Hi,
I don't understand the following lines in av7110.c from the last CVS DVB
driver :
Where variable "Root" does it declared ?
Where the content of Root file does it charged into this variable ?
static int
bootarm(av7110_t *av7110)
{
...
dprintk("bootarm: load dram code\n");
Here are the kernel messages I have with the last CVS driver :
...
DVB: AV7111(0) - firm f0240009, rtsl b0250018, vid 71010068, app 00012502
saa7146_core.o: master_xfer called, num:1
saa7146: ==> i2c_reset
saa7146: ==> i2c_status_check:0x0100
saa7146: ==> i2c_status_check:0x000
interruption
(about 1 second).
Does the CONTINUE command flush internal board buffer ?
-Original Message-
From: Johannes Stezenbach [mailto:[EMAIL PROTECTED]]
Sent: lundi 13 janvier 2003 13:53
To: Marlec Olivier
Cc: [EMAIL PROTECTED]
Subject: Re: [linux-dvb] loosing data with Freeze command
On
Hi,
I am using a DVB-S board version 2.1 with DVB driver version 0.9.4. I don't
get data flow by PCI bus (so I'm not using the host DRAM) but directly by
the common interface connector. When I call the driver DVB Freeze command
then the Continue command, I lose about 1 second of video on display.
D
Hi,
I'm using DVB driver 0.9.4 whith a DVB-S board version 2.1.
When I insert the PMT in the MPEG2 flow I use like a video source, I get a
black screen during about 1 second after each "start display". Is DVB driver
or firmware use PMT ?
Olivier Marlec
Research & Innovation
Corporate Research Ren
Hi,
I've just received a DVB-s board rev 2.2. I use it with the 0.9.4 version of
DVB driver and vdr 1.0.4.
It seems there a decoder problem : I have a 40 Mb/s MPTS as MPEG2 source and
if I send all this flow to the decoder I can see a good video. On the other
hand , if I send to decoder just one SP
EMAIL PROTECTED]]
Sent: vendredi 29 novembre 2002 14:59
To: [EMAIL PROTECTED]
Subject: [linux-dvb] Re: OSD problème with 0.9.4 DVB driver
Marlec Olivier wrote:
>
> Hi,
> I've just released the DVB driver version from version 0.8.1 to 0.9.4.
I've
> just modified the low level sofw
Hi,
I've just released the DVB driver version from version 0.8.1 to 0.9.4. I've
just modified the low level sofware to adapt my application for the new
driver 0.9.4. I'm using a OSD window of 480x420 size. With the 0.8.1 version
of driver I hadn't got any problem but with the 0.9.4 version I don't