> These are Philips/NXP PCIe bridges, not supported under Linux. Manu is
> working on a driver for the same family of silicon but don't assume
> anything.
>
I've updated the wiki a little with information I could get off the images I
could find off the Hauppauge website. It looks it is based o
> These are Philips/NXP PCIe bridges, not supported under Linux. Manu is
> working on a driver for the same family of silicon but don't assume
> anything.
>
I've updated the wiki a little with information I could get off the images I
could find off the Hauppauge website. It looks it is based o
> This this OT, but I don't really know where to ask. And after all, the
> odds are that I will find a person with that sort of knowledge here.
Perhaps a satellite TV forum, if you don't get any good replies here.
> Option A - This is the easiest for me to achieve, but the position of
> the power
> http://www.youplala.net/~will/htpc/Satellite/masthead_amp-where.png
Option A is not possible, because the LNB is powered by the tuner too.
You can't have two power supplies in parallel on the same wire.
(The only solution would be to draw the power for the amp from the LNB
supply too, so you wo
years ago i had a sat installed
because of the wall they used a combiner/decoder with power pass
like these
http://www.hillsantenna.com.au/cattleprod/products/D3101DIP
so the power goes via the cable but not onto the fta side
put your amp power supply up in the roof after teh combiner
- Orig
Thanks all for the comments, here or in private.
Option B it will be.
I have to bite the bullet and manage to get a power point where I need
it now...
Nico
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listin
well it looks like i could be stuffed
just found the new windows driver and they call it a dual 5
heres a snip of the driver.inf
%AvsBluebird.DVBT_Dual.DeviceDesc% =Bluebird2.DVBT_NANO2,
USB\VID_0FE9&PID_DB78 ; DUAL4 (XC3028+Zarlink)
%AvsBluebird.DVBT_Hawk1.DeviceDesc%=Bluebird2.DVB
> I also know of this repository
> http://linuxtv.org/hg/~stoth/cx23885-video. However, it hasn't changed
> in a month either. What is the state of the driver? will it be
> considered for integration in to 2.6.25? or 2.6.26? has it been
> dropped all together?
Dropped? No, I just hasn't changed i
>
> I spent several hours again to see if I could get it working on Debian
> sid. I got a little bit further bit still got compilation errors.
>
> Can you please look at my attachments.
>
CC [M] /home/jelle/em28xx-userspace2/em2880-dvb.o
In file included from /home/jelle/em28xx-userspace2/em2
Hello all,
I wanted to create the channel config files for my environment, but
there is no scan example configuration that works for my environment, I
do have the websites with tabels of the frequencys. How do i create my
channel.conf
sudo apt-get install dvb-utils
# dvb-c channels:
fire
Craig Whitmore wrote:
>
>> These are Philips/NXP PCIe bridges, not supported under Linux. Manu is
>> working on a driver for the same family of silicon but don't assume
>> anything.
>>
>
> I've updated the wiki a little with information I could get off the
> images I could find off the Hauppau
Markus Rechberger wrote:
On 2/29/08, Nicolas Will <[EMAIL PROTECTED]> wrote:
hmmm...
guys.
First thing: on a Debian or Ubuntu system, I never needed the full Linux
sources to compile a v4l-dvb tree. The headers were always enough.
Second thing: when you compile a v4l-dvb tree on the side, I d
On Fri, Feb 29, 2008 at 4:03 PM, Markus Rechberger
<[EMAIL PROTECTED]> wrote:
> Hi Jelle,
>
>
> On Fri, Feb 29, 2008 at 3:52 PM, Jelle de Jong
> <[EMAIL PROTECTED]> wrote:
> > Hello all,
> >
> > I wanted to create the channel config files for my environment, but
> > there is no scan example
Jelle de Jong wrote:
> Hello all,
>
> I wanted to create the channel config files for my environment, but
> there is no scan example configuration that works for my environment, I
> do have the websites with tabels of the frequencys. How do i create my
> channel.conf
Take a look at this p
Hi Jelle,
On Fri, Feb 29, 2008 at 3:52 PM, Jelle de Jong
<[EMAIL PROTECTED]> wrote:
> Hello all,
>
> I wanted to create the channel config files for my environment, but
> there is no scan example configuration that works for my environment, I
> do have the websites with tabels of the frequencys
Markus Rechberger wrote:
I spent several hours again to see if I could get it working on Debian
sid. I got a little bit further bit still got compilation errors.
