Il Saturday 23 February 2008 07:15:41 Adam Nielsen ha scritto:
Hi everyone,
I've just installed a new DViCO FusionHDTV dual digital 4 (which appears
to the PC as two USB Zarlink ZL10353 DVB-T devices.)
I'm trying to set up dvbstream to send the whole transport stream across
the network to
Il Saturday 23 February 2008 09:14:44 Adam Nielsen ha scritto:
Hi everyone,
I'm currently setting up a new server that will (among other things)
record TV shows for me. In the past I've used cron to schedule
recording jobs, and I've used dvbrecord to do the actual recording.
This set up
On Thursday 07 February 2008 14:39:44 Russell Kliese wrote:
Analog TV worked without a problem (even with the older drivers).
There is still a problem with the digital decoder. Sometimes it
works fine (I can scan for channels and can run tzap to view a
channel using mplayer). However,
Hi,
mplayer checked out from svn, when used with its internal fork of
libfaad, can now decode LATM AAC streams that have recently been
deployed in Norway, New Zealand and maybe somewhere else
(sadly, because LATM is an extremely bad idea overall)
and for which there was some request for support
Il Monday 21 January 2008 12:12:17 Newsy Paper ha scritto:
It's really a pity that there's now interest in that bug although
there are about 10 FTA channels at 39° E that show that problem. :(
regards
Newsy
Newsy Paper [EMAIL PROTECTED] schrieb: Hi!
seems there is a bug with the hw pid
Il Sunday 13 January 2008 20:40:39 Robert Noble-Eddy ha scritto:
Managed to get a bit further myself - I realized that I need to
provide some firmware. I tried to use the firmware that is listed
in the get_dvb_firware script, for the tda10046 there are two
versions (one for lifeview, one
Il Tuesday 08 January 2008 06:43:18 kevin liu ha scritto:
Hi,everyone.
I am using mplayer to test my tv card playing NTSC program.
But mplayer will give me such complaints:
++
Invalid frame duration value (0.635/0.000 = -0.635).
Il Sunday 06 January 2008 18:18:46 hermann pitton ha scritto:
Am Sonntag, den 06.01.2008, 16:18 +0100 schrieb Eddi De Pieri:
Hi,
I've a FlyDVB TRio, and I've found a problem with viewing or
recording of Analog stream while recording a DVB-T stream on my
Debian Etch system with driver
Il Thursday 03 January 2008 17:12:07 Matteo Pampolini ha scritto:
Hello everybody and happy new year,
my name is Matteo, I'm writing from Italy and this is
my first post to this list.
I'm trying to record an entire (data included) DVB-T
TS into a file, I tried many solutions before posting,
Il Saturday 22 December 2007 23:28:30 Nico Sabbi ha scritto:
Il Saturday 22 December 2007 18:43:01 Antti Palosaari ha scritto:
can you try to put sleep (10ms?) before / after usb-message
sending to see if it helps? There has been some discussion
similar problem before with faster machines
Hi,
in the past my MSI MegaSky 580 used to work decently,
but in recent Fedora 8 kernels such as Linux xp 2.6.23.9-85.fc8
I get invariably the following messages for every tuning tried:
usbcore: registered new interface driver dvb_usb_gl861
qt1010 I2C write failed
qt1010 I2C write failed
zl10353:
Il Saturday 22 December 2007 18:43:01 Antti Palosaari ha scritto:
can you try to put sleep (10ms?) before / after usb-message sending
to see if it helps? There has been some discussion similar problem
before with faster machines.
Regards
Antti
msleep(10) only in gl861_i2c_msg() seems to
Hi,
in recent kernels (up to 2.6.23xxx) my Lifeview Trio can't tune
anymore VHF channels, that used to work in previous kernels
(after a patch by Hartmutt that IIRC was integrated in several months
ago). I haven't tried an hg snapshot yet, but I'd like to know if
other users have my problem.
Il Tuesday 04 December 2007 08:10:26 Iilluzion Shadow ha scritto:
Hi there!
I appreciated for good staff you develop.
