hi hartmut,
Hi, Kevin
KevinLuX schrieb:
Hi, Kevin
Hi Harmut
Few weeks ago, i modified the driver to support the LNA on this card.
So can you please try the recent version of the driver? You might
set the option debug=1 for the modules tuner and tda827x.
Another possible
Today i will test another antenna (a little mobile) to discovery if
something change.
I have try another antenna like this :
http://www.3dnews.ru/documents/10598/Antenna.jpg
away from pc and out of window. Bad result, very few channel (10) and
the message from kernel log is the same:
---BeginMessage---
Hartmut Hackmann ha scritto:
If kaffeine works but xine and scan not, the reason lies in your initial
tuning file. If channel parameters - i.e. the guard interval - are wrong,
the tda10046 won't lock. This can easily be the case since some other
drivers just ignore these
Hartmut Hackmann ha scritto:
If kaffeine works but xine and scan not, the reason lies in your initial
tuning file. If channel parameters - i.e. the guard interval - are wrong,
the tda10046 won't lock. This can easily be the case since some other
drivers just ignore these values.
Thanks, i
Hi, Kevin
Hi Harmut
Few weeks ago, i modified the driver to support the LNA on this card.
So can you please try the recent version of the driver? You might
set the option debug=1 for the modules tuner and tda827x.
Another possible cause is that many drivers ignore the channel
parameters
Hi all,
With my pinnacle 310i that work thanks to an harmut's patch from october
2006
i can't receive and get signal from a MUX in milan italy.
Other channels works very well, but when i try to scan with kaffeine or
simply
with the utility scan on it-Milano on this MUX :
T 50600 8MHz 2/3
Cabrito Estrabico ha scritto:
Hello,
I'm Ubuntu 6.06 LTS user on kernell 2.6.15-27-k7 with the last v4l-dvb
sources compiled to make
this Pinnacle 310i runing dvb-t with dvb-fe-tda10046.fw firmware.
Being from France I use the secam videostandard and everything is ok
for analogue tv.
Here
Hartmut Hackmann ha scritto:
Hi,
KevinLuX wrote:
Hartmut Hackmann ha scritto:
Hi, all
First: thanks for testing.
To sum up:
Things seem to work, right?
Just some comments:
- It should not be necessary to set card and tuner type manually.
- If no dvb devices are created, the reason most
Hartmut Hackmann ha scritto:
Hi, all
First: thanks for testing.
To sum up:
Things seem to work, right?
Just some comments:
- It should not be necessary to set card and tuner type manually.
- If no dvb devices are created, the reason most probably is that
the saa7134-dvb module is not loaded.
Hartmut Hackmann ha scritto:
Hi, Folks
This patch should make make the Pinnacle 310i DVB-T working.
It is based on the patch by Pierluigi_Rolando and should apply
to the v4l-dvb repository at http://www.linuxtv.org of today.
I don't have this card, so i need you to test it.
The card should be
hi emilio,
Kevin, did you gave a try to /dev/radio0?
Could you please try with kradio, or radio if it's tuning correctly?
I'll try the path on my debian this afternoon. (I hope so)
Cheers,
With gradio, and gnomeradio the card seems not works but i don't know if
this happen
because i haven't
hi Antonio.
Well, I've done a fresh install (last mercurial) and using firmware as
KevinLux says in the previous message of this thread and DVB-T works
fine.
Analog radio and tv continues with the same problem... the audio (I'm
trying to debug it, but not news for now :)...
Have you connected
Hi,
hi have ubuntu dapper with vanilla kernel and hg mercurial clone.
I have compiled and installed v4l-dvb.
My card is a pinnacle 310i both dvb and analog.
In analog mode with saa7134 card=77 if Xorg run with the new nvidia
driver /(1.0-9625
Linux Display Driver – x86
cedbor ha scritto:
I recently purchased a Pinnacle PCTV 310e hybrid analog/dvb-t usb box
and discovered that there's no support for it under linux.
Windows drivers are m9205.sys and m9207bda.sys, so i suppose that m920x
should support it.
Is there anything i can do to help developpers add this
14 matches
Mail list logo