Can you please look at my attachments.
CC [M] /home/jelle/em28xx-userspace2/em2880-dvb.o
In file included from /home/jelle/em2
On Fri, Feb 29, 2008 at 4:10 PM, Jelle de Jong
<[EMAIL PROTECTED]> wrote:
>
> Markus Rechberger wrote:
> >> I spent several hours again to see if I could get it working on Debian
> >> sid. I got a little bit further bit still got compilation errors.
> >>
> >> Can you please look at my attach
This message contains the following attachment(s):
Pinnacle PCTV Hybrid Pro Stick 330e - Installation Guide - v0.1.2j.txt
#!/bin/bash
# Pinnacle PCTV Hybrid Pro Stick 330e - Installation Guide - v0.1.1j.txt
#
# Copyright 2008 Jelle de Jong <[EMAIL PROTECTED]>
#
# This program is
On 2/29/08, Jelle de Jong <[EMAIL PROTECTED]> wrote:
> Markus Rechberger wrote:
> > Hi Jelle,
> >
> > On 2/29/08, Jelle de Jong <[EMAIL PROTECTED]> wrote:
> >> This message contains the following attachment(s):
> >> Pinnacle PCTV Hybrid Pro Stick 330e - Installation Guide - v0.1.2j.txt
> >>
> >
> >
Hi Jelle,
On 2/29/08, Jelle de Jong <[EMAIL PROTECTED]> wrote:
> This message contains the following attachment(s):
> Pinnacle PCTV Hybrid Pro Stick 330e - Installation Guide - v0.1.2j.txt
>
the correct mailinglist for those devices is em28xx at mcentral dot de
I added some comments below and pr
Markus Rechberger wrote:
Hi Jelle,
On 2/29/08, Jelle de Jong <[EMAIL PROTECTED]> wrote:
This message contains the following attachment(s):
Pinnacle PCTV Hybrid Pro Stick 330e - Installation Guide - v0.1.2j.txt
the correct mailinglist for those devices is em28xx at mcentral dot de
I added so
Markus Rechberger wrote:
On 2/29/08, Jelle de Jong <[EMAIL PROTECTED]> wrote:
Markus Rechberger wrote:
Hi Jelle,
On 2/29/08, Jelle de Jong <[EMAIL PROTECTED]> wrote:
This message contains the following attachment(s):
Pinnacle PCTV Hybrid Pro Stick 330e - Installation Guide - v0.1.2j.txt
the
On 2/29/08, Jelle de Jong <[EMAIL PROTECTED]> wrote:
> Markus Rechberger wrote:
> > On 2/29/08, Jelle de Jong <[EMAIL PROTECTED]> wrote:
> >> Markus Rechberger wrote:
> >>> Hi Jelle,
> >>>
> >>> On 2/29/08, Jelle de Jong <[EMAIL PROTECTED]> wrote:
> This message contains the following attachme
Simeon Simeonov wrote:
>
> Did you try changing line 250 in mantis_dvb.c to:
> if (!lnbp21_attach(mantis->fe, &mantis->adapter, LNBP21_PCL,
> LNBP21_ISEL)) {
>
I tried mantis-a9ecd19a37c9. Without the change success in positioning
was about 0% similarly as with multiproto-0448e
>>On Nov 13, 2007 11:16 AM, aldebaran > wrote:
I thank you very much for your quick reply Michel, Markus and Mauro!!
>>
>>[snip]
>>
>> [ 789.484000] cx23885 driver version 0.0.1 loaded
>> [ 789.484000] ACPI: PCI Interrupt :04:00.0[A] ->> GSI 17 (level, low)
>> ->> IRQ 17
>> [ 7
Correct, it's a rebranded Haupauge HVR1500.
> Unlike the previous poster I'm not getting "frontend initialization
> failed" which is promising, but when I run:
>
> /usr/bin/scan
> /usr/share/doc/dvb-utils/examples/scan/atsc/us-ATSC-center-frequencies-8VSB
>
> I get a bunch of "tuning failed" m
On Sat, Mar 1, 2008 at 2:06 PM, Steven Toth <[EMAIL PROTECTED]> wrote:
>
> Correct, it's a rebranded Haupauge HVR1500.