The question is:
is it a bug or feature that to be able to have dvbnet device
operational to be able to get traffic i need to have frontend
device to be held open by a user
Il Tuesday 04 December 2007 10:40:13 Arris [ML] ha scritto:
hi,
what is the trick to enable the hid (remote) functionality on this
chip?
congratulations for having hijacked a thread (and consequently broken
the mailing list archive)
___
linux-dvb
Il Tuesday 27 November 2007 14:17:35 Eduard Huguet ha scritto:
Thank you very much. So according to the info you gave me then the
HVR-3000 is really not a good option for me, as I'd really want to
use both the DVB-T and DVB-S, probably at the same time.
Do anybody knows if the same thing
Il Thursday 22 November 2007 12:32:08 Hong Yin Lim ha scritto:
Hi,
I'm trying to capture 1 whole Transport Stream (TS) from my card.
These are the output from my dvbstream command:
[EMAIL PROTECTED] dvbstream]# ./dvbstream -f 554000 -s 6875 -qam 256
-n 30 8192 test.ts
dvbstream v0.7 -
Il Friday 09 November 2007 17:37:24 Simon Hargreaves ha scritto:
The update to the latest kernel version has broken my recording
programme completely and now returns device busy. I'm using dvbtune
to set up the dvr0 device for TS recording but it's now locking the
device so no other program
Il Friday 09 November 2007 17:28:35 Simon Hargreaves ha scritto:
What dvb tuning command line utilities are there for linux at the
moment? The options I have a zap, but this does not tune to a
service ID it requires specified video and audio pids, or dvbtune
which although will tune into a
Il Thursday 01 November 2007 20:36:36 Steven Toth ha scritto:
Ian Bonham wrote:
Steve,
Does this mean you will be working on an alternative to
MultiProto? As an HVR4000 user I am following this thread closely
as you might imagine.
Ian
Most likely yes.
- Steve
I really hope there
Il Thursday 25 October 2007 04:07:19 Hong Yin Lim ha scritto:
Hi,
I've tried to use the following command to capture the TS from a
DVB-C card:
$ dvbstream -f 594000 -s 6875 -0 8192 test.ts
However, I get the follwoing result:
*dvbstream v0.7 - (C) Dave Chapman 2001-2004
**Released
Il Wednesday 24 October 2007 09:20:04 Hong Yin Lim ha scritto:
Hi,
I am new to this whole dvb thing.
Basically, I want to capture the TS off the tv-tuner card (DVB-C).
I have successfully used the czap scan to get the channels
configuration.
After that, I make the dvbstream: run it to
Il Sunday 14 October 2007 17:06:38 Francesco Schiavarelli ha scritto:
I own a TT-3200 and I'm interested in receiving those kind of
signal. I understand that ATM is not possbile, but will it be in
the future? In other words it's an hardware or software/firmware
limitation?
thanks,
Francesco
Il Friday 12 October 2007 10:43:01 Alexander E. Patrakov ha scritto:
Sigmund Augdal wrote:
payload type 96 and 97 is in the dynamic payload type range
according to current rfcs.
OK.
The question is, still, how to play this.
To play it you will need a SDP that describes what the ESes
Il Friday 12 October 2007 13:57:26 Alexander E. Patrakov ha scritto:
Nico Sabbi wrote:
if in the SDP of the broadcast transmission there's some kind of
configuration (base64-encoded) string (generally known as
extradata ) then you won't get ffmpeg (or any other decoder)
decode the raw ESs
Il Friday 12 October 2007 14:55:17 Alexander E. Patrakov ha scritto:
Nico Sabbi wrote:
the sdp is surely in one of the multicast transmissions you have
Do you mean that it should be hidden somewhere in my udp.dump file?
But it contains only UDP packets sent to ports 2 and 20002, and
all
Hi,
I'm trying to add support to mplayer and ffmpeg for LATM AAC as
carried in DVB (LATM is a framing format very different from the
usual ADTS transport), but I don't understand how LATM frames are
carried: the DVB SI specs (1.7.1) don't say if LATM should be carried
or not in one of the 3
Il Friday 05 October 2007 13:25:01 hai scritto:
On Fri, 2007-10-05 at 13:10 +0200, Nico Sabbi wrote:
...
thanks, it's what I needed to know;
...
Good :-)
Do you have that PDF? the link is broken
Try this link:
http://www.dvb.org/technology/standards/a001r7.tm1214r30.dTS101154
Il Thursday 04 October 2007 15:34:11 Thomas Lagemann ha scritto:
Hi there,
this is a bit off-topic since it is not a really linux-specific
question, but maybe someone does know this right away.
