-Plus (mercurial tree)
ProSieben;ProSiebenSat.1:12545:hC56:S19.2E:22000:511:512=deu;5
Hi
I am working on the sharp demodulator with stv0299b and ix2476 pll. I heve
the stv0299 driver but i don't have any driver and information(datasheet or
application note)about ix2476 thus i cannot set the pll frequency. howcani find
the driver or datasheet for this pll.
Thanks in Advance.
It affects all dib0700-based devices.
Patrick.
On Tue, 8 Jan 2008, Henrik Beckman wrote:
> Would that patch also affect the nova-td stick, I have had issues with both.
> My problems are isolated to one channel, as long as I don´t record on that
> specific channel everything is solid.
> Receptio
Would that patch also affect the nova-td stick, I have had issues with both.
My problems are isolated to one channel, as long as I don´t record on that
specific channel everything is solid.
Reception on the problem channel is worse, if it´s any help to anyone just
specify what tests you need and I
>
> -- Missatge reenviat --
> From: Patrick Boettcher <[EMAIL PROTECTED]>
> To: Nicolas Will <[EMAIL PROTECTED]>
> Date: Tue, 8 Jan 2008 10:29:48 +0100 (CET)
> Subject: Re: [linux-dvb] WinTV-NOVA-T-500 Status
> Hi all,
>
> The new year starts well, maybe: We found something which wa
[EMAIL PROTECTED] wrote:
> Send linux-dvb mailing list submissions to
> linux-dvb@linuxtv.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> or, via email, send a message with subject or body 'help' to
>
Hi Patrick,
On 08/01/2008, Patrick Boettcher <[EMAIL PROTECTED]> wrote:
> The new year starts well, maybe: We found something which was in our
> drivers from the beginning and nobody saw it. See attached.
> I'm not sure whether it fixes something, but it might be possible. Can
> everyone try it pl
On Tue, 2008-01-08 at 10:29 +0100, Patrick Boettcher wrote:
>
> The new year starts well, maybe: We found something which was in our
> drivers from the beginning and nobody saw it. See attached.
>
> I'm not sure whether it fixes something, but it might be possible.
> Can
> everyone try it plea
Hi Paul,
>
>> The firmware I am using is the current one of dvb-usb-dib0700-1.10.fw
>>
>
> Do you have the md5sum for that file? I'm currently using the one posted here:
>
> http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500
> (under test firmware)
>
>
md5sum is 5878ebfcba2d8
Hi all,
The new year starts well, maybe: We found something which was in our
drivers from the beginning and nobody saw it. See attached.
I'm not sure whether it fixes something, but it might be possible. Can
everyone try it please?
Patrick.
On Tue, 8 Jan 2008, Nicolas Will wrote:
> On Tue, 20
Il Tuesday 08 January 2008 06:43:18 kevin liu ha scritto:
> Hi,everyone.
>I am using mplayer to test my tv card playing NTSC program.
>But mplayer will give me such complaints:
>++
> Invalid frame duration value (0.635/0.000 => -0.635)
On Tue, 2008-01-08 at 08:17 +, Paul Elliott wrote:
> Initially I tried the latest dvb sources on my 2.6.22 Gutsy kernel but
> didn't have any luck with it,
This is what I am running, no issues with it.
But I have problems 15 miles away from the transmitter, 60 miles may be
the problem.
I'm
>
> -- Missatge reenviat --
> From: "Paul Elliott" <[EMAIL PROTECTED]>
> To: linux-dvb@linuxtv.org
> Date: Mon, 7 Jan 2008 10:35:13 +
> Subject: [linux-dvb] WinTV-NOVA-T-500 Status
> Hi all,
>
> Can anyone give me a state of play on the Nova 500 card? I have one
> here, I'm usin
hi there!
On Sat, Dec 29, 2007 at 03:28:06PM +0100, Thomas Debe wrote:
> Hello !
> I bought such a SkyStar2 2.7V .
i've got the same card!
[...]
> But I can not tune or do anything else.
hm, i've tried with debian and ubuntu and the card worked out of the
box - using the same kernel-module as
Hi Nicolas,
On 08/01/2008, Nicolas Will <[EMAIL PROTECTED]> wrote:
> My reception is certainly sub-optimal, and that was pointed as a
> possible cause.
I also have particularly poor reception, the nearest transmitter is
some 60 miles away.. (But as in my earlier post, the Nova-T works
fine).
> I
Hi Jeffrey,
On 07/01/2008, Jeffrey Borg <[EMAIL PROTECTED]> wrote:
> Don't worry too much about the kernel version the important thing here
> is to use the latest dvb sources from linuxtv.org
Initially I tried the latest dvb sources on my 2.6.22 Gutsy kernel but
didn't have any luck with it, the
Remy Bohmer wrote:
> Hello Gregor,
>
> I remember I also had problems on my Dual Core system, where the bt878
> driver load may fail while it is loaded in parallel with the bttv
> driver.
>
> I added this also in my modprobe.conf:
> install bt878 /sbin/modprobe bttv; /sbin/modprobe --ignore-install
29 matches
Mail list logo