>
>
> > Unlike the previous poster I'm not getting "frontend initialization
> > failed" which is promising, but when I run:
> >
> > /usr/bin/scan
> /usr/share/doc/dvb-utils/e
Ben Firshman wrote:
> Mine has now been running for a couple of days now without problems, I will
let you know if I lose a tuner.
Strange, mine's still crashing out after a couple of hours. Just out of
curiosity...
- What kernel are you running? Distribution? Driver version?
- If you're u
On Friday 22 February 2008, Dominik Kuhlen wrote:
> Hi,
>
> -snip
> >
> > Great, that was the trick, now scanning and szap work fine.
> >
> > Thanks for that hint!
> You're welcome.
>
> BTW: do you receive broken streams (symbol rate 22000 or 27500)?
> Currently I get a loss of about 1
Dominik Kuhlen wrote:
> On Friday 22 February 2008, Dominik Kuhlen wrote:
>> Hi,
>>
>> -snip
>>> Great, that was the trick, now scanning and szap work fine.
>>>
>>> Thanks for that hint!
>> You're welcome.
>>
>> BTW: do you receive broken streams (symbol rate 22000 or 27500)?
>> Currently
Seppo Ingalsuo wrote:
> Simeon Simeonov wrote:
>> Did you try changing line 250 in mantis_dvb.c to:
>> if (!lnbp21_attach(mantis->fe, &mantis->adapter, LNBP21_PCL,
>> LNBP21_ISEL)) {
>>
> I tried mantis-a9ecd19a37c9. Without the change success in positioning
> was about 0% simi
Simeon Simeonov wrote:
> With 72e81184fb9f I get lock 5/10 times of the times and with a9ecd19a37c9
> 9/10 times.
> But with 72e81184fb9f I couldn't get neither my rotor nor diseqc switch to
> work as
> opposed to the tip where both work with some problems - sending more than
> 2 diseqc message
I am using VP-1041 with the lnb21_attach changes to the ISEL and PCL bit
settings.
At the moemnt I have no clue why I am having this diseqc issue. I also checked
the
logs and I see from time to time diseqc_fifo_full messages but there is no
correlation
with the problem. For example I have not se
Simeon Simeonov wrote:
> I am using VP-1041 with the lnb21_attach changes to the ISEL and PCL bit
> settings.
> At the moemnt I have no clue why I am having this diseqc issue. I also
> checked the
> logs and I see from time to time diseqc_fifo_full messages but there is no
> correlation
> with t
Yes, ocasionally I see the message from stb0899_wait_diseqc_fifo_empty()
but trying to increase the time in the call did not help. So I am not sure if
my problem is related to that message.
- Original Message
From: Manu Abraham <[EMAIL PROTECTED]>
To: Simeon Simeonov <[EMAIL PROTECTED]>
Hi,
I've tried to add an extra argument to gnutv to set the size of the
dvb_ringbuffer via
DMX_SET_BUFFER_SIZE.
I have not really understood the difference between dvr and demux.
It seems that gnutv uses the dvr to read from the DVB card and then copies the
content to a file.
I call
int dvbd
Hi,
Help, please.
My TV card: AVerMedia_AverTV_Hybrid_FM_PCI_A16D
uname -a:
Linux ubuntu 2.6.22-14-generic #1 SMP Sun Oct 14 21:45:15 GMT 2007
x86_64 GNU/Linux
I have successfuly installed this for DVB-T using the instructions at
Marcus's
http://mcentral.de/wiki/index.php5/AVerMedia_AverTV_Hybr
Hi again,
Thanks for all the replies! I've checked out a few programs and decided
to use dvbstream as Tim Hewett suggested.
>> Obviously, you seem to have never actually tried VDR. It's
>> extremely lean and clean and it don't need to run with any output.
>> You can telnet into it and schedule r
On Fri, 2008-02-29 at 21:31 +, Philip Pemberton wrote:
>Answers are "2.6.24-8-generic", Mythbuntu 8.04 alpha 2, Hg
> 615ce34, and
> yes (EIT scanning on) for me, and firmware is dvb-usb-dib0700-1.10.fw
> (in
> /lib/firmware/2.6.24-8-generic). I'm planning to try
> dvb-usb-dib0700-03
39 matches
Mail list logo