I'm lookig for a way to recognize the type of a video-frame in
MPEG-2 (I.P or B) to create smooth
Il Wednesday 03 October 2007 09:14:37 Per Thomas Jahr ha scritto:
On Sun, 2007-09-30 at 22:59 +0200, Nico Sabbi wrote:
If you compile dvbstream from cvs (dvbtools.sf.net) and run
./dvbstream -f FREQUENCY -bw 8 -c 0 -n 10 -prog -o:/dev/null 1
wil give you a list of the available
Il Wednesday 03 October 2007 08:49:54 Trygve Iversland ha scritto:
You are probably right. I tried playing the output from dvbstream
in mplayer, and the errors produced were FAAD errors, so th dvb
part of it is probably OK. It would be nice to know if you are
actually able to play it, so I
Il Monday 01 October 2007 22:10:22 Trygve Iversland ha scritto:
I think that your problem is the fact that the channels are h.264
and not mpeg-2. Running scandvb -vv shows the following pids:
PMT 0x010d for service 0x0066
OTHER : PID 0x020d TYPE 0x1b
OTHER : PID 0x02b4 TYPE 0x11
Il Sunday 30 September 2007 21:16:42 Per Thomas Jahr ha scritto:
On Sat, 2007-09-29 at 20:55 +0200, Per Thomas Jahr wrote:
...
but the video and audio pid for me is always 0 after a scan.
...
(see http://heim.ifi.uio.no/~perja/channels.conf)
Hmm, in channels.conf there is a service
James Le Cuirot wrote:
On Thu, 20 Sep 2007 15:16:43 +0200
hermann pitton [EMAIL PROTECTED] wrote:
Hi,
if the chips are unchanged, that I don't know, at least I had a report
from a guy with a FlyDVB Trio cardbus recently and the same ISL, tuner
and channeldecoder and he seemed to fine with it
Fassio Blatter wrote:
*Steven Toth* stoth at hauppauge.com
mailto:linux-dvb%40linuxtv.org?Subject=%5Blinux-dvb%5D%20HVR4000%20SupportIn-Reply-To=25119.1174063408%40kewl.org
/Fri Mar 16 18:41:50 CET 2007/
On 9/15/07, *Fassio Blatter* [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] wrote:
I
Steven Toth wrote:
OK.
Let me produce a diff and see what changed, it was a long time ago.
Nico, I take it the sourceforge project is your?
- Steve
no, it's Dave Chapman's, but I've been the only one committer for
a lot of time
___
kevin liu wrote:
Dear Nicola
Mplayer can give a perfect HDTV effects, but after a period of
time, it gives such complaints:
Too many video packets in the buffer: (148 in 8421326 bytes).
Maybe you are playing a non-interleaved stream/file or the codec failed?
For AVI files, try to
kevin liu wrote:
Hi, guys
Linuxtv.org suggests many players for watching tv under linux OS.
I made gxine and mplayer work well with the FusionHDTV5 USB silver
tv card, but I only could watch SDTV using the two players.
FusionHDTV5 USB silver can support HDTV, but I can't use gxine
Boris Andratzek wrote:
Hej all,
after having to learn that my old DVB-T hardware is making too much
trouble, I decided to spend some Euros to buy a new one.
Now before I do this, I want to ask you for your recommendation for the
right choice of DVB-T USB stick. It has to support USB 1.1 for
Stephen Williams wrote:
Surely this can't be too much to ask? I'm looking for a DVB-T USB
stick which I can buy now and is solidly supported, that's all.
Previously i've picked up a couple of MSI Digivox II sticks that when
delivered turned out to be unsupported MSI Digivox II V2.0 sticks,
Uwe Bugla wrote:
Am Sonntag, 22. Juli 2007 13:44:44 schrieb timecop:
I propose we setup #linuxtv-without-jews on feenode and coordinate our
efforts to take over those fools who run the real LinuxTV scam.
-tc
Hello tc,
could you please stay off from here with such a no-brain
Wade J. Weppler wrote:
I'm trying to get szap (or dvbtune) to maintain a lock, even after dvbtune or
szap have been closed.
