--
/*
* TwinHan Vision Plus USB-Ter firmware loader
*
* Copyright (c) 2004 Peter Schildmann [EMAIL PROTECTED]
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public
* License, as published by the Free
--
/*
* TwinHan Vision Plus USB-Ter firmware loader
*
* Copyright (c) 2004 Peter Schildmann [EMAIL PROTECTED]
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public
* License, as published by the Free
Hi Tobias,
On Tue, Aug 05, 2003 at 09:58:24AM +0200, Tobias Faust wrote:
mephisto:/usr/local/vdr/DVB/apps/szap # ./szap -c
/video/channels.conf -n 2
reading channels from file '/video/channels.conf'
zapping to 'Das Erste':
sat 0, frequency = 11836 MHz H, symbolrate 2750, vpid =
Hi,
On Mon, Jul 21, 2003 at 09:05:04AM +0200, Tobias Faust wrote:
has anybody a idea because i got this error?
flexcop_diseqc_ioctl: SEC_VOLTAGE_18,1
flexcop_diseqc_ioctl: SEC_TONE_ON,0
this is a debug message, not an error.
i use a skystar2 in combination with a dxr3 Hollywood+ Card. I
Hi,
here is my new Skystar2 patch for linuxtv-dvb-1.0.0-pre3.
I've substituted the mt312 frontend driver by Andreas Oberritter
for the original vp310 frontend driver.
My test system is an old Pentium 166MHz box running linux-2.4.20.
It is equipped with two DVB-S cards, a Technotrend Budget and a
Hi,
On Tue, Jul 01, 2003 at 12:21:00AM +0200, gigyz wrote:
On Mon, 30 Jun 2003 17:17:48 +0200
Jan Hendrik Berlin [EMAIL PROTECTED] wrote:
I have always troble with this card! I don't know why!
I want to use linuxtv-dvb-1.0.0-pre3 and skystar2-0.2.tar.gz !
here is a patch for
Hello Janson,
On Mon, Jan 20, 2003 at 11:18:03PM +0100, Rainer Janson wrote:
a few days ago, I add a new WinTV NOVA-s to my system. I need to change
saa7146_core.c from DVB cvs-tree, for detecting the card.
...
+ { PHILIPS_SAA7146, 0x13c2, 0x100f, CARD_INFO ttbs },
my Lorenzen DVB-s
Hello Michael,
On Mon, Jan 13, 2003 at 07:07:45PM +0100, Michael Hunold wrote:
Is the i2c speed too high? It's the same as for the DVB driver.
No. I've tested some speeds.
Did I change something essential in the i2c logic? No, I changed the new
driver to work just like the old driver did.
Hi,
On Mon, Jan 13, 2003 at 06:27:52PM +0100, Holger Waechtler wrote:
Peter, could you please verify that the a driver built fresh from the
CVS source works flawlessly for your card?
Here is a patch for the stv0299 driver that works for
the low band only. The 22KHz generation doesn't work,
Hi,
On Mon, Jan 13, 2003 at 09:12:16AM +0100, Markus Lauer wrote:
I'm using the current CVS dvb-kernel driver and built it under /build-2.4
Compilation finishs with no error.
please try the stv0299 driver from dvb-kernel CVS with the DVB CVS driver
(copy the file stv0299.c to alps_bsru6.c).
Hello Michael,
On Mon, Jan 13, 2003 at 07:07:45PM +0100, Michael Hunold wrote:
Hello Peter,
and send the trace? Perhaps we can see what's happening for the DVB
driver...
Here is the trace from the DVB driver.
Peter
Jan 13 23:12:45 mozart kernel: DVB: registering new adapter
On Thu, Jan 09, 2003 at 11:51:35AM +0100, Ralph Metzler wrote:
We have to write a new auto probing routine because there are
SU1278/SH frontends with the PLL at 0x60 and 0x61 out there.
How do you intend to differentiate between SU1278 and bsru2 tuners at
the same address?
After
Hi,
On Thu, Jan 09, 2003 at 09:06:59AM +0100, Matthias Behr wrote:
Hi,
the KNC1 card is currently not supported (the frontend get's detected as a
bsru2 and not a su1278).
I'm working on a patch but sadly I am currently really short on time.
The original stv0299 driver from dvb-kernel
, Holger Waechtler, Peter Schildmann);
MODULE_LICENSE(GPL);
+
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with unsubscribe linux-dvb as
subject.
Hi,
On Sun, Dec 22, 2002 at 09:52:39PM +0100, Matthias Lautner wrote:
- szap -r zdf produces following result:
zapping to 'ZDF':
sat 0, frequency = 11954 MHz H, symbolrate 2750, vpid = 0x006e, apid = 0x0078
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 1f |
Hi,
On Mon, Dec 09, 2002 at 12:00:28PM +0100, Holger Waechtler wrote:
We have to implement some autoprobing as you can see it in ves1820.c.
The only possibility is to use the I2C address of the TSA5059
for autoprobing - not a good solution. But I suppose that
all boards with an identical
Hi Chris,
On Sat, Dec 07, 2002 at 02:09:40PM +0100, chrisb wrote:
Hi,
...
So I added the line
{ PHILIPS_SAA7146, 0x13c2, 0x100f, CARD_INFO ttbs },
to the pci_device_ids in av7110/saa7146_core.c and the kernel module gets
loaded.
I own a Lorenzen SL DVB-S that has the same subsystem
],
[EMAIL PROTECTED]
Philips SU1278/SH
Copyright (C) 2002 by Peter Schildmann
[EMAIL PROTECTED]
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software
by Peter Schildmann
[EMAIL PROTECTED]
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later
19 matches
Mail list logo