Whenever I tune to a transponder, it gets a lock, and then I close the
application and open up dvbsnoop. Dvbsnoop will work for a few seconds, and
then no further
Stefano Busnelli wrote:
Hi people, today I've subscribed this mailing list.
I have a problem, and maybe this is the right place where to find a way for
fixing it.
I have bought a DVB pcmcia card and I can't make it work with the driver
saa7134. The problem, I think, is that it is not supported
Hi,
can anyone tune VHF with this tuner? Using a friend's MSI Megasky 580
I can't, although the signals of three different transmitters are very
strong here.
Tuning to UHF works pretty well.
Are there limitations with this tuner?
Thanks,
Nico
___
CityK wrote:
I have to, having never used them, profess ignorance to those two utils
Nico. Although I also see that someone recently added a DVBstreamer
app to the inventory too. I haven't the slightest notion on how it would
differentiate from the former dvbstream
neither do I
Were
CityK wrote:
So there is:
- zap ... intended for developers
- azap ... for ATSC and N.A dig. cable (STCE 07)
- czap ... for DVB-C
- szap ... for DVB-S
- szap2 ... for DVB-S2
- tzap ... for DVB-T
Is there any technical reason why these 6 utilities aren't blended
together into a
Peter Fassberg wrote:
mplayer complains about FPS not specified in the header or invalid,
use the -fps option..
Can someone explain why mplayer don't find that info in the stream?
because it's missing :(
ARG!!
the framerate is optional in the main header of H264 (sps).
Peter Fassberg wrote:
Hi all!
We will soon have HDTV in the Teracom DVB-T network here in Sweden.
In Stockholm the transmissions will officially start on saturday,
however they are already up and running.
The new mux is named Teracom network 6 and the Nacka transmitter
in Stockholm are
Louis-David Mitterrand wrote:
Hi,
I'm a happy user of zapdvb in client/server mode (one laptop connected
to a Cinergy T² DVB-T receiver and another roaming around the house
receiving through wifi).
The only problem I have is to change the channel language. For instance
on ARTE most movies
laasa wrote:
Ok, I have found the filter. I must call szap2 with -p and the videopid :
SAT1.HD:szap2 -t2 -p511 Sat1HD
Pro7HD: szap2 -t2 -p255 Pro7HD
...
Now I can create H264-files with my KNC1-DVBS2- and (sometimes) my
TT3200-board.
Thanks for help.
dvbstream from cvs
Zoilo Gomez wrote:
The Diseqc-specs at
http://www.eutelsat.com/satellites/pdf/Diseqc/Reference%20docs/bus_spec.pdf
(table on page 13) confirm that dvbtune is in fact sending the wrong
command.
With a patched dvbtune (pol-bit and band-bit both inverted) it works
OK, and is also according to
Nico Sabbi wrote:
Zoilo Gomez wrote:
The Diseqc-specs at
http://www.eutelsat.com/satellites/pdf/Diseqc/Reference%20docs/bus_spec.pdf
(table on page 13) confirm that dvbtune is in fact sending the wrong
command.
With a patched dvbtune (pol-bit and band-bit both inverted) it works
OK
Nico Sabbi wrote:
I disagree with your changes:
according to the specs that you linked the fields are:
*switch-number
*switch option
*satellite position
*polarization
*frequency_is_in_hi_band
*bytecode
1 A A V Lo F0
2 A A V Hi F1
Zoilo Gomez wrote:
dvbtune-0.5 source apparently contains a bug where it inverts both the
polarization and high/low band bits in the diseqc command ... as I
cannot find any info on this anywhere, I am posting my results here.
I discovered this while using a KNC1 DVB-S card to compare diseqc
Christoph Pfister wrote:
From a kaffeine user ...
Christoph
T 18600 8MHz 2/3 1/2 QAM64 8k 1/32 NONE
this is probably wrong: VHF uses 7 Mhz, not 8
# C29
T 53800 8MHz 2/3 1/2 QAM64 8k 1/32 NONE
--
Email.it, the professional e-mail, gratis per te: http://www.email.it/f
Dietmar Zlabinger wrote:
Hi,
I am looking for help on receiving DVB-H.
I get to the point where the encapsulated IP is attached to a network
interface (as dvb0_0 using dvbnet -p portnr). At this stage I am
able to dump the UDP-packets received using tcpdump. But I am not able
to get that
Nico Sabbi wrote:
I've just finished to add to dvbstream in cvs a basic PAT and PMT
parser that automatically adds to every map all the PAT and PMT pids
corresponding to the program(s) enclosing the chosen pids.
Multi-sections tables are not supported.
The change is completely transparent
Nico Sabbi wrote:
Nico Sabbi wrote:
I've just finished to add to dvbstream in cvs a basic PAT and PMT
parser that automatically adds to every map all the PAT and PMT pids
corresponding to the program(s) enclosing the chosen pids.
Multi-sections tables are not supported.
The change
Andrew Archibald wrote:
The saa713x drivers seem to work really well with my Tevion/KWorld DVB-T
220RF. Thanks for developing this great software.
I have, however, discovered one small bug with the dvb support, in that
saa7134-dvb isn't loaded automatically. So a 'modprobe saa7134-dvb' is
I've just finished to add to dvbstream in cvs a basic PAT and PMT
parser that automatically adds to every map all the PAT and PMT pids
corresponding to the program(s) enclosing the chosen pids.
Multi-sections tables are not supported.
The change is completely transparent to users, so no special
Torbjörn Lundquist wrote:
Thanks Fnord, not _so_ ugly script! Seen worse. I have two questions:
1. What version of dvbstream do you use and where ? I run 0.5 but
cannot find any newer. But I see that your options are not supported
by my version.
http://sourceforge.net/cvs/?group_id=50669
Torbjörn Lundquist wrote:
Solved!
With the new version (0.6) of dvbstream the command:
dvbstream -o:sol2.ts -f 52200 0 1029 1028 5070
only records one program. This did not work in 0.5 for me. Maybe
someone should update dvbstreams homepage so that 0.6 is downloadable?
fear not,
What would happen if I set a pes filter on pid N (e.g. pmt_pid) and at
the same time a section filter on the same pid?
Would I get data from both or only from the section filter?
The pdf doesn't mention this possible use case (or at least I didn't
find it).
Thank,
Nico
Måns Rullgård wrote:
Nico Sabbi [EMAIL PROTECTED] writes:
What would happen if I set a pes filter on pid N (e.g. pmt_pid) and at
the same time a section filter on the same pid?
Would I get data from both or only from the section filter?
The pdf doesn't mention this possible use case
Torbjörn Lundquist wrote:
When playing with mplayer I got video and audio out of sync. How do I
fix that?
maybe during the first few seconds, but after little time it will resync
--
Email.it, the professional e-mail, gratis per te: http://www.email.it/f
Sponsor:
Video Corsi GRATIS -
Hi,
using a very recent hg pull I can see in the logs the following
message (tuning and receiving work fine)
BUG: at kernel/lockdep.c:1860 trace_hardirqs_on()
[c010318c] show_trace_log_lvl+0x19/0x2e
[c0103285] show_trace+0x12/0x14
[c010329b] dump_stack+0x14/0x16
[c012c573]
Thomas Pinz - DC2RPT wrote:
In my personal experience, the differences between the devices are most time
very small and i could not recommend a device which is better than all
others.
Kind regards,
Thomas Pinz
theory apart (that I don't understand at all), in my experience
some cards
Nico Sabbi wrote:
Thomas Pinz - DC2RPT wrote:
In my personal experience, the differences between the devices are
most time very small and i could not recommend a device which is
better than all others.
Kind regards,
Thomas Pinz
theory apart (that I don't understand at all), in my
Ali H.M. Hoseini wrote:
could I have your patch for scan, that adds correct pmt_pid?
uhm, dvb-apps from hg still doesn't dump the pmt_pid in channels.conf, thus
scan it still broken.
I wonder why none of the developers cares enough to fix it.
Patch is here; hopefully it still applies
Hartmut Hackmann wrote:
Hi, Nico
I found a bug in the tda827x module. A buffer was one byte too short.
This might have been the cause of the crashes since the trouble started
after the first tuning attempt and the bug was in the tuning function.
So may i ask you to apply the attached patch or
Ali H.M. Hoseini wrote:
Hi,
After searching internet (and also a clue reply from this list), I found
that I should add pat and pmt pids to dvbstream output to work with
videolan (vlc).
I found pmt pid from scan utility output, and added 0 for pat pid, as I
found in instructions.
but when I
Ali H.M. Hoseini wrote:
please, don't top post.
so what are those pmt_pid numbers that scan utility prints?
print where? on the screen? maybe -hopefully- it was fixed since last
time I used it
could I have your patch for scan, that adds correct pmt_pid?
ok, tonight if scan is
Nico Sabbi wrote:
Hartmut Hackmann wrote:
Hm, there seems to be a mad pointer or a buffer overflow somewhere.
Any additional hint is welcome so that i at least can reproduce
the problem.
Do you run a 64 bit system. Did your card work with the drivers
from the kernel distribution?
Hartmut
Hartmut Hackmann wrote:
I still haven't found a cause for the problem.
A vague idea: what happens if you start an analogue application first?
Hartmut
the analog tuning works without problem (and this reminds me that
adding .tuner_config=2 to the trio entry in saa7134-cards.c triggered
the
Hartmut Hackmann wrote:
Hi, Nico
Nico Sabbi schrieb:
Hi
I've just noticed that in your tree there's support for the
pre-amplifier of some Philips cards.
Does the Lifeview Trio already use your new code? Or do I need to add
support for it?
I copy this to the mailing lists because i think
Nico Sabbi wrote:
Hartmut Hackmann wrote:
Hi, Nico
Nico Sabbi schrieb:
Hi
I've just noticed that in your tree there's support for the
pre-amplifier of some Philips cards.
Does the Lifeview Trio already use your new code? Or do I need to add
support for it?
I copy this to the mailing
Hartmut Hackmann wrote:
Hi, Nico
Nico Sabbi schrieb:
same crash without my change; it seems that 2.6.20 and saa7134-dvb don't
get alone at all
Thats really strange, i have 2.6.20 running here too and i can't reproduce
this yet.
If i understand the dump right, the crash occurs
Hartmut Hackmann wrote:
Hm, there seems to be a mad pointer or a buffer overflow somewhere.
Any additional hint is welcome so that i at least can reproduce
the problem.
Do you run a 64 bit system. Did your card work with the drivers
from the kernel distribution?
Hartmut
my system is a
Chris Malarky wrote:
Hi Nick,
On Tue, 2007-02-20 at 23:37 +, Nicholas Fearnley wrote:
I have had real problems getting the TT-1500 (DVB-T) working.
I have been using dvbtune for some diagnostics.
The following should yield BBC Multiplex on my local transmitter
dvbtune -c 0 -qam 16
Johann Hanne wrote:
Hi,
I'm currently implementing a streaming server which will stream (part of) the
TS received from /dev/dvb/adapter?/dvr? to a multicast socket. I'd like to be
as efficient as possible, so I took at look at the splice() function
implemented as of Linux 2.6.17 and it
Christoph Pfister wrote:
From a kaffeine user ...
and the location is? ...
--
Email.it, the professional e-mail, gratis per te: http://www.email.it/f
Sponsor:
Cassine di Pietra: una varietà completa di vini del Veneto,
* in più un regalo per il primo ordine! Clicca subito qui
*
Chribu wrote:
[EMAIL PROTECTED]:~$ dvbstream -f 482000 512 650 -o tmp.mpg
... -bw 8
dvbstream v0.5 - (C) Dave Chapman 2001-2004
0.5 is ancient. Use a fresh cvs checkout instead
--
Email.it, the professional e-mail, gratis per te: http://www.email.it/f
Sponsor:
Problemi di
Chribu wrote:
0.5 is ancient. Use a fresh cvs checkout instead
Could this be the cause? I just downloaded it through apt-get in Ubuntu
6.06.
yes
From http://sourceforge.net/projects/dvbtools/ only 0.5 is available.
no, cvs is available
I'm quite new to linux, so i'm not
[EMAIL PROTECTED] wrote:
Hallo!
I get this error if I try to use tzap on my hama USB 2.0 DVB-T Stick:
tzap ZDF
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
ERROR: error while parsing constellation (syntax error)
.tzap/channels.conf was created by:
scan
Ralph Metzler wrote:
In the HVR3000 case, do both frontends then use the same demux0?
So, if one can open only one at the same time, both should use
demux0?
please, NO!
it will be a hell to support in applications.
Please, do it simple and bind frontendN to demuxN and dvrN (and netN)
If
José Oliver Segura wrote:
Hi all,
just a silly question regarding getting streams with tzap/cat
and how to use them to feed a player:
Trying to make work 100% my Hauppauge wintv nova-t stick (4th
usb stick I'm trying with linux, but this seems to work OK), I've
found that some
Hartmut Hackmann wrote:
I think this is a good intermediate solution. I can integrate it.
Would you accept a more generic name for the option like
use_frontend? I could do the same for the MD8800.
Please leave me a note. May i still add your signature if i change this?
Hartmut
of course;
Andrea Venturi wrote:
Klaus Schmidinger wrote:
No - and it won't.
TS is for broadcasting, and PES is for recording.
is this just a personal opinion?
me, actually i can see a great move toward TS also for storing..
i think about the HDV storage cassette; there is a TS inside the
Klaus Schmidinger wrote:
Hmm, I would have expected that information to be in there somewhere.
The decoder should be able to detect the encoding of the data stream
by itself, without the application having to tell it what the data
actually is.
Klaus
from an application point of view it
Klaus Schmidinger wrote:
Well, that might be feasible for live viewing, but what
about replaying a recording? There is no PAT/PMT in a
recording.
Klaus
there is if you save the TS, rather than that funny .vdr aka pes.
Can VDR save the TS now?
___
Mario Rossi wrote:
Hi,
I'm trying to copy the stream of hdtv using mplayer and mencoder, but
they think the video type is MPEG2(type 0x1002 in
libmpdemux/demux_ts.c) while I think it should be H264(type
0x1005), so it does not play anything.
This is the output of ITV HD Trial after I
Mario Rossi wrote:
add the pmt_pid to your list
Sorry, but I do not understand.
the pmt_pid is the pid that contains the PMT; it's listed in the pat.
if you dump the whole stream to a file with
dvbstream -f ... -o 8192 dump.ts
then run
decode_pat dump.ts
you will get a list of
Jim Shaffer wrote:
On Saturday 21 October 2006 04:22 am, Nico Sabbi wrote:
sample?
What's the best way to capture a sample?
mplayer -dumpstream -dumpfile stream.mpg dvb://TV_station
or
dvbstream ... tuning parameters .. -o pids stream.mpg
then you can upload your sample
Jim Shaffer wrote:
I have a question about using this device with mplayer. I set up a
channels.conf file manually using information extracted from tsbrowser on a
working Windows install. If I play a QAM channel with 2.0 sound, it works
fine. If I play a QAM channel with 5.1 sound, I get no
Harnois Anne-Sophie wrote:
Hello everybody!
Some of the MPEG-TS packets I receive contain a pointer field bigger
than 184 (continuity counter is correct). How to explain that? Shouldn't
Pointer field be inside 0 and 184?
Any comments?
AnneSophie.
maybe for some strange reason it spans
Mario Rossi wrote:
An application can simply try DMX_PES_OTHER first and if
-ENOTSUPPORTED is returned,
as it would be the case here, it can fallback to DMX_PES_{AUDIO,VIDEO}.
Mythtv does it this way afaik.
it seems doable. I'll have a try modifying dvbstream (and mplayer
which is the
Simon Detheridge wrote:
Hi,
On my system, mplayer sometimes (but not always) requires two attempts to
tune into a dvb channel when launched with a dvb:// url. (For example,
'mplayer dvb://BBC ONE' -- The first time, it comes up with TUNING
FAILED, but the second time it almost invariably works
Mario Rossi wrote:
Hi,
I had problems tuning a TTUSB DEC-2000T.
I can tune using tzap, while other applications like mplayer,
dvbstream fail.
Debugging the code I found that the only difference is in the call
DMX_SET_PES_FILTER.
tzap uses DMX_PES_AUDIO and DMX_PES_VIDEO while dvbstream
toni proyectista wrote:
Hello,
dvbstream takes me this error: Not able to lock to the signal on the
given frequency, before it works right.
what's happening?
post log and compare it with [tcz]zap, please
Mario Rossi wrote:
Great!
I knew it was to easy to be missing!
just fixed in cvs for -o: and -map:
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
1 - 100 of 124 matches
Mail list logo